Abstract
Somatic cell nuclear transfer (SCNT) technology provides an opportunity to multiply superior animals that could speed up dissemination of favorable genes into the population. In the present study, we attempted to reproduce a superior breeding bull of Murrah buffalo, the best dairy breed of buffalo, using donor cells that were established from tail-skin biopsy and seminal plasma. We studied several parameters such as cell cycle stages, histone modifications (H3K9ac and H3K27me3) and expression of developmental genes in donor cells to determine their SCNT reprogramming potentials. We successfully produced the cloned bull from an embryo that was produced from the skin-derived cell. Growth, blood hematology, plasma biochemistries, and reproductive organs of the produced cloned bull were found normal. Subsequently, the bull was employed for semen production. Semen parameters such as CASA (Computer Assisted Semen Analysis) variables and in vitro fertilizing ability of sperms of the cloned bull were found similar to non-cloned bulls, including the donor bull. At present, we have 12 live healthy progenies that were produced using artificial insemination of frozen semen of the cloned bull, which indicate that the cloned bull is fertile and can be utilized in the buffalo breeding schemes. Taken together, we demonstrate that SCNT can be used to reproduce superior buffalo bulls.
Similar content being viewed by others
Introduction
Somatic cell nuclear transfer (SCNT) can contribute to genetic improvement of livestock species by supplying seed stock animals, particularly superior bulls, for breeding schemes1. Clones of superior bulls can continue to be used for breeding schemes if original bulls are unable to produce semen due to old age, infection, injury, and/or their limited frozen semen-doses are available in the semen bank1. For cloning of breeding bulls, any diploid cell of the body, including semen-derived somatic cells, can be used as nuclear donors2. Here, we used two donor cell types, namely skin-derived somatic cells (SkC) and semen-derived somatic cells (SeC) to clone a superior buffalo breeding bull. To foresee the reprogramming potential of SkC and SeC, we carried out several investigations such as cell cycle analysis of donor cells, there in vitro developmental competence and quality of produced SCNT embryos. Further, we evaluated the status of epigenetic histone markers like acetylation of H3 lysine 9 (H3K9ac) and trimethylation of H3 lysine 27 (H3K27me3), mRNA abundance of certain genes, and in vivo developmental competence of produced SCNT embryos.
Previous studies have reported that cloned cattle bulls have similar reproductive performance as their donors, and progenies of cloned bulls did not display any abnormalities3,4,5. Despite several births of buffalo clones worldwide2, no information is available on health and reproductive performance of any born cloned buffalo, which is essential if cloned bulls are aimed to be employed in the breeding schemes. Therefore, to determine the suitability of the cloned buffalo bulls for breeding schemes, we examined several postnatal parameters such as growth, hematology, blood plasma biochemistry, semen attributes, and fertility of the produced cloned bull.
Results
Culture and characterization of donor cells and distribution of their cell cycle stages
It is possible to culture somatic cells from seminal plasma, a non-invasive source of somatic cells6. In this study, we used a previously described method6 to culture somatic cells from ejaculated fresh semen of a superior breeding bull (Mu-4354). SeC appeared polygonal in shape and expressed cytokeratin-18, indicating that cultured cells belonged to the epithelial cell type; whereas, SkC belonged to the fibroblast cell type (Fig. 1A–C), which is in agreement with previous studies6,7. As reported earlier6, cell proliferation of SeC was lower than that of SkC (Fig. 1D). Before use of established somatic cells in SCNT experiments, we analyzed the distribution of cell cycle stages using flow cytometry. We observed that the higher distribution of SkC in G1/G0 cell cycle stage than that of SeC (70.1 ± 1.2 vs 60.3 ± 1.4); whereas, distribution of cells in the M stage was lower for SkC (19.1 ± 0.5 vs 23.4 ± 0.7, SkC vs SeC respectively) (Fig. 2A). And, no difference was observed for the distribution of cells in the S stage.
Gene expression analysis in donor cells
DNMTs (DNA methyltransferases) and HDACs (histone deacetylase) are responsible for epigenetic modifications of donor cells. We analyzed the relative mRNA expression of HDAC1, DNMT1, DNMT3a, and CASPASE3 and CASPASE9 genes in donor cells. Similar to the previous report6, the mRNA abundance of HDAC1 and DNMT1 was found lower in SkC than that of SeC (Fig. 2B); also, the expression of DNMT3a and CASPASE9 was observed lower in SkC than that of SeC. However, no difference was observed for CASPASE3 expression.
In vitro developmental competence of cloned embryos
In vitro developmental competence was evaluated in terms of cleavage and blastocyst rates, and the quality of developed blastocysts was evaluated by determining their total cell number and cell apoptotic index. We found similar cleavage and blastocyst rates of embryos that were produced from SkC and SeC (Table 1). Though, total cell number per blastocyst was similar among all groups, the cell apoptotic index was higher in blastocysts produced from SeC than that of SkC and IVF (Table 1), which indicate that the embryos produced from SkC were more healthy than those produced from SeC. Appropriate expression of transcription factors such as OCT3/4, SOX2, NANOG, and CDX2 is required for efficient reprogramming following SCNT and these factors are considered as markers of pluripotency8. Here, we found that mRNA expression of OCT3/4 and CDX2 was lower in cloned blastocysts than that of IVF counterpart. However, the expression of NANOG and SOX2 was comparable between blastocysts produced from SkC and IVF; whereas, it was lower in blastocysts produced from SeC (Fig. 2C).
Status of histone epigenetic markers
We studied two histone modification markers, namely H3K9ac and K3K27me3, which play an important role during early cloned embryonic development9,10,11. We observed that the levels of H3K9ac were significantly higher; whereas the levels of H3K27me3 were significantly lower in SkC than that of SeC (Fig. 3A,B). It was of further interest to investigate levels of these two epigenetic markers in cloned blastocysts when reprogramming had already completed and early differentiation process started. We observed that the level of H3K9ac was in the pattern of IVF blastocysts or cloned blastocysts of SkC greater than cloned blastocysts of SeC. Whereas, the level of H3K27me3 was in the pattern of IVF embryos less than cloned blastocysts of SkC less than cloned blastocysts of SeC (Fig. 3C,D). These results indicate that the level of these epigenetic markers maintained similar pattern from somatic cells to blastocysts following SCNT reprogramming. In addition, blastocysts produced from SkC were epigenetically more close to IVF blastocysts.
Birth of cloned bull and its post-natal development
To produce cloned bulls, we transferred one blastocyst stage embryo into the ipsilateral horn of each recipient buffalo. Eight and seven buffaloes were used as recipients to transfer blastocysts of SkC and SeC, respectively. Two recipients found pregnant following transfer of cloned blastocysts of SkC; whereas, no pregnancy was obtained with blastocysts of SeC (Table 1). Out of two positive pregnancies, one pregnancy completed full term and delivered the calf, with birth weight of 42 kg, through normal parturition; while, other pregnancy was aborted at the first trimester. DNA microsatellite based analysis confirmed the parentage of the born calf (Supplementary Table 1). We did not observe any physical and pathological abnormality in the cloned placenta. Further, no physical abnormalities in umbilicus, face, eyes, nostrils, and legs of the cloned calf were observed at birth. In addition, hematological and plasma biochemical indices of the cloned calf were within the normal reference ranges of buffalo (Supplementary Table 2). The cloned bull has no body structure deformities and has similar body mark at tail- switch which found in donor (Fig. 4). The born calf is now 40 months of age with body weight of 760 kg and has good health and producing good quality semen.
Semen production and fertility of the cloned bull
Before employing to produce semen, we confirmed that the bull is free from physical abnormalities of reproductive organs, chromosomal abnormalities, and genetically transmitted diseases (factor XI deficiency syndrome, bovine leukocyte adhesion deficiency, and bovine citrullinemia) (data not shown). Following the screening and training, the cloned bull started donating semen at 19 months of age. We recorded multiple semen parameters such as ejaculated volume, sperm concentration, and mass sperm motility, which were found similar to other non-cloned bulls, including the donor bull (Table 2). In addition, computer assisted semen analysis (CASA) variables of the cloned bulls’ sperm were also found similar to that of non-cloned bulls (Table 3). At present, we have 10000 frozen semen doses of this cloned bull and semen production is ongoing.
To predict the suitability of this cloned bull for breeding schemes, we performed in vitro and in vivo fertilization studies using cloned bull semen. In vitro blastocyst production rate (18%) of cloned bull semen was comparable to the donor bull semen (16%). Following artificial insemination with frozen semen doses, the conception rate (55%) of cloned bull semen was comparable to non-cloned bulls, including donor bull (50–60%, conception rate recorded in our institute’s buffalo farm). The progenies of cloned bull (n = 12) are healthy and have normal growth. Based on the above findings, we conclude that the produced cloned bull is fertile and can be used for breeding schemes.
Discussion
SCNT provides an opportunity to the animal breeders to restore superior bulls into breeding schemes; which otherwise could not produce semen due to old age/injury or a very limited number of their semen doses are available in the semen bank. Produced clones of superior bulls can help to extend the impact of an elite animal’s genetic by increasing supply of semen and/or embryos of the same genetics. In this study, we successfully cloned the superior breeding bull of the Murrah buffalo. The produced cloned bull has normal growth, health, and reproductive performance. Therefore, this cloned bull can be used in buffalo breeding schemes.
To clone the bull, we cultured somatic cells from two sources, skin-tissue and seminal plasma. In agreement with previous reports6,7, we confirmed that SeC belonged to an epithelial cell type and their proliferation rate was slower than that of SkC (Fig. 1). Previous studies in buffalo reported that use of G1/G0 synchronized fibroblast cells as donors improved the in vitro developmental competence of cloned embryos12. In our study, we observed that SkC were more synchronized in G0/G1 stage of the cell cycle than SeC (Fig. 2A); however, G0/G1 stage synchronization did not improved blastocyst production rate (Table 1). Several previous studies also suggested that donor cells at any cycle stage can be effectively reprogrammed and can produce cloned animals (reviewed by13).
Abnormal epigenetic reprogramming during early embryonic development is considered as a main cause of low conception rate following the transfer of cloned embryos and could also lead developmental defects in cloned animals9,10. We examined the pattern of epigenetic markers, namely H3K9ac and H3K27me3, of donor cells and attempted to understand if they translate to their corresponding embryos or altered following SCNT reprogramming. We observed that the pattern of donor cells’ epigenetic markers was similar to their corresponding embryos. However, the levels in cloned embryos of SkC were more close to IVF embryos than that of SeC embryos. In addition to epigenetic markers, the mRNA abundance of two pluripotency genes (NANOG and SOX2) was similar between cloned embryos of SkC and IVF embryos, which were found further down-regulated in cloned SeC embryos (Fig. 2C). However, the expression of OCT3/4 and CDX2 was down-regulated in cloned embryos of both cell types in compared to IVF embryos. The epigenetic and gene expression studies in donor cells indicate that donor cell source has significant effect on SCNT reprogramming, which is in agreement with previous report6.
Production of healthy progeny is the ultimate test to determine the reprogramming potential of any donor cell type. In this study, we produced the healthy calf following the transfer of cloned blastocyst of SkC. It has been reviewed that the postnatal mortality is very high in buffalo clones14. Therefore, following the birth of the cloned calf, we have taken special care and examined several post-natal parameters to monitor its health status. The calf’s hematological and plasma biochemical indices were normal, which is in agreement with the previous reports in cattle15. In addition, we followed bull’s screening procedures that are required before employing bulls for semen production including chromosomal analysis, genetic disease testing and health of reproductive organs. After the screening, the cloned bull was employed for semen production. Before this study, it was not clear whether cloned buffalo bull(s) are reproductively as competent as their donor(s), since no information was available on the reproductive performance of cloned buffalo bulls. Therefore, we have studied the reproduction potential of produced cloned bull.
The reproductive potential of the cloned bull can be evaluated by studying sperm parameters and by conducting artificial inseminations in the farm and/or production of IVF embryos in the laboratory16. In agreement with previous reports on in vitro semen attributes of cloned bulls of cattle4,5, bucks17, and boars18, we are reporting for the first time that several in vitro sperm parameters, including CASA variables and sperm fertility rate, of the cloned buffalo bull were similar to non-cloned bulls including its donor (Tables 2, 3). However, in vitro sperm parameters and IVF results do not always predict the actual fertility of bull, since sperms are complex in nature and technical variability in IVF protocols cannot be neglected16. Artificial insemination (AI) is the most accurate method to determine actual fertility of cloned bull. We found that the fertility rate following AI with the cloned bull was comparable to donor bull. At present, we have 12 live normal progenies (age ranges from 3–4 months) of the cloned bull with normal birth weights and normal growth (data not shown). We also established more pregnancies from the cloned bull semen, which are continuing. In addition to this cloned Murrah bull, we also cloned breeding bull of Assamese buffalo, which is now 14 months of age and showing normal health parameters (unpublished work).
Taken together, we conclude that SCNT can reproduce superior buffalo bulls that can be utilized in breeding schemes. Going forward, further large-scale studies and extensive data collection are required to confirm that cloned buffalo bulls and their progenies are normal, healthy and reproductively as competent as the progenies of non-cloned bulls.
Materials and Methods
Animal ethics
All experiments, including animal experiments, were conducted as per relevant guidelines and regulations laid down by the Institute Animal Ethics Committee, ICAR-Central Institute for Research on Buffaloes (CIRB), Hisar, India. This study was approved by the Institute Animal Ethics Committee, CIRB, India, and efforts were made to minimize animals’ pain and suffering, and to reduce the number of buffaloes required to complete this study. In this study, we select the superior breeding bull (Mu-4354) of Murrah buffalo that has employed in the national buffalo improvement scheme. After the birth, the cloned bull has been rearing under identical farm conditions and same food diet with non-cloned bulls at our institute’s buffalo semen production center.
Cell culture
To culture skin-derived cells, the skin tissue biopsy from the ventral side of tail origin was aseptically collected with the help of a notcher and collected tissue biopsy was processed to culture somatic cells as previously described19. To culture somatic cells from the semen, freshly ejaculated semen was processed to culture somatic cells as previously described6. Cell type characterization and in vitro growth of cultured cells were determined as previously described6. The established cells (1 × 105 cells/ml) at passage 2–3 were subjected to slow freezing at the cooling rate of 1.0 °C/ min to −80 °C in DMEM/F12 medium having 10% dimethyl sulphoxide (DMSO) and 20% fetal bovine serum (FBS), after which the cells were stored in liquid nitrogen for future use. Whenever needed, cells were thawed and cultured. Both cells types were maintained under identical culture conditions (similar culture surface and culture medium) and were used in different experiments at passage 5–10.
Cell cycle analysis
Total confluent cells from T-25 cm2 flasks were dissociated using 0.25% trypsin and fixed in chilled 70% ethanol for overnight and stored at −20 °C freezer until analysis. For cell cycle analysis, fixed cells were washed with Dulbecco’s phosphate-buffered saline (DPBS) and stained with DNA binding solution (10 µg/mL propidium Iodide, 0.1 mg/mL RNase A and 0.1% Triton X-100) for 10 min. Subsequently, cells were transferred in DPBS, and cell cycle analysis was performed using a 488-nm laser line for excitation with the same algorithm for all samples in the BD FACS LSR-II (Becton-Dickinson, Rutherford, NJ, USA). For each cell type, 10000 cells were analyzed to determine the proportion of cells in G0/G1, S, and G2/M stage using the Flowjo Cycle Analysis software (Tree Star Inc., Ashland, OR). Three independent flow runs were performed for each cell type.
Cloned embryo production and their quality assessment
Cloned embryos were produced according to the handmade cloning method, which was previously described by us19. For the production of in vitro fertilized (IVF) embryos, immature oocytes obtained from slaughterhouse ovaries were subjected to maturation followed by in vitro fertilization using frozen semen of the donor bull (Mu-4354) and the cloned bull, and fertilized zygotes were cultured as previously described20. Total cell number (TCN) and level of apoptosis in day 8 blastocysts (cloned and IVF) were determined by TUNEL staining as previously described6. For ideal comparison, both donor cell types (skin-derived and semen-derived cells) were used for the production of cloned embryos in the same SCNT experiments.
Gene expression analysis
RNA was isolated from 1 × 105 cells or blastocysts (n = 3 to 4) from three different replicates using the RNAqueous micro kit (Cat no # AM1931, Ambion, Austin, TX, USA) and subsequently converted to cDNA using superscript reverse transcriptase III kit (Cat no # 18080-051, Invitrogen). Real-time PCR based gene expression analysis was performed using the optimized primers (Supplementary Table 3) on a step one plus real-time system (Applied Biosystems, Foster City, CA, USA) with PowerUp™ SYBR® green master mix (Cat no # A25742, Invitrogen) at the following thermal cycling conditions: 50 °C for 2 min, 95 °C for 2 min, followed by 40 PCR cycles of 95 °C for 15 sec, 58 °C for 15 sec, and 72 °C for 15 sec. For ensuring specific gene amplification, a melting curve was determined for each gene and 2% agarose electrophoresis was carried out to determine the length of the amplified PCR products. β-actin mRNA was employed as an internal control for the analysis of relative transcript levels of each gene and in negative controls (H2O replaced with cDNA in the reaction tubes). For comparison, the average expression levels of each gene from skin-derived cells were set to 1 for analysis in somatic cells, whereas expression levels from IVF blastocysts produced from donor bull semen were set to 1 for analysis in blastocyst stage embryos.
Epigenetic staining
Donor somatic cells (1 × 105 cells grown on 22 mm × 22 mm glass coverslips) and blastocysts (cloned and IVF) were washed in DPBS and fixed with 4% formaldehyde in DPBS for 1 h and then permeabilized with 0.1% Triton X-100 in DPBS for 30 min, followed by 1 h blocking with 3% BSA solution in DPBS. Subsequently, somatic cells and blastocysts were incubated with primary antibodies; anti-H3K9ac (1:1000, Sigma) and anti-H3K27me3 (1:1000, Millipore), diluted in 3% BSA solution at 4 °C for the overnight period. After 5 washing with DPBS containing 0.1% Triton X-100 (DPBST) at 3 min intervals, somatic cells and blastocysts were incubated with FITC-conjugated goat anti-rabbit secondary antibody diluted 1:700 in DPBS for 90 min. Five times of washing were given with DPBST, and nuclei were counterstained with H33342 (10 µg/ml) and rinsed in DPBS. Stained somatic cells and blastocysts were then mounted on glass slides in mounting medium (2.5% DABCO in glycerol). Blastocysts images were captured using the laser confocal microscope (Leica TCS SP8) with a Plan Apo 10 ×/ 0.4 NA objective having excitation wavelengths of 488 and 561 nm, and somatic cells were imaged with 100 ×/ 1.4 NA oil immersion objective at above-mentioned wavelengths. Collection of each channel signals was done sequentially. For each wavelength, serial optical sections (Z-stack) were collected at 2.5 μm intervals through the blastocysts specimens and 0.3 μm intervals through the somatic cells specimens, with scan averaging and slow scan speed. Similar detector gain, amplifier offset, and pinhole parameters were used during all imaging experiments. Z-stacks were merged to produce two-dimensional images which depict the staining patterns and total intensities of all nuclei. The Leica LAX-1.8.1.13 software was used for image acquisition and quantitative measurements of the mean pixel intensity emitted by each individual nucleus. At least five independent images of somatic cells (8–10 nuclei from each image) or five blastocysts (~80–100 nuclei from each blastocyst) were analyzed for each epigenetic marker.
Embryo transfer
Cyclic buffaloes having functional corpus luteum and 10–12 mm dominant follicles (observed through ultrasonography) were treated with PGF2α analog (Cloprostenol, 500 µg) intramuscularly. Those exhibited estrus within 48–96 h after PGF2α analog injection were selected as recipients for cloned embryo transfer (ET). At day 8, one blastocyst was transferred into the ipsilateral uterine horn of recipient. Pregnancies were confirmed by transrectal ultrasonography at day 30 and were reconfirmed again at day 60 and 90 after ET. The CALF lab, National Dairy Developmental Board (NDDB), India, has conducted the parentage confirmation of the born calf using microsatellite markers. The whole placenta was collected and fixed in 10% neutral buffered formalin. Histology of placenta was performed using standard pathology methods.
Blood hematology
Blood samples (n = 2) from the cloned calf at 12 and 18 months of age were collected and immediately processed for the determination of hematological variables using an automatic veterinary hematological analyzer (VetScan HM5, Model No: 250735; M/s Abaxis, Pvt. Ltd, USA).
Blood plasma biochemistry
Blood samples (n = 2) from the cloned calf at 12 and 18 months of age were collected in heparinized vacutainer tubes. Collected blood samples were centrifuged at 100 × g for 5 min for separation of plasma. Biochemical parameters of plasma were estimated using automatic biochemical analyzer (Coralyzer 200, Tulip Diagnostics, Pvt. Ltd. India).
Chromosomal analysis and genetic diseases analysis
Chromosomal spreads from the fresh blood sample of the cloned calf were prepared and analyzed for chromosomal abnormalities as previously described21. In addition, the cloned calf was screened for genetic disorders, namely bovine leukocyte adhesion deficiency, bovine citrullinemia and factor XI deficiency, by the CALF lab, NDDB, India.
Ultrasonography of testes
The diagnostic ultrasound scanner (Vision 200, Model SSA 320A, Toshiba, Japan) with a 7.0 MHz micro-convex multi-frequency transducer was used to scan testes. Coupling gel was applied on the surface of the testis and on the face of the transducer. During scanning, the moderate pressure was used to press the transducer against the skin on the caudal scrotal surface; whereas, for an anterior surface, the testis was supported by hands. Each testis was examined separately with the transducer placed vertical and parallel to the long axis of the testis and was aligned so that the mediastinum testis was readily apparent as a continuous band across the image. Ultrasound images of each testis were captured and saved and evaluated for any echogenicity of testicular parenchyma and for pathological lesions.
Analysis of semen of cloned bull
The cloned bull started donating semen at the age of 19 months; the semen was collected using an artificial vagina method. Various parameters such as volume and sperm concentration of freshly ejaculated semen were recorded. Mass sperm motility score of freshly ejaculated semen were recorded on the scale of 0–5; 0 corresponds to no swirl, 1 corresponds very slow individual swirl (generalized oscillation of individual sperm only), 2 corresponds to very slow distinct swirl, 3 corresponds slow distinct swirl, 4 corresponds moderately fast distinct swirl, and 5 corresponds to rapid swirl. Following the primary observations, semen was diluted in egg yolk based extender and was loaded into 0.25 mL plastic straws (20 million sperm/straw), and then filled straws were frozen using a programmed freezer (Mini Digi-cool, IMV Technologies, L’Aigle, France) as previously described22 and subsequently stored in liquid nitrogen for long term. Percentage of progressively motile thawed sperm was visually estimated. In addition, the multiple sperm attributes such as morphometric analysis, viability, acrosome membrane integrity, and computer-assisted sperm analyzer (CASA) indices were determined in freshly ejaculated semen samples as previously described23,24. All microscopic examinations were done by a single operator to minimize variability in the results.
Fertility of cloned bull
IVF was done as described above. For artificial insemination (AI), the frozen-thawed semen from the cloned bull was used to inseminate 49 buffaloes; whereas, 60 buffaloes were inseminated with semen of its donor bull. Transrectal ultrasonography was done at day 30 after AI to detect pregnancies and positive pregnancies were reconfirmed again at day 60.
Statistical analysis
All data are expressed as means ± SEM and were analyzed using the Student’s t-test or ANOVA. The manuscript data were tested for normality and homogeneity of variances using SPSS 20 software (IBM SPSS Statistics for Windows, Version 20.0, IBM Corp Armonk, NY), and the log transformation was performed on the data which are not distributed normally before performing t-test or ANOVA. Differences between two groups were analyzed by Student’s t-test and for comparisons among more than two groups, one-way ANOVA followed by the Fisher LSD post hoc test was used. Differences were considered significant if the p-value was <0.05 (a, b & c) or <0.01 (x, y and z).
References
Bousquet, D. & Blondin, P. Potential uses of cloning in breeding schemes: dairy cattle. Cloning Stem Cells 6(2), 190–197 (2004).
Selokar, N. L. et al. Cloning of Buffalo, a highly valued livestock species of South and Southeast Asia: any achievements. Cell Reprogram 20(2), 89–98 (2018).
Heyman, Y. et al. Zootechnical performance of cloned cattle and offspring: preliminary results. Cloning Stem Cells 6, 111–120 (2004).
Shiga, K. et al. Growth and fertility of bulls cloned from the somatic cells of an aged and infertile bull. Theriogenology 64, 334–343 (2005).
Tecirlioglu, R. T. et al. Semen and reproductive profiles of genetically identical cloned bulls. Theriogenology 65(9), 1783–99 (2006).
Selokar, N. L. et al. Hope for restoration of dead valuable bulls through cloning using donor somatic cells isolated from cryopreserved semen. PloS one 9(3), e90755 (2014).
Nel-Themaat, L. et al. Isolation, culture and characterization of somatic cells derived from semen and milk of endangered sheep and eland antelope. Reprod Fertil Dev 19, 576–584 (2007).
Balbach, S. T. et al. Governing cell lineage formation in cloned mouse embryos. Dev Biol 343(1–2), 71–83 (2010).
Santos, F. et al. Epigenetic marking correlates with developmental potential in cloned bovine pre implantation embryos. Curr Biol 13(13), 1116–1121 (2003).
Xie, B. et al. Histone H3 lysine 27 trimethylation acts as an epigenetic barrier in porcine nuclear reprogramming. Reproduction 151(1), 9–16 (2016).
Saini, M. et al. Treatment of buffalo (Bubalus bubalis) donor cells with trichostatin A and 5-aza-2’-deoxycytidine alters their growth characteristic, gene expression and epigenetic status and improves the in-vitro developmental competence, quality and epigenetic status of cloned embryos. Reprod Fertil Dev 28, 824–837 (2016).
Selokar, N. L. et al. Roscovitine treatment improves synchronization of donor cell cycle in G0/G1 stage and in vitro development of handmade cloned buffalo (Bubalus bubalis) embryos. Cell Reprogram 14(2), 146–154 (2012).
Wells, D. N. Keith’s Magic: Cloning and the Cell Cycle. Cell Reprogram 15(5), 348–55 (2013).
Saini, M. et al. An update: Reproductive handmade cloning of water buffalo (Bubalus bubalis). Anim Reprod Sci 197, 1–9 (2018).
Kim, E. Y. et al. Post-death cloning of endangered Jeju Black cattle (Korean native cattle): Fertility and serum chemistry in a cloned cull and cow and their offspring. Journal of Reproduction and Development 59(6), 536–543 (2013).
Larsson, B. & Rodríguez-Martínez, H. Can we use in vitro fertilization tests to predict semen fertility? Anim Reprod Sci 60–61, 327–336 (2000).
Gauthier, M. et al. Sexual maturation and fertility of male Nigerian Dwarf goat (Capra hircus) clones produced by somatic cell nuclear transfer. Cloning and Stem Cells 3(3), 151–163 (2001).
Williams, N. E. et al. A comparison of reproductive characteristics of boars generated by somatic cell nuclear transfer to highly related conventionally produced boars. Cloning Stem Cells 8, 131–140 (2006).
Selokar, N. L. et al. Effect of post-fusion holding time, orientation and position of somatic cell-cytoplasts during electrofusion on the development of handmade cloned embryos in buffalo (Bubalus bubalis). Theriogenology 78, 930–936 (2012).
Sharma, R. et al. Optimization of culture conditions to support long-term self renewal of buffalo (Bubalus bubalis) embryonic stem cell-like cells. Cell Reprogram 13, 539–549 (2011).
Prakash, B. & Dipika, S. S. First case of centric fission in Murrah buffalo bull. Journal of Livestock Biodiversity 1, 56–57 (2009).
Kumar, D. et al. Assessment of sperm acrosome, plasma membrane, mitochondrial potential and DNA integrity by fluorescent probes in fresh, equilibrated and frozen-thawed buffalo semen. Cytotechnology 68(3), 451–458 (2016).
Kumar, P. et al. Liposome-based semen extender is suitable alternative to egg yolk-based extender for cryopreservation of buffalo (Bubalus bubalis) semen. Anim Reprod Sci 159, 38–45 (2015).
Kumar, P. et al. Quantification of leptin in seminal plasma of buffalo bulls and its correlation with antioxidant status, conventional and computer-assisted sperm analysis (CASA) semen variables. Anim Reprod Sci 166, 122–127 (2016).
Acknowledgements
The present research is financed by Indian Council of Agricultural Research, New Delhi, India and Science and Engineering Research Board, New Delhi, India (YSS/2014/000278). We are thankful to Director, ICAR-Central Institute for Research on Buffaloes (CIRB) for providing necessary facilities to conduct this study and Director, IGIB, Delhi for accessing facilities of flow cytometry and confocal microscopy. We are grateful to Dr. N. Virmani (ICAR-National Research Centre on Equines, Hisar) to perform histology of placenta, Dr. Saket Niranjan (ICAR-National Bureau of Animal Genetic Resources, Karnal) for chromosomal analysis of the cloned bull, and Dr. Rajesh for artificial insemination in buffaloes. We thank Mr. Manish Kumar for help with confocal microscopy. RKM was supported by DST-INSPIRE faculty award (IFA12-LSBM-038).
Author information
Authors and Affiliations
Contributions
N.L.S. and P.S.Y. designed the research; N.L.S., P.S., M.S. and R.R. performed most of the experiments; S.S. and P.K. completed production of semen and its analysis; J.A. performed hematology and plasma biochemistries; D.K. performed in-vitro fertilization experiments; R.K.M. performed cell cycle analysis and confocal imaging experiments; R.K.S. performed cloned embryo transfer, pregnancy diagnosis and ultrasound examinations of testes. S.K. performed care and management of recipient buffaloes, and care of the cloned bull. N.L.S. and P.S.Y. wrote the manuscript. N.L.S., D.K. and P.S.Y. contributed to reagents, consumables and laboratory work space. All authors read and gave final approval of the version to be published.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Selokar, N.L., Sharma, P., Saini, M. et al. Successful cloning of a superior buffalo bull. Sci Rep 9, 11366 (2019). https://doi.org/10.1038/s41598-019-47909-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-019-47909-8
This article is cited by
-
Insights into the roles of sperm in animal cloning
Stem Cell Research & Therapy (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.