Abstract
Structurally Divergent Reactions on Racemic Mixtures are atypical processes in Nature. The few examples reported in the literature take place in organic solvents and are driven by the reagents’ interaction with bulky chiral catalysts. Herein, we describe a dynamic combinatorial approach to generate structural divergence from racemic building blocks. The divergence is due to a stereospecific electron-donor – electron-acceptor interaction of diastereomeric macrocycles, leading to structurally distinct pseudorotaxanes. The equilibrated dynamic combinatorial library contains, amongst various macrocycles, two different types of [2]catenanes that are non-isomeric. The formation of these [2]catenanes is due to a spontaneous stereo and structurally divergent assembly of the building blocks.
Similar content being viewed by others
Introduction
Structurally divergent reactions on racemic mixtures (SDRRMs) utilise an enantiomeric mixture to produce two distinct chemical entities. This type of reaction is contrasting the predictable formation of diastereomers when two chiral entities react. SDRRM produces chemical species that are either structural isomers or non-isomeric. These species have different enthalpies of formation from starting materials that are isoenergetic. The energetic divergence observed in SDRRMs is due to each enantiomer following a different reaction pathway, and thus allowing for the formation of structurally different products. The energetic and structural divergence that occurs when these racemic mixtures react with a chiral molecule can provide insight into Nature’s chiral propagation question, as it explains how a small change at the molecular level leads to vastly different products.
To the best of our knowledge, only four SDRRMs1 have been reported in the literature2,3,4,5,6,7,8; of these, just two3,4 lead to non-isomeric structures. The structural divergence was usually achieved through the ability of one of the diastereomeric products to undergo a rearrangement or participate in a subsequent reaction with another compound present in the reaction mixture. The four known SDRRMs were developed in organic solvents and relied on structural constraints imposed by a bulky chiral catalyst.
We describe herein an aqueous SDRRM in a dynamic combinatorial environment to generate structural divergence from racemic building blocks. The reactions take place under the conditions of disulphide exchange in aqueous dynamic combinatorial libraries (DCL) and the resulting products are in stark contrast to our previous work, where enantiomers lead to the formation of diastereomers when reacted with a chiral building block9,10. In this dynamic combinatorial chemistry (DCC) system, the divergence is due to a combination of the assembly of diastereomeric macrocycles and a stereospecific electron-donor (D) – electron-acceptor (A) interaction, leading to structurally distinct pseudorotaxanes. These factors, combined with a difference in the stability of the final products, lead to the spontaneous assembly of two structurally different, non-isomeric [2]catenanes: one homochiral with a DAAD aromatic stack (Cat I RRRR), while the other is heterochiral with a DADD stack (Cat II RSRR). This work enhances our understanding of SDRRMs and raises the possibility of supramolecular interactions in aqueous media, playing a crucial role in biological homochirality11,12,13.
Results
Building block design
The building blocks used throughout this study have cysteine appendages for disulphide exchange and water solubility, having either a naphthalenediimide (NDI, electron-acceptor) or benzodithiophene (BDT, electron-donor) cores. The enantiomeric NDIs (R,R-1, S,S-1) are readily available14, and have extensively been used in dynamic combinatorial chemistry9,15,16,17,18,19. The seven step synthesis of BDT, R,R-2, is reported here (see Supplementary Fig. 1). The BDT core is an electron-donor20,21 with a large negative quadrupole moment (−23 B), thus making it an ideal partner for aromatic stacking interactions with the electron-acceptor NDI, Qzz = 14.2 B. A key feature in the structure of BDT is the presence of the two methoxy groups in positions 3 and 7, which form strong intramolecular H-bonds with the amide NH groups, thus further rigidifying the structure and making it a quasi-pentacyclic fused system. The additional rigidity makes the BDT building block more susceptible to the hydrophobic effect. The DCLs were set up by dissolving the building blocks in 10 mM aqueous NaOH to a total concentration of 5 mM. The pH was adjusted to 8 using a stock solution of 100 mM NaOH/100 mM HCl. The DCLs were stirred in the presence or absence of salt additives, and/or competitors (vide infra) for three days under air in capped vials to allow full oxidation of the building blocks. The DCL composed of 1.25 mM R,R-1, 1.25 mM S,S-1 and 2.5 mM R,R-2 contained, after the equilibrium was reached, a complex mixture of macrocycles and [2]catenanes. A detailed analysis revealed that the two enantiomers of 1 predominantly formed non-isomeric species. One of the most striking differences is the formation of the DAAD [2]catenane (Cat I RRRR), containing two NDI (R,R-1) and two BDT cores, while the S,S-1 building block led to the formation of the DADD [2]catenane (Cat II RSRR), which contains one NDI (S,S-1) and three BDT cores (Fig. 1). These [2]catenanes are non isomeric despite one common (BDT) building block interacting with enantiomeric species (NDIs R,R-1 and S,S-1). While the synthesis of [2]catenanes is in and of itself exciting, this work is set apart by the discovery of a different type of SDRRM driven by supramolecular interactions. This can open the door for the development of other divergent reactions on racemic mixtures based on aqueous, metal-free chemistry.
Homochiral DCL
To further interrogate this outcome, we set up DCLs containing R,R-2 and each of the NDI enantiomers separately. The R,R-1 (NDI) and R,R-2 (BDT) library led, in the presence of 1 M NaNO3, to the assembly of the DAAD [2]catenane (Cat I RRRR) in 76% of the total library distribution (Fig. 2, for full characterisation see Supplementary Figs. 26–35). Sodium nitrate was added in order to increase the hydrophobic effect which leads to an increase in the yield of interlocked species (Supplementary Fig. 26)16,18,22.
Heterochiral DCL
Contrasting the behaviour described above, the 1:1 S,S-1:R,R-2 library led, in the presence of 1 M NaNO3, to the assembly of the DADD [2]catenane (Cat II RSRR) in 21% of the total library distribution (Fig. 3, for full characterisation see Supplementary Figs. 36–46). Changing the building block stoichiometry to 1:3 S,S-1:R,R-2, increased the proportion of Cat II RSRR up to 41%. The other major library members consisted of a donor dimer (Y), DA heterodimer (Z) and a DAAA (RSSS) macrocycle based on three S,S-1 and one R,R-2 molecules.
Once we characterised the outcomes of the racemic (Fig. 1) and enantiopure DCLs (Figs. 2, 3), we investigated in detail the behaviour of this interesting set of libraries along with other DCLs in which we varied the ratio of the donor and acceptor building blocks, the solvent polarity and composition (Supplementary Figs. 71, 74, 81). The DCL of a racemic mixture of 1 and R,R-2 is an SDRRM because, with the exception of the DAAD catenane and the two DA heterodimers where we see some erosion of chirality, all of the other library members contain either only one of the enantiomers of 1 or a mixture of R,R-1, S,S-1 and R,R-2. All libraries have been studied at regular intervals until equilibration/full oxidation has been achieved (Supplementary Figs. 78–80). This allowed us to monitor and understand the evolution of all species involved in the assembly of Cat I RRRR and Cat II RSRR. Figure 4 depicts the major species and equilibria involved in their assembly (a full depiction of the possible library members—up to tetramers—is presented in Supplementary Fig. 91)23,24.
The kinetic study of the DCL evolution of R,R-1 and R,R-2 gives insight into the mechanism leading to the efficient assembly of Cat I RRRR (Supplementary Figs. 56–57). As expected, the first species formed in the DCL is the linear heterodimer, which is closely followed by the cyclic heterodimer (X, Fig. 2). Once a critical concentration of these two species is reached, Cat I RRRR starts to form, presumably by the threading of the linear heterodimer through the cyclic analogue, and subsequent final oxidative ring closing.
In contrast to this, the kinetic analysis of the DCL of S,S-1 and R,R-2 (Supplementary Figs. 67–68) reveals that the corresponding heterodimer Z (Fig. 3) forms in similar concentration as homodimer Y (a species not observed in the homochiral DCL, vide supra). Cat II RSRR is assembled through the complexation of an NDI core (S,S-1) in the cavity of Y, followed by ring closure. This process outcompetes the threading of the NDI core in the heterodimer Z, as indicated by the lack of the diastereomer of Cat I RSSR in this library.
The kinetic analysis of the DCL containing a racemic mixture of 1 and R,R-2 reveals a very complex behaviour, in which all building blocks combine to form linear and cyclic species. The fastest forming species are the linear homochiral heterodimer X (20% of the library, based on HPLC peak integration after 30 min of equilibration), followed by its diastereomer, the heterochiral heterodimer Z (12%). This chiral differentiation is further amplified at the cyclisation stage, as after 85 min of DCL equilibration, the homochiral heterodimer X represents 13% of the DCL, while the heterochiral heterodimer Z amounts to only 4%. At this stage, the homodimer Y accounts for 8% of the DCL (Supplementary Figs. 79–80). Based on these observations, we propose that the structural divergence observed is due to two factors: (a) the preferential formation of two of the possible nine pseudorotaxanes (Fig. 4), and (b) the relative stability of the final reaction products, Cat I RRRR and Cat II RSRR.
The first species to form in all libraries are the linear and cyclic homodimers and heterodimers25. The cyclic homochiral heterodimer X forms in a larger proportion than the corresponding heterochiral heterodimer Z in the racemic libraries, which implies that the chirality mismatch in Z leads to less effective aromatic stacking interactions between the NDI and BDT cores. This is further supported by the fact that in the S,S-1, R,R-2 library Z and the BDT homodimer Y are present in similar proportion despite that statistically, the ratio Z:Y should be 2:1 (the formation of Cat II RSRR does not influence the Z:Y ratio as it contains equal amount of both molecules in its composition).
The second key stage that contributes to the structural divergence is the formation of the pseudorotaxanes via the threading of a building block or linear dimer through the hetero or homodimers X, Y or Z. The homochiral heterodimer X will thread a NDI over a BDT core, accounting for better donor–acceptor stacking interactions (Ka2, Ka3 » Ka1). Furthermore, the threading with a R,R-1 is favoured over a S,S-1 as indicated by the formation of Cat I RRRR via pseudorotaxane F over the corresponding diastereomer G. Control experiments, in which enantiopure serine analogues of 1 were used as competitors in DCLs containing R,R-1 and R,R-2, confirmed this hypothesis as the NDI-S,S-serine lowers the yield of Cat I RRRR in comparison to NDI-R,R-serine (Supplementary Fig. 47), thus Ka2 > Ka3 » Ka1 (NDI-S,S-serine is an analogue of R,R-1, as S-serine and R-cysteine are both l-amino acids). We used DCLSim26 to simulate the DCLs in the presence and absence of the NDI-serine competitors (DCLSim part in Supporting Information). The simulated DCLs distributions are in good agreement with the observed ones and confirmed that Ka2 > Ka3.
The BDT homodimer (Y) is the dominant species after 130 min in the DCL of S,S-1, R,R-2 and, based on the stacking interactions, it likely generates the most stable pseudorotaxane (J) with S,S-1 (Supplementary Figs. 67–68). In the racemic DCL, the competing species I does not form to a large extent, as confirmed by control DCLs with the enantiopure NDI-serine analogues and by the lack of the corresponding catenane (Supplementary Fig. 74). Additionally, UV–Vis titrations of Y with the DCC inert serine analogues27 highlighted a higher association constant between Y and NDI-R,R-serine compared to NDI-S,S-serine (Supplementary Figs. 86–87), therefore Ka6 > Ka5. This inequality is supported by DCLSim calculations, which also indicate that heterodimer Z binds S,S-1 more strongly than R,R-1, with Ka9 > Ka8.
Pseudorotaxanes E, K, and H have unfavourable donor–donor stacking interactions28,29 due to the formation of an ADD stack (E, K) and a DDD stack (H) which allows us to conclude that relationship of the association constant is Ka1, Ka7 > Ka4.
As in all DCLs, the stability of the final products plays a crucial role in the composition at equilibrium. Cat I RRRR and Cat II RSRR are more stable than their corresponding diastereomers as indicated by molecular modelling (PM7, COSMO water model, see “Methods” section). The Cat I RRRR is about 36.5 kJ/mol more stable than Cat I RSSR, and about 50 kJ/mol more stable than Cat I RSRR. There is a difference in stability for the Cat II diastereomers, where the Cat II RSRR is more stable than Cat II RRRR by almost 9 kJ/mol. In this case, the selectivity for Cat II RSRR in the racemic DCL is likely due to the incorporation of R,R-1 in Cat I RRRR at the expense of Cat II RRRR. These differences are not surprising as the stacked structure of the catenanes forces the carboxylate groups to be in close proximity, therefore a change in the point chirality imposes new steric and electrostatic repulsion demands on the overall structure (Supplementary Table 6).
Discussion
In conclusion, we have merged dynamic combinatorial chemistry with structurally divergent reactions on racemic mixtures. The structural divergence is due to the formation of two diastereomeric macrocycles and stereospecific formation of pseudorotaxanes under disulphide exchange conditions. This is an example of aqueous systems chemistry in which small changes in the building blocks’ structures lead to complex molecules through interconnected mechanisms. This SDRRM is driven by supramolecular interactions and highlights the importance of stereospecific supramolecular recognition observed in Nature. Here, we showed how a chiral reagent reacts with a racemic mixture to lead to compounds with non-isomeric structures based on which enantiomer is incorporated in the final product. This type of structural divergence based on supramolecular interactions could be the seed that led to the demise of one set of protobiomolecules resulting in the observed homochirality of the biological world. We are currently investigating the formation of other conformationally restricted molecules from racemic mixtures.
Methods
Materials and characterisation
All reagents were purchased from commercial suppliers: Acros Organics, Alfa Aesar, Sigma Aldrich, TCI Europe, Fluorochem, and used without further purification. 1H and 13C nuclear magnetic resonance (NMR) spectra were recorded on 500 MHz Agilent Propulse or 500 MHz Bruker Avance II+ (1H 500 MHz, 13C 125 MHz) instruments, as stated. Chemical shifts (δ) are reported in parts per million (ppm). Coupling constants are reported in Hertz (Hz), and signal multiplicity is denoted as singlet (s), doublet (d), doublet of doublet (dd), triplet (t), dt (doublet of triplets), td (triplet of doublets), h (heptet), multiplet (m), and broad (br). All spectra were acquired at 25 °C and were referenced to the residual solvent peaks. The common solvent impurities in 1H and 13C NMR in small amounts were water, acetone or DMF. COSY, NOESY, and HSQC spectra were recorded on a Bruker AV III 500 MHz fitted with Prodigy (nitrogen-cooled) cryoprobe. The microwave reactions were carried out in either CEM Discover or CEM Explorer 12. LC-MS studies were carried out on a Thermo Surveyor PDA Plus LC and LCQ classic ESI MS. Data was processed using the XCalibur software. The individual HPLC/LC-MS methods are detailed in the LC-MS Analysis Section. The LC CD data was acquired on a Jasco CD 2095 connected to a SS420× A/D converter. All the CD data was acquired on an Applied Photophysics Chirascan spectro-photometer equipped with a Peltier temperature controller.
DCL set-up
A 5 mM library was prepared by dissolving the building block in 10 mM aqueous NaOH, followed by titration with 100 mM NaOH/100 mM HCl to adjust the pH to 8. The DCL solutions were stirred in close-capped vials and analysed by LC-MS. Preparative libraries (≥ 5 mL scale) were made using the same method as for the analytical libraries.
LC-MS method
ESI-MS spectra (negative ion) were acquired with drying temperature of 250 °C, spray current 0.5 μA, sheath gas flow of 40 arb, spray voltage was set to 4.5 kV, capillary voltage 13 V, tube lens −15.0 V. The mass range was set from m/z 150–2000, the number of microscans in scan time was 5 and the maximum injection time was 150.0 ms.
MS/MS setting
Parent mass (m/z): dependant on the species, ionisation width (m/z): 4.0, normalised collision energy (%): 20, activation Q: 0.250, activation time (ms) 30.0, the number of microscans in scan time was 5 and the maximum injection time was 150.0 ms.
Analytical HPLC method for DCLs of Cat I RRRR (5 mM)
Column: Phenomenex Develosil RPAqueous-3 C30, 5 × 0.3 cm, 3 μm. Injection volume: 2 μL; flow rate: 1 mL/min; temperature: 39 °C; run time: 7 min; elution profile: See Supplementary Table 1.
Preparative HPLC method for DCLs of Cat I RRRR (5 mM)
Column: Phenomenex Develosil Combi-RP C30, 5 × 2 cm, 5 μm; injection volume: 900 μL; Flow rate: 6 mL/min; temperature: 39 °C; Run time: 34 min; elution profile: see Supplementary Table 2.
Analytical HPLC method for DCLs of Cat II RSRR (5 mM)
Column: Phenomenex Develosil RPAqueous-3 C30, 5 × 0.3 cm, 3 μm. Injection volume: 2 μL; flow rate: 1 mL/min; temperature: 39 °C; run time: 7 min; elution profile: see Supplementary Table 3.
Preparative HPLC method for DCLs of Cat II RSRR (5 mM)
Column: Phenomenex Develosil Combi-RP C30, 5 × 2 cm, 5 μm; injection volume: 600 μL; flow rate: 6 mL/min; temperature: 39 °C; run time: 24 min; elution profile: See Supplementary Table 4.
Analytical HPLC method for DCLs of all libraries (5 mM)
Column: Restek Ultra BiPhenyl, 5 × 0.3 cm, 3 μm. Injection volume: 3 μL; flow rate: 0.5 mL/min; temperature: 39 °C; run time: 43 min; elution profile: See Supplementary Table 5.
Circular dichroism settings for isolated Cat I RRRR and Cat II RSRR analysis
The isolated catenane (after purity checking by HPLC), Cat I RRRR or Cat II RSRR, was assessed for optical and chiroptical properties. The catenane has a CD band across the 550 nm region, which is expected for D–A interaction. The experiments were done in a 1 or 10 mm pathlength cuvettes depending on the concentration, with a 4 nm bandwidth. Scan mode: 1 point/nm, time-per-point 0.5 s. The VT experiments (10 °C increment and setting time 300 s) were performed in the same cuvette using a stirrer bar.
UV–Vis titration of NDI-R,R/S,S-serine into Y
Y was prepared by dissolving the R,R-2 building block in water at pH 8 and allowed to equilibrate over two days, yielding Y homodimer as the major product (more than 90%). From this stock solution, two solutions (3.57 mM) were prepared: one containing the homodimer and 1 M NaNO3 (soln. T) and the other with NDI-R,R-serine or NDI-S,S-serine (35.7 mM, 10 equiv) and 1 M NaNO3 (soln. U). Small aliquots of soln. U were gradually added into soln. T, having 0.1, 0.3, 0.5, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5, 2.0, 3.0, 4.0, and 5.0 equiv of NDI-serine at each titration point in the final solution.
Testing reversibility with DTT
In order to test the reversible behaviour of the reactions, both Cat I RRRR and Cat II RSRR were subjected to dithiothreitol (DTT) after isolation. DTT is a dithiol-based compound that can restart the disulphide exchange and reform the library.
Computational studies
Geometry optimisation was performed using Avogadro30 (Force field: UFF, Algorithm: Conjugate gradients). This was followed by MOPAC 201631 (Version 18.117 M) optimisation PM7 semi-empirical optimisation using the COSMO water model with a 0.1 kcal/mol/Ångstrom convergence factor, using Gabedit32 2.5.0 as interface.
Data availability
The data that support the findings of this study are available within the paper and its Supplementary Information with https://doi.org/10.1038/s41467-020-17321-2 All data underlying the findings of this work are available from the corresponding author upon reasonable request.
References
Miller, L. C. & Sarpong, R. Divergent reactions on racemic mixtures. Chem. Soc. Rev. 40, 4550–4562 (2011).
Nadeau, E., Ventura, D. L., Brekan, J. A. & Davies, H. M. L. Controlling factors for C−H functionalization versus cyclopropanation of dihydronaphthalenes. J. Org. Chem. 75, 1927–1939 (2010).
Tanaka, K., Hagiwara, Y. & Hirano, M. Rh-catalyzed [4+2] annulation of 4-alkynals with isocyanates and its application to the parallel kinetic resolution of unfunctionalized 4-alkynals. Angew. Chem. Int. Ed. 45, 2734–2737 (2006).
Kato, K., Motodate, S., Takaishi, S., Kusakabe, T. & Akita, H. Parallel kinetic resolution of propargyl ketols: formal synthesis of (+)-bakkenolide A. Tetrahedron 64, 4627–4636 (2008).
Tanaka, K. & Fu, G. C. Parallel kinetic resolution of 4-alkynals catalyzed by Rh(I)/Tol-BINAP: synthesis of enantioenriched cyclobutanones and cyclopentenones. J. Am. Chem. Soc. 125, 8078–8079 (2003).
Davies, H. M. L. & Walji, A. M. Direct synthesis of (+)-erogorgiaene through a kinetic enantiodifferentiating step. Angew. Chem. Int. Ed. 44, 1733–1735 (2005).
Davies, H. M. L., Dai, X. & Long, M. S. Combined C−H activation/cope rearrangement as a strategic reaction in organic synthesis: total synthesis of (−)-colombiasin A and (−)-elisapterosin B. J. Am. Chem. Soc. 128, 2485–2490 (2006).
Gansäuer, A., Shi, L., Otte, M. Catalytic Enantioselective Radical Cyclization via Regiodivergent Epoxide Opening. J. Am. Chem. Soc. 132, 11858–11859 (2010).
Cougnon, F. B. L., Ponnuswamy, N., Jenkins, N. A., Pantoş, G. D. & Sanders, J. K. M. Structural parameters governing the dynamic combinatorial synthesis of catenanes in water. J. Am. Chem. Soc. 134, 19129–19135 (2012).
Dehkordi, M. E., Luxami, V. & Pantoş, G. D. High-yielding synthesis of chiral donor–acceptor catenanes. J. Org. Chem. 83, 11654–11660 (2018).
Soai, K., Shibata, T., Morioka, H. & Choji, K. Asymmetric autocatalysis and amplification of enantiomeric excess of a chiral molecule. Nature 378, 767 (1995).
Guijarro, A. & Yus, M. The Origin of Chirality in the Molecules of Life: A Revision from Awareness to the Current Theories and Perspectives of this Unsolved Problem. (Royal Society of Chemistry, 2008).
Brown, J. M. et al. Amplification of Chirality. Vol. 284 (Springer, Berlin Heidelberg, 2008).
Pengo, P., Pantoş, G. D., Otto, S. & Sanders, J. K. M. Efficient and mild microwave-assisted stepwise functionalization of naphthalenediimide with α-amino acids. J. Org. Chem. 71, 7063–7066 (2006).
Au-Yeung, H. Y., Pantoş, G. D. & Sanders, J. K. M. Amplifying different [2]catenanes in an aqueous donor−acceptor dynamic combinatorial library. J. Am. Chem. Soc. 131, 16030–16032 (2009).
Au-Yeung, H. Y., Pantoş, G. D. & Sanders, J. K. Dynamic combinatorial synthesis of a catenane based on donor–acceptor interactions in water. Proc. Natl Acad. Sci. 106, 10466–10470 (2009).
Au-Yeung, H. Y., Pantoş, G. D. & Sanders, J. K. M. A water soluble donor–acceptor [2]catenane that can switch between a coplanar and a gemini-sign conformation. Angew. Chem. Int. Ed. 49, 5331–5334 (2010).
Ponnuswamy, N., Cougnon, F. B. L., Clough, J. M., Pantoş, G. D. & Sanders, J. K. M. Discovery of an organic trefoil knot. Science 338, 783–785 (2012).
Ponnuswamy, N., Cougnon, F. B. L., Pantoş, G. D. & Sanders, J. K. M. Homochiral and meso figure eight knots and a solomon link. J. Am. Chem. Soc. 136, 8243–8251 (2014).
Ota, S. et al. Synthesis and properties of a benzo[1,2-b:4,5-b′]dithiophene core π-system that bears alkyl, alkylthio and alkoxy groups at 3,7-positions. RSC Adv. 3, 12356–12365 (2013).
Pai, R. K., Ahipa, T. N. & Hemavathi, B. Rational design of benzodithiophene based conjugated polymers for better solar cell performance. RSC Adv. 6, 23760–23774 (2016).
Fujita, M., Ibukuro, F., Ogura, K. & Hagihara, H. Quantitative self-assembly of a [2]catenane from two preformed molecular rings. Nature 367, 720–723 (1994).
Since the disulfide reductions do not occur in the experimental conditions, these equilibria do not describe the actual processes happening in the DCLs. However the relative difference of the Ka of various library members provides a stability ranking.
Li, J., Nowak, P., Fanlo-Virgós, H. & Otto, S. Catenanes from catenanes: quantitative assessment of cooperativity in dynamic combinatorial catenation. Chem. Sci. 5, 4968–4974 (2014).
The R,R-1 and S,S-1 homo and heterochiral homodimers are too tight to allow threading of an aromatic core through their cavity, thus remaining inactive supramolecular interactions in the DCL. These species could be ‘reservoirs’ of NDI building blocks throughout the equilibration.
Corbett, P. T., Otto, S. & Sanders, J. K. M. Correlation between host–guest binding and host amplification in simulated dynamic combinatorial libraries. Chemistry 10, 3139–3143 (2004).
Titrations performed with R,R-1 and S,S-1 reinitialize the disulphide exchange, see Supplementary Figs. 58–59, 69–70.
Cubberley, M. S. & Iverson, B. L. H NMR investigation of solvent effects in aromatic stacking interactions. J. Am. Chem. Soc. 123, 7560–7563 (2001).
Prentice, G. M., Pascu, S. I., Filip, S. V., West, K. R. & Pantoş, G. D. Aromatic donor–acceptor interactions in non-polar environments. Chem. Commun. 51, 8265–8268 (2015).
Hanwell, M. D. et al. Avogadro: an advanced semantic chemical editor, visualization, and analysis platform. J. Cheminform. 4, 17 (2012).
Stewart, J. J. P. Optimization of parameters for semiempirical methods VI: more modifications to the NDDO approximations and re-optimization of parameters. J. Mol. Model. 19, 1–32 (2013).
Allouche, A.-R. Gabedit—A graphical user interface for computational chemistry softwares. J. Comput. Chem. 32, 174–182 (2011).
Acknowledgements
We thank the Engineering and Physical Sciences Research Council (EPSRC, EB-CH1264) for funding and the EPSRC National Mass Spectrometry Service Centre (Swansea, U.K.) for high resolution mass spectrometry. We thank P. J. Pantoș, D. M. Răsădean, M. T. Huggins for helpful discussions.
Author information
Authors and Affiliations
Contributions
T.M.G. carried out the experimental work. T.M.G. and G.D.P. did the computational work. G.D.P. and T.M.G. designed the experiments. Both authors contributed to the analysis of the results and the writing of the manuscript. G.D.P. directed the research.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Gianga, TM., Pantoș, G.D. Structurally divergent dynamic combinatorial chemistry on racemic mixtures. Nat Commun 11, 3528 (2020). https://doi.org/10.1038/s41467-020-17321-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-17321-2
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.