Abstract
The use of osteometry for human identification is a key element in the field of forensic sciences. Currently, the osteometry focuses on the use of digital techniques such as photography or 3D scans, to study and measure bones, offering advantages like easy access, preservation of bones, and worldwide collaboration possibilities. The study aims to analyze whether digital tools such as Anatomage can be used to collect reliable data. The study compares measurements of the sacral bone from 41 individuals from Orgiva Collection using both traditional and digital methods. The variables analyzed were described previously, including landmarks and positions, and were coded by differentiating the measurements between dry bone (caliper) and digital measurement (Anatomage). Results indicate minimal differences between digital and dry bone measurements, with only one variable showing a significant differences in the effect size analysis (d > 0.80). The TEM analysis showed four variables as non-acceptable (rTEM > 1.5), possibly due to the landmark location or the experience using the tool to locate landmarks. Digital resources are valuable for morphometric evaluations and human identification within forensic sciences. However, caution is necessary to ensure accurate landmark localization and validate these tools across various bone types and larger sample sizes.
Similar content being viewed by others
Introduction
Osteometry uses measurements of the human body for different purposes, such as human identification, by attributing certain characteristics to an individual. Thus, it is a very useful tool in the field of forensic sciences1,2,3. Forensic anthropology uses measurements of bone to provide details such as sex, stature, and/or age; this information offers a greater probability of making a positive identification of the individual4,5,6. Several bone structures, including both the axial and appendicular skeletons, have been used to estimate sex, stature, or population affinity7. Bones such as the skull, pelvis, and teeth can be measured; each of them has a certain percentage of reliability for correct classification1,8,9,10.
In general, bones are measured by using validated instruments such as a caliper (King’s Foot) or an osteometric board. Researchers have used these tools to measure dry bones and have established landmarks with the specific purpose of human identification11,12,13. However, there are some problems with using dry bone: the conservation of the bones may not be adequate, and measurement of dry bone could lead to deterioration, wear, or alteration of its morphology (taphonomic aspects). Therefore, measuring dry bone can result in measurement bias in the defined variables14.
Currently, digital tools are implemented in forensic anthropology for identification purposes. Researchers began to use digital techniques for identification, including superposition of images, three-dimensional (3D) computer reconstructions of individualizing characteristics, and digital reconstruction of facial morphology15,16,17. In addition, this field of study uses diagnostic imaging modalities to obtain even more information than what could be obtained by measuring dry bone. Moreover, 3D scanners can replicate the bone in a digital format; these images allow analyzing the structure of bones with different software programs to facilitate the identification of individuals and develop or test a method18,19,20.
There are several software programs that allow analyzing diagnostic images, photographs, or 3D scans of bones for forensic purposes or for the analysis of different pathologies21,22. The use of diagnostic images has the advantage of faithfully representing the structure, although the measurements may have a margin of error depending on the quality of the processing. On the other hand, they have the advantage of being stored in centralized databases. This encourages multidisciplinary and international work23,24,25.
Likewise, these digital techniques help to preserve recovered bones because measurements can be made by using the digital images rather than the actual bone. In addition, images can be accessed anywhere in the world and thus analysis would not be dependent on the location of the bone24. However, the tools must be validated, and protocols must be standardized before they could be applied to forensic anthropology24,26. Among these tools, the Anatomage dissection table stands out as a teaching tool that has research potential thanks to all the tools it offers: from diagnostic image study to data acquisition with measurements. This type of tool is growing and expanding, so all its functionalities need to be tested27.
The study aims to analyze whether digital tools such as Anatomage can be used to collect reliable data. Thus, we analyzed the effectiveness of using digital tools for bone osteometry compared with traditional measurements on dry bone.
Methods
We carried out a comparative study of different methods to measure bones. We evaluated the sacral bone because we have a database of measurements of this structure for a population from Órgiva (Granada, Spain)28 at our disposal. Furthermore, we scanned the same structures with an Artec 3D scanner to generate digital images that could be used for measurements. The database consists of 60 individuals for which we have the age, sex, and a record of all measurements on the sacral bone. All the methods were carried out in accordance with relevant guidelines and regulations considering that the sample were donated by Órgiva Cemetery and consisted of skeletal remains from a mass grave. The mass grave was exhumed, and the skeletal remains were donated to the University of Granada. The eligibility of the final sample had to meet the following selection criteria: to have all the variables to be analyzed for each of the structures.
An Excel database containing the main variables identified by Gaya-Sancho29 was used for comparison with the digital measurements. The original measurements were made with a sliding caliper and only those with a measurement agreement greater than 0.9 (ICC classification) were included (Gaya-Sancho et al.29). These measurements were defined by the mentioned author anatomically in order to locate the landmarks manually and visually.
We used the Anatomage (Anatomical Dissection Table) to make the same measurements (under the same definitions for landmarks) of digital images of the sacral bones as had been done on the actual bone. The measurements were performed on three-dimensional structures scanned directly on the Anatomage® dissection table, and the defined landmarks could be located by rotating and moving the structure to ensure correct accuracy for location.
We registered the variables with a number (1 or 2) to identify whether it is the dry bone measurement (1) or the digital measurement (2). Table 1 shows the definition and acronyms of each variable as defined by Gaya-Sancho et al.29. Each variable includes lateralization (L: Left or R: Right) and all the variables were taken in mm.
We recorded the measurements in situ by using the same database that had been configured in JAMOVI v.2.3.18. After we recorded and compiled the variables, we analyzed the normality of the data with the Shapiro–Wilk test. Because the data had a normal distribution, we used Student's t test for paired samples to compare the measure of each variable taken from dry bone and taken from digital images. We considered p < 0.05 to be statistically significant. Finally, we determined the effect size by calculating Cohen's d. This approach allowed us to analyze the power of any significant differences30,31.
Finally, a study of the TEM and the correlation coefficient between the different observations was carried out using RStudio to evaluate the differences in measurement and observation between the different methods32,33 following the International Society for the Advancement of Kinanthropometry (ISAK) recommendations. The cut-off point for interpretation is set at 1.5% for RTEM to be considered acceptable for a beginner anthropometrist34.
Results
We recorded measurements of the variables for 41 of the 60 available individuals. We excluded the remaining 19 individuals because they did not have a record of all the measures for each structure. Landmark localization was performed without incident according to the definition of Gaya-Sancho et al.29. The ability to move the structure to locate these landmarks facilitated the data collection process.
Table 2 shows the descriptive statistics (mean and standard deviation) for each variable. For all the variables obtained with the digital tool Anatomage, the mean tends to be higher when considering the scans. On the other hand, the standard deviation values of each variable, obtained both manually with the caliper and digitally, remain more homogeneous without showing any trend.
Table 3 shows the statistical analysis comparing the measurements with dry bone and digital images.
Of the 12 variables, only five showed significant differences between the dry bone and digital image measurements. However, only one of these variables had a large effect size (STL); the other four variables had a low (SCW) or moderate (MSTL, MITL, and MSW) effect size. The effect size analysis showed that, despite finding significant differences, the impact of these differences is not high except for STL. This large effect size implies larger differences between the STL means, which could be due to the location of the landmarks themselves, the experience of using the digital tools to locate and thus measure the landmarks, or the variability that could be found in digitizing bones.
Additionally, Table 3 shows the mean differences, which provide some interesting insights. First, although MSTL was significantly different between the dry bone and digital image measurements, the mean difference was only 0.099 mm. Second, the mean difference for most variables was < 0.25 mm (except for RLC and MSW), even when there was a significant difference between the measurement methods.
Table 4 shows the result for the TEM analysis and the reliability between observations. The “Non acceptable” of this error analysis based on rTEM is observed for four of the variables. Moreover, these variables coincide with those that show significant differences between observations (Table 3). This could be explained by the experience using the tool for this purpose.
The variable MSTL shows significant differences, although the TEM analysis provides an acceptable result for these observations. In this case, the variable shows a small deviation in the mean difference (Table 3) between the two methods of measurement. According to the formulas proposed for the sacrum28,29, this variable is not included in those that give a higher percentage of reliability, so its applicability is not compromised.
For all these reasons, digital tools make it possible to analyze structures despite the differences observed in most of the variables analyzed. These digital tools make it easier to obtain data by allowing resources to be manipulated, zoomed, and managed efficiently.
Discussion
The use of digital measurements within forensic sciences is growing. Hence, the effectiveness of the available software programs and tools must be evaluated to ensure their accuracy, as traditional measurements have proved to be. Validating these digital tools could facilitate the creation of new methods of human identification.
Diagnostic images and 3D models of bones have begun to be used because they faithfully represent the scanned structure and allow a macroscopic and morphometric analysis of them. Abbeg et al.35 analyzed skulls using computed tomography (CT) and a 3D scanner; they highlighted that there may be discrepancies between the measurements, similarly to what we have found in the present study. Thus, it is necessary to reconsider, on some occasions, the landmarks that are used. Landmark localization as determined by Lou et al.36 and Jerkovic et al.37, may be inaccurate at first, although landmark localization improves with repeated practice. The differences found in our results could be caused by this phenomenon. Therefore, further research with a larger number of structures is recommended.
Sevillano et al.38 demonstrated that there is a high correlation between traditional and virtual measurements for the models they analyzed. Colman et al.39, Banik et al.40, and Citardi et al.41 analyzed the differences between dry bone measurements and 3D virtual models. Although they obtained variable results, there was a generally good agreement between the observations taken digitally and those taken on dry bone. This means that the use of new digital tools and virtual 3D techniques can currently provide added value to identification in forensic anthropology.
Researchers have also used digital tools, images of diagnostic tests, and resources such as artificial intelligence (AI) to evaluate and/or estimate identifying aspects of humans, such as sex and age. This research suggests that the implementation of neural networks can enhance and greatly benefit the work of anthropologists42,43. Some researchers have used 3D models, diagnostic tests, or 3D structures generated by scanners for validation or to create models to estimate individual characteristics; these authors reported results ranging from 74 to 91.40% success for the discriminant functions developed to estimate sex44,45.
Based on our results and the literature, we recommend continuing validating digital tools by examining other bones. All these results suggest that the integration of digital tools for the study of bone remains can be equated to that carried out with in dry bone. In addition, the availability of these digital files of digitized bones would help to perform the analysis even when the bone remains are not in the same location as the researcher, since they can be sent and managed through digital files.
These efforts could validate the virtual dissection table as a potentially useful tool for handling, studying, and measuring bones in forensic anthropology. These efforts could help to create virtual datasets of bone collections so that these structures can be studied in the future as they can be digitally preserved46.
Conclusions
Digital resources are useful to analyze bone because they allow measuring structures for morphometric evaluation and human identification within forensic sciences. However, these tools must be used with caution because the 3D manipulation of these structures, under a screen, could skew the information and the exact location of the landmarks in the structures. We only found a few significant differences between the dry bone and digital measurements, and they had a relatively low impact level. Nevertheless, digital tools must continue to be validated in larger samples and for different bones, and even anthropometric measurements.
Data availability
The data that support the findings of this study are available from the corresponding author, [G-S B], upon reasonable request.
References
Couto, D. M. S. et al. Brazilian’s dental anthropometry: Human identification. J. Forensic Dent. Sci. 11, 73 (2019).
Ubelaker, D. H. Recent advances in forensic anthropology. Forensic Sci. Res. 3, 275–277 (2018).
Işcan, M. Y. Global forensic anthropology in the 21st century. Forensic Sci. Int. 117, 1–6 (2001).
Moosa, S. S. et al. Sexual dimorphic parameters of femur: A clinical guide in orthopedics and forensic studies. J. Med. Life 14, 762–768 (2021).
Robling, A. G. & Ubelaker, D. H. Sex estimation from the metatarsals. J. Forensic Sci. 42, 14261J (1997).
Ubelaker, D. H. & Khosrowshahi, H. Estimation of age in forensic anthropology: Historical perspective and recent methodological advances. Forensic Sci. Res. 4, 1–9 (2019).
Spradley, K. & Jantz, R. What are we really estimating in forensic anthropological practice, population affinity or ancestry?. Forensic Anthropol. 4, 309–318 (2021).
Kranioti, E. F., García-Donas, J. G., Can, I. O. & Ekizoglu, O. Ancestry estimation of three Mediterranean populations based on cranial metrics. Forensic Sci. Int. 286, e1–e8 (2018).
Mulu, A. & Sisay, B. Estimation of stature from arm span, arm length and tibial length among adolescents of aged 15–18 in Addis Ababa, Ethiopia. Ethiop. J. Health Sci. 31, 1053–1060 (2021).
Haj Salem, N. et al. Age estimation from the sternal end of the fourth rib: A study of the validity of Işcan’s method in Tunisian male population. Leg. Med. 16, 385–389 (2014).
Khan, R., Satyapal, K. S., Naidoo, N. & Lazarus, L. Dimensional analysis of the bicipital groove and its associated pathology in a South African population. J. Orthop. 19, 128–131 (2019).
Ulcay, T., Kamaşak, B., Görgülü, U. A. & Aycan, K. A golden ratio for foramen magnum: An anatomical pilot study. Folia Morphol. 81, 220–226 (2022).
Bookstein, F. Morphometric Tools for Landmark Data (Cambridge University Press, 1997).
Caruso, V. et al. A comparative analysis of microscopic alterations in modern and ancient undecalcified and decalcified dry bones. Am. J. Phys. Anthropol. 165, 363–369 (2018).
Damera, A., Mohanalakhsmi, J., Yellarthi, P. & Rezwana, B. Radiographic evaluation of mandibular ramus for gender estimation: Retrospective study. J. Forensic Dent. Sci. 8, 74 (2016).
Weber, G. & Bookstein, F. Virtual Anthropology: A Guide to a New Interdisciplinary Field (Springer, 2011).
Aulsebrook, W. A., Işcan, M. Y., Slabbert, J. H. & Becker, P. Superimposition and reconstruction in forensic facial identification: A survey. Forensic Sci. Int. 75, 101–120 (1995).
Davy-Jow, S. L., Lees, D. M. B. & Russell, S. Virtual forensic anthropology: Novel applications of anthropometry and technology in a child death case. Forensic Sci. Int. 224, e7 (2013).
Sorrentino, R. et al. Exploring sexual dimorphism of the modern human talus through geometric morphometric methods. PLoS One 15, e0225955 (2020).
Colman, K. L. et al. Virtual forensic anthropology: The accuracy of osteometric analysis of 3D bone models derived from clinical computed tomography (CT) scans. Forensic Sci. Int. 304, 109963 (2019).
Maret, D., Peters, O. A., Dedouit, F., Telmon, N. & Sixou, M. Cone-beam computed tomography: A useful tool for dental age estimation?. Med. Hypotheses 76, 700–702 (2011).
Marroquin, T. Y. et al. Age estimation in adults by dental imaging assessment systematic review. Forensic Sci. Int. 275, 203–211 (2017).
Aghayev, E. et al. Virtopsy: The concept of a centralized database in forensic medicine for analysis and comparison of radiological and autopsy data. J. Forensic Leg. Med. 15, 135–140 (2008).
Yen, K. et al. Post-mortem forensic neuroimaging: Correlation of MSCT and MRI findings with autopsy results. Forensic Sci. Int. 173, 21–35 (2007).
Gualco, M., Benzi, D. & Fulcheri, E. Applicazioni e vantaggi dei sistemi multimediali nella pratica autoptica [Applications and advantages of a multimedia system for autopsies]. Pathologica 93, 517–530 (2001).
Cummaudo, M. et al. Age estimation in the living: A scoping review of population data for skeletal and dental methods. Forensic Sci. Int. 320, 110689 (2021).
Homepage: Anatomage. https://eu.anatomage.com/?gclid=CjwKCAjwysipBhBXEiwApJOcuxk1uFhMjHIfyD7zpVtD8xfnXznNmSxHxYGZS4dXPNWyzAsBsfcKKhoCqQYQAvD_BwE.
Gaya Sancho, B. Estudio Morfométrico del Sacro. Estimación del Sexo y Comparación de Poblaciones Actuales. (2019).
Gaya-Sancho, B., Alemán Aguilera, I., Navarro-Muñoz, J. J. & Botella López, M. Sex determination in a Spanish population based on sacrum. J. Forensic Leg. Med. 60, 45–49 (2018).
Peng, C. Y. J. & Chen, L. T. Beyond Cohen’s d: Alternative effect size measures for between-subject designs. J. Forensic Leg. Med. https://doi.org/10.1080/00220973.2012.74547182,22-50 (2013).
Lee, D. K. Alternatives to P value: Confidence interval and effect size. Korean J. Anesthesiol. 69, 555–562 (2016).
Jamaiyah, H. et al. Reliability, technical error of measurements and validity of length and weight measurements for children under two years old in malaysia. Med. J. Malay. 65, 131–137 (2010).
Perini, T. A., De Oliveira, G. L., Dos, J., Ornellas, S. & De Oliveira, P. F. Technical error of measurement in anthropometry. Rev. Bras. Med. Esporte 11, 1–10 (2023).
Norton, K., Olds, T. & Commission, A. S. Anthropometrica: A Textbook of Body Measurement for Sports and Health Courses, 413 (1996).
Abegg, C. et al. Virtual anthropology: A preliminary test of macroscopic observation versus 3D surface scans and computed tomography (CT) scans. Forensic Sci. Res. 6, 34–41 (2020).
Lou, L., Lagravere, M. O., Compton, S., Major, P. W. & Flores-Mir, C. Accuracy of measurements and reliability of landmark identification with computed tomography (CT) techniques in the maxillofacial area: A systematic review. Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endodontol. 104, 402–411 (2007).
Jerković, I. et al. The repeatability of standard cranial measurements on dry bones and MSCT images. J. Forensic Sci. 67, 1938–1947 (2022).
Sevillano Oriola, L., Armentano Oller, N. & Martínez-Abadías, N. Virtual anthropology: Forensic applications to cranial skeletal remains from the Spanish Civil War. Forensic Sci. Int. 341, 11504 (2022).
Colman, K. L. et al. The accuracy of 3D virtual bone models of the pelvis for morphological sex estimation. Int. J. Legal Med. 133, 1853–1860 (2019).
Banik, S. et al. Comparative morphometry of the sacrum and its clinical implications: A retrospective study of osteometry in dry bones and CT Scan images in patients presenting with lumbosacral pathologies. Cureus 14, 22306 (2022).
Citardi, M. J. et al. Comparison of scientific calipers and computer-enabled CT review for the measurement of skull base and craniomaxillofacial dimensions. Skull Base 11, 5–11 (2001).
Cao, Y. et al. Use of deep learning in forensic sex estimation of virtual pelvic models from the Han population. Forensic Sci. Res. 7, 540–549 (2022).
Thurzo, A. et al. Use of advanced artificial intelligence in forensic medicine. Forensic Anthropol. Clin. Anat. Healthc. 9, 1545 (2021).
Karagiorgou, I., Anastopoulou, I., Karakostis, F. A., Kranioti, E. & Moraitis, K. Sexing the sternal rib end in modern Greeks: A virtual osteometric approach using high-resolution 3D surface models. Homo 73, 69–76 (2022).
Ekizoglu, O. et al. Virtual morphometric method using seven cervical vertebrae for sex estimation on the Turkish population. Int. J. Legal. Med. 135, 1953–1964 (2021).
Villa, C., Buckberry, J. & Lynnerup, N. Evaluating osteological ageing from digital data. J. Anat. 235, 386–395 (2019).
Author information
Authors and Affiliations
Contributions
Conceptualization: B.G.-S., D.S.-S. Data Curation: B.G.-S., D.S.-S., A.R.-P. Formal Analysis: B.G.-S., A.R.-P., S.G.-A. Funding Acquisition: B.G.-S., B.S.-G. Investigation: B.G.-S., S.G.-A. Methodology: B.G.-S., D.S.-S., A.R.-P., S.G.-A. Project Administration: B.G.-S., B.S.-G. Resources: B.G.-S. Software: B.G.-S., D.S.-S., A.R.-P., S.G.-A. Supervision: B.G.-S., L.Z.-P., B.S.-G. Validation: B.G.-S., B.S.-G. Visualization: B.G.-S. Writing—Original Draft Preparation: B.G.-S. Writing—Review & Editing. B.G.-S., D.S.-S., A.R.-P., S.G.-A., L.Z.-P., B.S.-G.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Gaya-Sancho, B., Sanjuan-Sánchez, D., Ráfales-Perucha, A. et al. Comparison of measurements made on dry bone and digital measurements in Anatomage for the sacral bone in a Spanish population. Sci Rep 13, 20578 (2023). https://doi.org/10.1038/s41598-023-48013-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-023-48013-8
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
