Abstract
Subaqueous, asymmetric sand waves are typically observed in marine channel/canyon systems, tidal environments, and continental slopes exposed to strong currents, where they are formed by current shear resulting from a dominant unidirectional flow. However, sand-wave fields may be readily observed in marine environments where no such current exists; the physical processes driving their formation are enigmatic or not well understood. We propose that internal solitary waves (ISWs) induced by tides can produce an effective, unidirectional boundary “current” that forms asymmetric sand waves. We test this idea by examining a sand-wave field off the Messina Strait, where we hypothesize that ISWs formed at the interface between intermediate and surface waters are refracted by topography. Hence, we argue that the deflected pattern (i.e., the depth-dependent orientation) of the sand-wave field is due to refraction of such ISWs. Combining field observations and numerical modelling, we show that ISWs can account for three key features: ISWs produce fluid velocities capable of mobilizing bottom sediments; the predicted refraction pattern resulting from the interaction of ISWs with bottom topography matches the observed deflection of the sand waves; and predicted migration rates of sand waves match empirical estimates. This work shows how ISWs may contribute to sculpting the structure of continental margins and it represents a promising link between the geological and oceanographic communities.
Similar content being viewed by others
Introduction
Both south and north approaches of the Messina Strait (Mediterranean Sea) are characterized by the presence of sand-wave fields (Fig. 1) that mark the strong tidal processes affecting this region1. The Strait connects the Ionian Sea with the Tyrrhenian Sea and is, indeed, an amphidromic point for the semi-diurnal tide of these two sub-basins (Fig. 1). The phase opposition of these tides, along with topographic constraints, forces very intense tidal currents that reach 3 m/s at the sill region1. This tidal mechanism causes a periodic (semi-diurnal), northward flux of the denser Levantine Intermediate Water (LIW) underneath the Tyrrhenian surface water (TSW) (Fig. 2; see Supplementary Information).
The sand-wave field we focus on forms off the north entrance of the Messina Strait, between ~200 m and ~300 m depth, running along a topographic mound offshore of Capo Rasocolmo (Fig. 1). This mound is 6–7 km wide, 100–150 m high and extends for about 10 km along a SW-NE direction; seafloor sampling recovered mostly sand (mean grain size ~0.5 mm) along its southern flank2. The intriguing feature that makes the sand-wave field worth investigating is the deflected orientation of the bedforms, which run transversally along the 275 m isobath and climbs upwards with a counter-clockwise pattern, until crossing the 200 m isobath (Fig. 1). The sand waves cover an area of about 3 km2 and have wavelengths of 60–120 m, wave heights of 1.5–5 m, and lateral extent of 100–300 m; in general, wave dimensions tend to increase northward (Fig. 1).
The sand-wave field was first reported by Selli et al. [ref. 3] and Colantoni [ref. 4], and its morphodynamic is relevant for pipelines stability2,5. Monitoring of a pipeline that brings Algerian gas to the European mainland revealed that some portions of the pipe are exposed above wave troughs while other segments are buried under sandy-gravelly sediment, providing evidence that the sand-waves are mobile2,5. These studies hypothesize a migration rate from 10−2 to 1 m/year, based on semi-quantitative considerations2,5. Santoro et al. [ref. 5] report differences in the geometry of the sand waves among repetitive bathymetric surveys conducted in 1991 and 2001. The height of the bedforms increased approximately twofold everywhere in the field, whereas their wavelength decreased at depth lesser than 218 m, suggesting reworking and/or migration of sand-waves. The sand-wave field is characterized by coarse sediment with grain size that ranges from coarse sand to gravel, suggesting the presence of high bottom velocities able to mobilize the grains and remove finer material3,5.
Although setting an interesting problem, these works did not attempt to make a mechanistic connection between oceanographic and sedimentary processes in explaining the formation of the sand-wave field. In fact, Selli et al. [ref. 3] and Colantoni [ref. 4] suggested that the presence of the sand waves was due to tidal-induced bottom currents. Santoro et al. [ref. 5] attributed this bottom current to a combination of tidal, upwelling, and thermohaline effects, and suggested that the migration velocity of the sand waves decreases with increasing depths due to differences in the hydrodynamic forcing. None of these hypotheses, however, takes into consideration the role of internal waves propagating along the LIW-TSW interface6,7,8 and their shoaling effects9,10.
Refracting Internal Solitary Waves for sand-waves generation and migration
Sand waves generally form in those tidal environments where the interaction between seafloor morphology and tidal currents is strong enough to allow for the necessary shear stress that triggers sediment motion11,12,13,14,15. Sand-wave formation can be also due to downslope-flowing turbidity currents, along-slope bottom currents, and internal (progressive or solitary) waves9,10,16,17. Although the investigated region is a tidal environment, also characterized by a strong thermohaline circulation1, both location and spatial pattern of the sand waves do not suggest the action of either tidal or quasi-geostrophic currents as the main cause of sand motion: i) the sand-wave field is located in a deep region, rather far from the sill; ii) the northward thermohaline flow of the LIW current that would eventually form sand waves does not exceed 20 cm/s [ref. 8] and its known to flow geostrophically on the eastern side of the Tyrrhenian approach of the Strait18,19; iii) both tidal and/or thermohaline bottom currents cannot justify the deflected pattern of the studied sand waves; iv) the eventual oscillatory velocity field induced by tidal currents and/or internal progressive waves would not explain the asymmetric shape of the sand waves; and iv) there is no reason why the sand-wave size would decrease with decreasing water depth, as observed in the field3,4.
We argue that the process behind such an intriguing depth-dependent orientation of the asymmetric sand waves must be related to the presence of Internal Solitary Waves (ISWs) that travel northward form the sill of the Messina Strait6,7,8 (Fig. 2; see Supplementary Information). These ISWs (i.e., large-amplitude internal gravity waves generated by the interaction of tidal currents with the sill of the Strait) are triggered when the denser Ionian water suddenly debouches in the less dense Tyrrhenian water: internal gravity waves generate in the Messina Strait by the interaction of barotropic tidal currents with the bathymetry in well-stratified water conditions; under certain circumstances, the internal tide can transform into a set of high frequency, non-linear internal waves (Fig. 2); internal waves dynamics is strongly ruled by the nonlinearity of the phenomenon (which would lead to a breaking wave) and by the dispersion of the media; when these two effects are balanced, coherent structures emerge from an initial disturbance and travel as Internal Solitary Waves (ISWs), also called solitons7.
We therefore explore the idea that ISW refraction caused by interaction with the mound offshore of Capo Rasocolmo (Fig. 1; Supplementary Fig. S1), and thus magnitude and orientation of fluid stresses that would result from passage of ISWs, is at the base of the sand waves formation. The hypothesis of ISWs that can remobilize the bottom sediment according to the spatial pattern of the sand-wave field is supported by current-meter and hydrographic measurements, as well as by a numerical experiment5,8,20 (Fig. 3; Supplementary Movie S1). The two main processes that would explain both the presence and the pattern of the sand-wave field are therefore as follows: i) the sedimentary mound (Fig. 1) would induce wave refraction, deflecting the ISW vector toward shallow areas (Figs 1 and 3, and Supplementary Fig. S1); the trough of the ISW would mainly contribute to the intense (i.e., > 50 cm/s) horizontal velocity at the bottom, triggering sediment motion along the direction of the wave vector8 (Figs 2 and 3d, and Supplementary Fig. S2). This latter feature points out the main difference between internal progressive waves and ISWs in moving sand along the wave vector: internal progressive waves would cause an oscillating motion, leading to symmetric sand waves, while the passage of an ISW induces a unidirectional momentum to a fluid parcel21,22 (Figs 2 and 3, and Supplementary Fig. S2), which agrees with the asymmetric pattern of the sand waves off Capo Rasocolmo.
A theoretical framework for ISWs is the well-known Korteweg-de Vries (KdV) equation, which describes the waveform for weakly dispersive non-linear internal waves propagating in straits of uniform and shallow depth in two-layer fluid7,23 (Supplementary Information). This model, however, did not consider any uneven topography and the consequent refracting effects of the ISWs. Further generalizations of the KdV model allow for a description of ISWs over a slowly varying topography24,25,26,27. In particular, Grimshaw et al. [refs 24 and 25] model ISWs behavior near the coast by using the Korteweg- de Vries equations with variable coefficients (i.e., the vKdV and the Gardner e-vKdV equations), which describe the shoaling and deformation of ISWs over the continental shelf. We here use a ray method that allows us to take into account the second horizontal dimension and thus to investigate wave refraction while, along a ray, the generalized KdV equation remains valid for a slowly varying depth28.
In a shallow water approximation, the analytical solution of the KdV equation for a single ISW is (Fig. 3e and Fig. 4a).
where c′ is the non-linear phase speed, L is the measure of the width of the soliton solution (i.e., the scale length), and η0 the initial ISW amplitude (Supplementary Information). We point out here that the phase speed of an ISW depends on the depth ratio between the two layers and the reduce gravity (Fig. 4a), stressing the role of topographic effects on ISW dynamics: a change of bottom layer thickness strongly affects both phase speed and wave polarity (Supplementary Information).
In accordance with the KdV model, particle trajectories induced by the presence of a soliton are not closed during the passage of an ISW, and thus there is no backward motion21,22 (Figs 2 and 3d, and Supplementary Fig. S2). All particles, therefore, move in the same direction (not exceeding the travelling-wave speed) and the horizontal water velocity in the lower layer is in the opposite direction of that in the upper layer (Supplementary Information). However, according to the vKdV and the Gardner e-vKdV equations on the ISW deformation over a varying topography25, a concave-up ISW is affected by shoaling and changes its polarity24. Indeed, when ISWs propagate over a variable seafloor, the ensuing topographic gradients along with the current-wave interaction can cause a drastic change in the direction, length, polarity, and height of waves. This phenomenon can be ascribed to the wave refraction over the sloping seafloor29. Similar to the refraction occurring on continental shelves29,30,31 the hypothesized process strongly orients the internal-wave crest lines along isobaths (Figs 3a–c and 4b; see also Fig. S1).
Results
This ISW refraction is described by using a non-linear ray method that leads to a ray equation of linear long wave theory of the type of Snell’s law28,31
where θ is the angle between wave crest and depth contour at an arbitrary depth, θ0 is the angle between wave crest and depth contour in deep-water (Fig. 4), c is the wave celerity at an arbitrary depth, and c0 is the deep-water wave celerity. By defining the ray trajectory as one obtains
where and
Equation (3) describes the deflection of the ISW vector in terms of Ks and the bottom-dependent wave celerity c(y), which in turn depends on the slowly varying bottom layer thickness h2 = h2(y) (Fig. 3a). The solution of equation (3) gives the trajectory x = x(y) of the refracted ISW that runs along the sedimentary mound (Fig. 4b) as a function of the initial angle between the ISW vector and the bathymetry in the deepest part of the sand-wave field (Supplementary Information). Numerical, theoretical and current-meter data8,20,28 support our initial hypothesis that the topographically-induced ISW refraction generates the deflected sand-waves pattern (Fig. 3).
Regarding the ISW ability to remobilize sediment and form sand waves, the KdV model demonstrates the presence of bottom velocity peaks underneath the ISW trough ~60 cm/s [ref. 23] over the region where the sand-wave field forms (i.e., from h2 = 200–100 m). This theoretical estimate is in agreement with in situ current-meter data (Fig. 3d and Supplementary Fig. S2) and gives a shear velocity ( ~ 0.1 m/s) that exceeds the critical shear velocity ( ~ 0.07 m/s) associated to the grain size measured on the sand-wave field3 (Supplementary Information). Moreover, these quantities set the proportionality between the height/depth ratio of sand waves dimensionless excess tractive force15. By considering a wave height of 5 m it results a water depth of ~100 m, which approximately correspond to the depth of the bottom layer (h2) (Fig. 2b). We finally stress that bottom velocity usually consists of several components, e.g., barotropic tidal flows, baroclinic internal tides and internal solitary waves. However, current meter data show that the bottom shear velocity due to solitary waves is the dominant component, contributing up to 70% of the whole signal (Fig. 2c and Supplementary Fig. S2).
For large h2≫h1, the ISW-induced velocity field would have the opposite direction with respect to the northward wave propagation. However, in shallow conditions (h2~h1 or h2 < h1) and under the presence of external shear flows (as for the case of the sand-wave field region) the ISW changes its polarity23,32,33,34,35. The topographic mound off Capo Rasocolmo is therefore expected to affect the concavity of the ISW formed at the sill of the Messina Strait. This is confirmed by current-meter and morphologic data (Figs 1 and 3d) that show a northward (and stronger) sediment flux (i.e., northward bottom velocity peaks and a lee side of sand waves that faces towards north), again in agreement with the theoretical expectations24,25,27.
Knowledge of bottom velocity, critical shear stress, and geometrical characteristics of the sand waves allows for the estimation of migration rate , which is given by the relation for sediment flux () associated with sand waves formation and migration36:
where ϕ is a porosity coefficient (~1), H is the sediment wave height, and qs is the sediment flux as obtained by using the revised Mayer-Peter Müller formula37 for all bottom velocity events (i.e., those associated to the ISW passage) for which u* – u*cr > 1. From equation (4) and the estimation of we therefore obtain a migration rate of ~10−1 m/year (Supplementary Information), a value that lays in between the values hypothesized and semi-quantitatively found by previous work2,5.
Conclusions
Our results give fundamental explanations regarding: i) driving forces, ii) migration rate, and iii) spatial distribution (i.e., deflected pattern) of the sand waves off Capo Rasocolmo, therefore providing an extremely useful case study for similar sedimentary structures9,10,17. Only the passage of ISWs is able to justify the deflected pattern caused by the refraction process and the unidirectional velocity field associated to the wave trough that explains, in turn, sediment transport and migration rate of the asymmetric sand waves. We therefore demonstrate that this kind of sand waves can be formed by ISWs, so providing a case study to recognize and quantify hydrodynamic drivers for a specific seafloor morphology. This may help to estimate flow conditions from seafloor mapping, an information of large environmental and engineering relevance38,39.
There are very few studies that put emphasis on the relation between ISWs and sand dunes or, in general, sediment resuspension17,40. Our findings represent a quantitative study on the role of ISWs for coarse-grained sediment transport in the deep sea that may lead to a better understanding of sedimentary processes and seafloor evolution, which is critical for geohazard assessment5,38,39,40,41. Although the northern entrance of the Messina Strait is morphologically peculiar, we believe that ISW-induced sand waves would occur worldwide and that they have not yet interpreted in this way. The distinctive formation mechanism related to ISWs was proposed, only recently, for very large sand dunes located on the continental slope of the South China Sea17. This therefore reinforce the idea that the occurrence of ISWs-sand waves might have been underestimated.
Methodology
Multibeam bathymetry in the study area was collected during 5 oceanographic cruises carried out between 2005 and 2009 on board of R/V Universitatis-(CoNISMa), R/V Urania (CNR), and a small launch in shallow water areas (<−100 m). Data were acquired with multibeam systems working at different frequency (50, 100 and 455 kHz) in order to obtain the full resolution for each bathymetric range. Data were DGPS-positioned for deep water surveys, whereas Real-Time Kinematic positioning was supplied only for shallow water survey. Daily acquisition of sound velocity profiles throughout the water column at 0.1 m depth intervals and patch test surveys for multibeam calibration were realized. Moreover, real-time sound velocity close to the transducer was used as well as tide corrections provided by the nearby Messina tide-gauge station (www.mareografico.it). Raw data were processed using Caris Hips and Sips 6.1 software, encompassing data re-calibration and depth control, application of correct tide, statistical filters and manual editing of each single swath to remove organized/non-organized noise. Data were merged and gridded to obtain Digital Terrain Models (DTMs) with cell size variable from 1 m in shelf sectors (<−100 m) to 10 m in deeper water settings.
The Massachusetts Institute of Technology general circulation model (MITgcm) has been used for this work (See Supplementary Information) in order to test the presence of a refracting solitary wave on the studied region. The model domain covers the Messina Strait from 37°54′ N to 38° 24′ N by means of a non-uniform curvilinear orthogonal grid composed of 300 × 840 points. The spatial resolution of the model grid ranges between 15 and 150 m, with the minimum values reached in the narrowest part of the strait. To adequately resolve the pycnocline, the model uses 55 vertical levels with a thickness of 7.5 m in the upper 300 m, gradually increasing in the remaining 15 levels up to 100 m. The maximum depth reached in the model is 1320 m. Model bathymetry was obtained from a bilinear interpolation of the very-high-resolution multibeam bathymetric data (See Supplementary Information).
Detailed and long (from November 1980 to April 1982) time series of bottom currents in the area of interest have been obtained during a survey conducted by OGS committed by SNAM S.p.A.
Additional Information
How to cite this article: Droghei, R. et al. The role of Internal Solitary Waves on deep-water sedimentary processes: the case of up-slope migrating sediment waves off the Messina Strait. Sci. Rep. 6, 36376; doi: 10.1038/srep36376 (2016).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
Defant, A. Scylla und Charybdis und die Gezeitenströmungen in der Strasse von Messina. Annalen der Hydrographie und Maritimen Meteorologie. 5, 145–157 (1940).
Santoro, V. C., Amore, E., Cavallaro, L., Cozzo, G. & Foti, E. Sand waves in the Messina strait, Italy. J. Coastal Res. 36, 640–653 (2002).
Selli, R. Marine Geological Investigation on the Messina Strait and Its Approaches. G. Geol. ser. 2; 42, fasc. 2 (1978).
Colantoni, P. Marine geology of the Strait of Messina. Le Détroit de Messine (Italie) Évolution Tectono-Sédimentaire Récente (Pliocène et Quaternaire et Environmnt Actuel), 191–210 (1987).
Santoro, V. C., Amore, E., Cavallaro, L. & De Lauro, M. Evolution of sand waves in the Messina Strait, Italy. Ocean Dynamics. 54(3–4), 392–398 (2004).
Alpers, W. & Salusti, E. Scylla and Charybdis observed from space. J. Geophys. Res. Oceans 88(C3), 1800–1808 (1983).
Artale, V., Levi, D., Marullo, S. & Santoleri, R. Analysis of nonlinear internal waves observed by Landsat thematic mapper. J. Geophys. Res. Oceans 95(C9), 16065–16073 (1990).
Brandt, P. et al. Evidence for the influence of Atlantic-Ionian stream fluctuations on the tidally induced internal dynamics in the Strait of Messina. J. Phys. Oceanogr. 29(5), 1071–1080 (1999).
Haren, H., Ribó, M. & Puig, P. (Sub‐) inertial wave boundary turbulence in the Gulf of Valencia. J. Geophys. Res. Oceans 118(4), 2067–2073 (2013).
Ribó, M. et al. Morphobathymetric analysis of the large fine-grained sediment waves over the Gulf of Valencia continental slope (NW Mediterranean). Geomorphology 253, 22–37 (2016).
Karl, H. A., Cacchione, D. A. & Carlson, P. R. Internal-wave currents as a mechanism to account for large sand waves in Navarinsky Canyon head, Bering Sea. J. Sed. Res. 56, 706–714 (1986).
Huntley, D. A. et al. Hydrodynamics and sediment dynamics of North Sea sand waves and sand banks [and discussion]. Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences 343, 461–474 (1993).
Blondeaux, P. Mechanics of coastal forms. Annu. Rev. Fluid Mech. 33, 339–370 (2001).
Belde, J., Back, S. & Reuning, L. Three‐dimensional seismic analysis of sediment waves and related geomorphological features on a carbonate shelf exposed to large amplitude internal waves, Browse Basin region, Australia. Sedimentology. 62, 87–109 (2015).
Allen, J. R. L. Sand waves: a model of origin and internal structure. Sedimentary Geology 26, no. 4: 281–328 (1980).
Wynn, R. B. & Stow, D. A. Classification and characterisation of deep-water sediment waves. Marine Geology. 192(1), 7–22 (2002).
Reeder, D. B., Ma, B. B. & Yang, Y. J. Very large subaqueous sand dunes on the upper continental slope in the South China Sea generated by episodic, shoaling deep-water internal solitary waves, Mar. Geol. 279, 12–18 (2011).
Marullo, S. & Santoleri, R. Fronts and internal currents at the northern mouth of the Strait of Messina. Il Nuovo Cimento C 9, no. 3: 701–713 (1986).
Martorelli, E., Falcini, F., Salusti, E. & Chiocci, F. L. Analysis and modeling of contourite drifts and contour currents off promontories in the Italian Seas (Mediterranean Sea), Marine Geology 278(1), 19–30 (2010).
Michelato, A. & Mosetti, R. Studio delle correnti di fondo della zona a nord dello Stretto di Messina”. Progetto NOMEC (costumer: SNAM S.p.A.) (1982).
Constantin, A. & Escher, J. Particle trajectories in solitary water waves. Bull. Amer. Math. Soc. 44(3), 423–431 (2007).
Borluk, H. & Kalisch, H. Particle dynamics in the KdV approximation. Wave Motion 49(8), 691–709 (2012).
Osborne, A. R. & Burch, T. L. Internal solitons in the Andaman Sea. Science 208(4443), 451–460 (1980).
Grimshaw, R., Pelinovsky, E., Talipova, T. & Kurkin, A. Simulation of the transformation of internal solitary waves on oceanic shelves, J. Phys. Oceanogr. 34(12), 2774–2791 (2004).
Grimshaw, R., Pelinovsky, E. & Talipova, T. Modelling internal solitary waves in the coastal ocean. Surveys in Geophysics 28(4), 273–298 (2007).
Talipova, T. G., Kurkina, O. E. & Rouvinskaya, E. a. & Pelinovsky, E. N. Propagation of solitary internal waves in two-layer ocean of variable depth. Izv. Atmos. Ocean. Phys. 51, 89–97 (2015).
Grimshaw, R. Nonlinear Wave Equations for Oceanic Internal Solitary Waves. Stud. Appl. Math. 136(2), 214–237 (2016).
Pelinovsky, E. N., Polukhinan, O., Slyunaev A. & Talipova T. Internal solitary waves. In: Grimshaw R. (ed) Solitary waves in fluids, WIT Press, Southampton, pp 85–110 (2007).
Small, J. A nonlinear model of the shoaling and refraction of interfacial solitary waves in the ocean. Part II: Oblique refraction across a continental slope and propagation over a seamount. J. Phys. Oceanogr. 31(11), 3184–3199 (2001).
Munk, W. H. & Traylor, M. A. Refraction of ocean waves: a process linking underwater topography to beach erosion. J. Geol. 1–26 (1947).
Garrett, C. & Kunze, E. Internal tide generation in the deep ocean. Annu. Rev. Fluid Mech. 39, 57–87 (2007).
Salusti, F., Lascaratos, A. & Nittis, K. Changes of polarity in marine internal waves: Field evidence in eastern Mediterranean Sea. Ocean Modelling 82, 10–11 (1989).
Artale, V. & Levi, D. Nonlinear surface and internal waves in stratified shear flow. Geophys. & Astrophys. Fluid Dyn. 54(1–2), 35–48 (1990).
Zhao, Z., Klemas, V. V., Zheng, Q. & Yan, X. H. Satellite observation of internal solitary waves converting polarity. Geophys. Res. Lett. 30(19), (2003).
Zhao, Z., Klemas, V., Zheng, Q., Li, X. & Yan, X. H. Estimating parameters of a two-layer stratified ocean from polarity conversion of internal solitary waves observed in satellite SAR images. Remote Sensing of Environment 92(2), 276–287 (2004).
Bagnold, R. A. The Physics of Blown Sand and Desert Dunes (Methuen, 1941).
Wong, M. & Parker, G. Reanalysis and correction of bed-load relation of Meyer-Peter and Müller using their own database. J. Hydraul. Eng. 132, 1159–1168 (2006).
Cacchione, D. A., Pratson, L. F. & Ogston, A. S. The shaping of continental slopes by internal tides. Science 296(5568), 724–727 (2002).
Hernández-Molina, F. J. et al. Oceanographic processes and morphosedimentary products along the Iberian margins: A new multidisciplinary approach. Mar. Geol. 378, 127–156 (2016).
Bogucki, D., Dickey, T. & Redekopp, L. G. Sediment resuspension and mixing by resonantly generated internal solitary waves. Journal of Physical Oceanography 27(7), 1181–1196 (1997).
McCave, I. N. Sand waves in the North Sea off the coast of Holland. Mar. Geol. 10(3), 199–225 (1971).
Acknowledgements
This work was supported by the Flagship Project RITMARE (SP4-WP2). We thank E. Salusti, P.M. Santini, and F. Calogero for their advice and contribution during the early stage of our investigation. We also thank S. Marullo and V. Artale for their help and feedbacks; G. Grieco from ASI for his help with the COSMO-SkyMed SAR image; and D.J. Jerolmack for his critical review of the manuscript. Any use of trade, product or firm names is for descriptive purposes alone and does not imply endorsement by the US Government.
Author information
Authors and Affiliations
Contributions
F.F. developed the main hypothesis regarding the role of Internal Solitary Waves, coordinated the overall study, and led the writing of the main text. R.D. contributed to the analytic solutions regarding wave refraction and bottom velocity field for sediment resuspension, also analyzing numerical data. F.L.C. and R.S. contributed to the overall study, supervised the research, and participated in data interpretation. D.C. and E.M. contributed to the overall study approach and participated in geological data collection and interpretation. G.S. implemented the numerical model and performed the numerical simulation. R.M. contributed to the overall study approach and provided the in situ current meter data. All authors contributed to the writing of this manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Droghei, R., Falcini, F., Casalbore, D. et al. The role of Internal Solitary Waves on deep-water sedimentary processes: the case of up-slope migrating sediment waves off the Messina Strait. Sci Rep 6, 36376 (2016). https://doi.org/10.1038/srep36376
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep36376
This article is cited by
-
Sediment resuspension due to internal solitary waves of elevation in the Messina Strait (Mediterranean Sea)
Scientific Reports (2023)
-
Observing and modeling long-term persistence of P. noctiluca in coupled complementary marine systems (Southern Tyrrhenian Sea and Messina Strait)
Scientific Reports (2022)
-
Origin of deep-water sediment wave fields in the Northern Continental Slope, South China Sea
Arabian Journal of Geosciences (2021)
-
Deep-sea Sediment Resuspension by Internal Solitary Waves in the Northern South China Sea
Scientific Reports (2019)
-
Seafloor morphology in the Mozambique Channel: evidence for long-term persistent bottom-current flow and deep-reaching eddy activity
Marine Geophysical Research (2017)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.