Abstract
A data driven methodology is developed for tracking the collective influence of the multiple attributes of alloying elements on both thermodynamic and mechanical properties of metal alloys. Cobalt-based superalloys are used as a template to demonstrate the approach. By mapping the high dimensional nature of the systematics of elemental data embedded in the periodic table into the form of a network graph, one can guide targeted first principles calculations that identify the influence of specific elements on phase stability, crystal structure and elastic properties. This provides a fundamentally new means to rapidly identify new stable alloy chemistries with enhanced high temperature properties. The resulting visualization scheme exhibits the grouping and proximity of elements based on their impact on the properties of intermetallic alloys. Unlike the periodic table however, the distance between neighboring elements uncovers relationships in a complex high dimensional information space that would not have been easily seen otherwise. The predictions of the methodology are found to be consistent with reported experimental and theoretical studies. The informatics based methodology presented in this study can be generalized to a framework for data analysis and knowledge discovery that can be applied to many material systems and recreated for different design objectives.
Similar content being viewed by others
Introduction
The search for elemental substitutions and/or additions needed to refine metal alloy compositions and enhance their properties is a classical problem in metallurgical alloy design. Finding appropriate alloy chemistries based on a systematic exploration using either computational and/or experimental approaches is often guided by prior heuristic knowledge that harnesses expected trends captured in the periodic table that can influence phase stability and properties. Despite decades of work we have, as of yet, no unified mathematical formalism for harnessing this heuristic knowledge and thus more rapidly target our next potential discovery of an alloy. Our work identifies possible compositions for intermetallic formation. We employ manifold learning methods as a screening procedure for where detailed first principles calculations need to be focused, rather than run thousands of calculations of numerous permutations of compositions and then apply machine learning algorithms to search for potential minimum energy structures. In this paper we lay out this methodology for addressing the Grand Challenge of accelerating alloy design.
The recent discovery by Sato et al.1 of the existence of a Co3(Al,W) L12 intermetallic has spawned a renewed interest in cobalt based superalloys for high temperature applications after many decades of relative dormancy2. It serves as a good example of how challenging multicomponent alloy design can be. Sato et al. found that with the addition of W, Co3(Al,W) is indeed a stable intermetallic possessing all the characteristics needed (e.g. high melting point, L12 ordered structure, appropriate lattice parameter to achieve coherency strains) to enhance high temperature mechanical properties of cobalt alloys typical to nickel based superalloys. The determination that W was the key element required a patient and detailed experimental search. It was not obvious from simple inspection of known data or from the examination of property trends of elements from the periodic table, despite the decades of theoretical and empirical research in the field of alloy optimization and design. The exciting findings of Sato et al. serves to highlight the broader challenge in alloy design, namely how to identify the correct combination of alloying elements on intermetallic chemistry that governs both phase stability and such critical factors as mechanical and physical properties. No existing theoretical framework is able to simultaneously capture all of these multidimensional metrics of thermodynamics, crystal structure and microstructure.
The approach described here is designed to meet this Grand Challenge. In particular, we build on our extensive prior work applying statistical learning methods to critically assess and rank the influence of numerous and diverse parameters ranging from crystal chemistry to electronic structure descriptors on their potential influence on the multi-objective property targets of thermodynamic stability and physical and mechanical properties of intermetallics. We identify here potential alloying additions and thus target the chemistries for which thermodynamic calculations need to be done while significantly shrinking the chemical search space. One of the major benefits of our work is that the directed graph representation employed here readily scales with both binary and multicomponent pseudo-binary phase diagrams and most importantly, identifies chemical phase spaces that have a likelihood of having intermetallics that meet the requirements for enhanced high temperature mechanical properties.
Data Description and Methods
The selection of data (or “descriptors”) was organized into three broad classes of information: discrete scalar parameters that relate to solid state properties of single elements, thermodynamic and physical properties of potential alloy chemistries using Miedema’s3,4 model coupled to alloy design rules from the classical theories on phase stability of Villars5, Mooser-Pearson6,7, Pettifor8 and Hume-Rothery9 and finally verification with a dimensionless descriptor database that captures the electronic structure via eigenvalue decomposition of spectral features from density of states curves of a small training set of both individual elements and of a few binary intermetallic alloys. For example, Fig. 1 illustrates a heat map of pairwise correlations of the influence of alloying elements (X) in Co3(Al,X) and the properties represented by dendrograms which categorize the input data into the different genres playing a significant role in alloying characteristics.
The interpretation of this heat map can best be understood if one recognizes that each alloying element ‘i’ forming a row of the database is associated with a set of properties. Each of these properties or descriptors, forming a column of the heat map, can be represented by an axis of a high dimensional Euclidean space Rn, where ‘n’ is the total number of descriptors. Correspondingly each element ‘i’ can be represented by a data point xi mapped out in this high dimensional descriptor space Rn where the coordinates of xi are given by the magnitudes of the various descriptors in relation to element ‘i’. The challenge is that one heat map of one class of descriptors alone does not capture the curvature of the hyper plane on which the data sits and the similarity metrics need to be captured by geodesic distances. Hence there is the need to apply non-linear manifold projection methods.
Using these criteria as the basis for mapping similarity among the alloying elements, we screened for trajectories of interest, such as high cohesive energy, by interrogating a dissimilarity graph generated through manifold learning methods. In our prior work we have explored numerous methods to explore ways to ascertain how to statistically assess the interaction of such multivariate data, including dimensionality reduction mapping10,11,12,13,14, information entropy-based recursive partitioning15,16 and evolutionary methods17,18. In the present work we build on this foundation by applying non-linear manifold learning methods. Specifically, we use the Isomap algorithm19 that goes beyond the assumption that a low dimensional manifold exists and generates a low dimensional embedding of data points that preserves the best possible geodesic distance between all pairs of data points. The collection of various elemental and Co alloying descriptors form the axes of a high dimensional Euclidean space Rn which are mapped out in this high dimensional space as a finite set of data points {xi} ϵ Rn. The relevant descriptors represent various physical properties, crystal structure and chemistry. Given only the data points {xi} and the corresponding descriptors as the input, Isomap20,21 attempts to recover a smooth nonlinear submanifold Md of lower dimension d < n, upon which the points xi ϵ Rn lie and then unfolds Md to visually capture relationships between the datapoints, while preserving the geodesic metric distances between them along the submanifold. The algorithm applies non-linear dimensionality reduction to map the set of points {xi} ϵ Rn to {yi} ϵ Md specified by xi → yi | yi ϵ Md, d<n, s.t. where is a norm, representative of the pairwise geodesic distances between any two elements and in Rn along the submanifold Md. This is performed by first constructing a weighted graph in Rn that connects the data points {xi} utilizing some form of nearest neighbor connectivity. The crucial stage of the Isomap algorithm is to construct the appropriate graph so that the pairwise geodesic distance between the elements along the graph, , is an accurate approximation of . The output of Isomap algorithm is then the points {yi} plotted out on the dimensionally reduced weighted graph.
The geodesic distance is defined as the shortest distance between a pair of points along a manifold and in this case, the nonlinear manifold in the high dimensional space is obtained by connecting each element to its ‘k’ nearest neighbors in terms of their collective impact within the high dimensional data space associated with thermodynamic, structural and mechanical alloying properties. The algorithm aims to produce low dimensional projections of data that geometrically map the true correlations between elements in the original manifold and the resultant projection of data is shown to uncover the relative impact of elements in their role as alloying additions to Co3(Al,X) both in terms of phase stability and mechanical properties in a fundamentally novel manner that is not apparent from an examination of the traditional periodic table alone.
Results and Discussion
The Isomap algorithm was used to discover the optimal low dimensional graph embedding of elements in their role as alloying additions to Co3(Al,X), such that the geodesic distance between the elements in the higher dimensional manifold is preserved when it is mapped onto the lower dimensional graph (details of the algorithmic implementation are described in the supplementary section). Each alloying element (X), for the alloy Co3(Al,X) becomes a graph vertex and each vertex is connected to its neighboring vertices through edges whose weights are proportional to the distance between the vertices (Fig. 2). This permits one to readily identify pathways of similarity (or dissimilarity) between elements that may serve to stabilize the L12 structure for a Co3(Al,X) stoichiometry, which leads to identifying intermetallic chemistries that have a high cohesive energy, high melting point and a lattice parameter that will ensure coherency strains in a Co rich fcc matrix.
The uncertainty of the connections identified can be assessed by changing the number of nearest neighbor connections, as well as the number of dimensions included in the analysis. The change of connections and neighboring lengths is correlated to the uncertainty in the results. The optimal number of dimensions in which to represent the graph output of Isomap can be determined by a Scree plot which is an ordered representation of the impact of each additional dimension, in the low dimensional representation, in accurately representing the geodesic distance along the original manifold (see supplementary material). Since the manifold in high dimensional space can vary depending on the number of nearest neighbors chosen, a measure of statistical uncertainty in the geodesic distances can be obtained by varying the number of nearest neighbors to check for short-circuit errors22 as well as by ensuring the optimum number of dimensions for low dimensional representation. We find that the first two dimensions are sufficient to represent 90% of the original geodesic distances in all cases of nearest neighbors while the embeddings themselves show that the overall structure of the manifold does not change by varying the number of neighbors other than to increase the number of pathways. For the case of k = 2, the manifold becomes disconnected. Therefore, in this case we choose k = 3 to ensure that the resulting graph embedding is neither over-connected, leading to loss of pairwise geodesic distances, nor are critical neighbors disconnected23. Further, the comparison of connections under the different input parameters do not change significantly, demonstrating that the results presented here have low levels of uncertainty for every node.
Figure 2 is a network graph that shows the relative similarity/dissimilarity between elements (nodes) as potential alloying elements (X) in terms of their collective impact on the properties of Co3(Al,X). It should be noted that this diagram is also applicable to higher order multicomponent systems by suggesting additional elements (Y) for Co3(Al,X,Y) by considering both first and second nearest neighbors at each node. The key feature which we utilize in this graph is the relative distances of the connecting edges. The length of the edge represents the dissimilarity between the vertices it connects and the elements closest to each other are most similar in terms of the descriptors that go into the construction of this graph. The edges of the graph connect elements that have the strongest similarity with respect to each other. Each node identifies a ternary alloy composition of the type Co3(Al,X). The edges connecting two nodes Co3(Al,X) and Co3(Al,Y) for instance would be associated with a range of compositions and phases that are mapped onto a quaternary phase diagram of Co, Al, X and Y, where X and Y are the chemical additions. Hence another unique feature is that it identifies new multicomponent systems that may in fact have stable intermetallics with the desired properties we seek. This provides the framework for targeted phase diagram computations.
As a first step, with the objective of defining a substitute X for Co3(Al,X), the graph network identifies the first nearest neighbors of Al (Ga, Mn and Ti) that are most similar to Al and the dissimilarity strengthens as we move to second, third and further nearest neighbors. In this case, we know that Co3Al as a L12 structure is not stable, hence if we want to find other alloying elements to add, we need to probe the neighborhood of Al. The following rules are used to navigate the graph network. Since Al has multiple edges connecting to neighbors, in order to identify which direction we move in, we select the element that has a higher level of stability (from Miedema’s model) and therefore Ti serves as the first step. At the Ti node, we again identify the possible branches but also add on other levels of constraint such as modulus and cohesive energy in making the decisions for the next step (Fig. 3). Using this logic repeatedly at each node, we finally reach W, as was empirically discovered by Sato1. If we define our criteria as optimizing cohesive energy, we obtain an alternate pathway to W as illustrated in Fig. 4 Each intermediate node along the pathway has been suggested as a potential alloying element for Co3(Al,X)24 to increase the solvus temperature. If we define our criteria as optimizing cohesive energy, we obtain a diverging pathway leading to Ta as illustrated in Fig. 4. It is important to note that the termination of the pathway does not necessarily lead to an element representing the global maximum (or minimum) of a desired property within the graph. An element that may present the global maximum may potentially be unsuitable for alloying. The issue is not solely moving far away from the element we desire to substitute, in this case Al, as the farther we move the more difficult it is to find a similar element in terms of overall alloying properties. The aim is to track all potential elements that might provide enhanced high temperature properties while remaining as similar to Al as possible in order to provide the L12 phase.
Thus the graph provides a unique map for which direction to move in chemical space for a specific design problem, something that a cursory inspection of the periodic table will not provide as the geometrical proximity of elements in the projection of data as visualized in the periodic table captures only the systematics of electronic structure data associated with single elements, not their collective influence on structure and properties of targeted alloy structures.
It should be added that another unique aspect of our methodology is that the network graph helps to target our thermodynamic and electronic structure computations on specific chemistries. In this approach, we are using informatics to guide and learn from the data where physical computations are needed to make decisions without having to repeat a vast number of computations over large chemical spaces. While the network graph can be interrogated to obtain pathways that may be avoided (e.g. the pathway of decreasing cohesive energy shows Mn, which is known not to strengthen the L12 phase25), the purpose of this network is to identify chemical additions which are most likely to improve stability and high temperature properties for Co3Al. The objective is not to define which additives will not work. Therefore, we are reporting only those compounds which are most likely to have the best properties, while not excluding the possibility of other stable Co compounds from existing. For instance, examples have been reported where addition of Ga26 or Ge27 increase the stability of γ‘ although they are not connected to the pathway. For screening elements of interest through electronic structure calculations, the values for enthalpy of formation and cohesive energy were calculated via density functional theory (DFT). To serve as a rapid screening process, we performed calculations of binary Co3X, imposing an L12 structure as a first approximation to Co3(Al,X) where additive concentration is small, in order to identify probable options just as a means of quickly assessing possible likelihoods for pathways. Following the cohesive energy pathway, we arrive at Ta, after which any additional steps lower the cohesive energy. While the nodes of the pathway are the substitutes with highest likelihood of success, the elements connected by the branches also represent potentially promising additions.
Additional information beyond confirming the stability of Co3(Al,W) is uncovered by identifying the pathways for different criteria, such as cohesive energy, melting temperature or other design requirements. Our work identifies possible compositions for intermetallic formation. The nodes of our graph identify potential alloying additions and thus target the chemistries for which thermodynamic calculations need to be done to confirm whether these compounds do indeed exist. Hence the manifold learning methods serve as a screening procedure for where detailed first principles calculations need to be focused, rather than run thousands of calculations of numerous permutations of compositions and then apply machine learning algorithms to search for potential minimum energy structures. Further, while we find W to be a suitable addition, we find additional nodes that look to be as promising, such as Ta and Re. However, a single design requirement is not sufficient for identifying additives, thereby requiring multiple design pathways. For example, we have shown different pathways leading to W or to Ta, depending on the design requirement. Therefore, this identifies that a combination of these additives leads to a good combination of cohesive energy (or the highly correlated melting temperature) and modulus. This demonstrates the application of the graph network for multi-functional design.
This analysis (1) confirmed Sato’s1 empirical studies on W addition to Co3Al; (2) identified different pathways for property improvement; and (3) determined chemical substitutes for Co-based superalloys. Our results are consistent with reported experimental and theoretical studies, as indicated in Table 1. The agreement of these prior studies with the graphical network result provides the foundation for application of this approach.
Shown in Fig. 4 are additional possible substitutes for quaternary systems (i.e. Co3(Al,X,Y)). For instance, Ta addition to quaternary Co3(Al,W,Y) has indeed been experimentally reported28. We identify the new quaternary systems by including the additives which are nearest neighbors. These are further the most suitable additions to Co3Al. This therefore guides the next series of experiments. In addition to the experiments suggested from our ternary pathways (for example, comparing the stability and melting temperature of Co3(Al,W) with Co3(Al,Ta)), the melting temperature and stability should be experimentally measured.
The likelihood of these compositions of intermetallics having long range order is based on the nature of similarity as characterized through manifold learning metrics. We have shown that independent studies via first principles methods that empirically explored numerous compositions do indeed match our results via informatics methods, lending support to our approach. The issue of exploring the potential role of site preference is one of the next steps in our work. However our study provides the target chemistries where such studies need to be focused.
Conclusions
This work has shown that the use of manifold learning methods can provide a powerful means of exploring the similarity and dissimilarity of the influence of alloying additions on the properties of alloys. We have demonstrated using the case study of Co3(Al,W) that one can reproduce many of the heuristically driven findings, as well as also providing a clear framework for identifying other elemental substitutions for targeted alloy properties for the next generation of cobalt based superalloys. Our work has a broader impact in that it lays the groundwork for using such informatics based methods, judiciously integrated with targeted computations, as a predictive approach for chemical design of multicomponent systems. This study has focused on exploring metrics that govern intermetallic stability and properties, but the computational framework is generic enough to integrate data from many different length scales and as such can accommodate the addition of data associated with microstructure, processing and environmental response of alloys. This will generate more complex networks and the judicious choice of appropriate algorithmic strategies will identify pathways for optimizing elemental selection to meet multiscale objectives and will be reported in a subsequent study.
Additional Information
How to cite this article: Srinivasan, S. et al. Mapping Chemical Selection Pathways for Designing Multicomponent Alloys: an informatics framework for materials design. Sci. Rep. 5, 17960; doi: 10.1038/srep17960 (2015).
References
Sato, J. et al. Cobalt-base high-temperature alloys. Science. 312, 90–91 (2006).
Suzuki, A., Inui. H. & Pollock, T. M. L12 strengthened cobalt-base superalloys. Annual Rev. Matl. Res. 45, 345–368 (2015).
Miedema, A. R., de Chatel, P. F. & de Boer, F. R. Cohesion in alloys – fundamentals of a semi-empirical model. Physica B+C, 100, 1–28 (1980).
Miedema, A. R., Niessen, A. K., de Boer, F. R., Boom, R. & Matten, W. C. M. Cohesion in Metals: Transition Metal Alloys (North-Holland, 1989).
Villars, P. Factors governing crystal structures in Intermetallic Compounds: Principles and Practice (eds Westbrook, J. H. & Fleischer, R. L. ) 227–275 (Wiley, 1995).
Pearson, W. Crystal Chemistry and Physics of Metals and Alloys (Wiley, 1972).
Mooser, E. & Pearson, W. B. On the crystal chemistry of normal valence compounds. Acta Crystallogr. 12, 1015–1022 (1959).
Seiser, B., Drautz, R. & Pettifor, D. G. TCP phase predictions in Ni-based superalloys: Structure maps revisitied. Acta Mat 59, 749–763 (2011).
Hume-Rothery, W. The Engel-Brewer theories of metals and alloys. Prog. Mater. Sci. 13, 229–265 (1968).
Balachandran, P. V. & Rajan, K. Structure maps for AI4AII6(BO4)6X2 apatite compounds via data mining. Acta Cryst. B68, 24–33 (2012).
Broderick, S. R. & Rajan, K. Eigenvalue decomposition of spectral features in density of states cureves. Europhys. Lett. 95, 57005 (2011).
Broderick, S. R., Aourag, H. & Rajan, K. Classification of oxide compounds through data mining density of states spectra. J. Am. Ceram. Soc. 94, 2974–2980 (2011).
Dey, P. et al. Informatics-aided bandgap engineering for solar materials. Comp. Mat. Sci. 83, 185–195 (2014).
Broderick, S., Ray, U., Srinivasan, S., Rajan, K. & Balasubramanian, G. An informatics based analysis of the impact of isotope substitution on phonon modes in graphene. Appl. Phys. Lett. 104, 243110 (2014).
Kong, C. S., Villars, P., Iwata, S. & Rajan, K. Mapping the ‘materials gene’ for binary intermetallic compounds- a visualization schema for crystallographic databases. Comp. Sci. Disc. 5, 015004 (2012).
Balachandran, P. V., Broderick, S. R. & Rajan, K. Identifying the “inorganic gene” for high temperature piezoelectric perovskites through statistical learning. Proc. Royal Soc. A. 467, 2271–2290 (2011).
Kong, C. S. et al. Information-theoretic approach for the discovery of design rules for crystal chemistry. J. Chem. Inf. Modl. 52, 1812–1820 (2012).
Ganguly, S., Kong, C. S., Broderick, S. R. & Rajan, K. Informatics based uncertainty quantification in the design of inorganic scintillators. Matl. Manuf. Proc. 28, 726–732 (2013).
Tenenbaum, J. B., de Silva, V. & Langford, J. C. A global geometric framework for nonlinear dimensionality reduction. Science. 290, 2319–2323 (2000).
Lee, J. & Verleysen, M. Nonlinear Dimensionality Reduction (Springer-Verlag, 2008).
Cukierski, W. J. & Foran, D. J. Using betweenness centrality to identify manifold shortcuts. Paper presented at IEEE International Conference on Data Mining Workshops ICDMW'08, Pisa, Italy. Washington, DC: IEEE Computer Society Conference Publishing. 10.1109/ICDMW.2008.39 (2008, December 15–19).
Balasubramanian, M. & Schwartz, E. L. The Isomap algorithm and topological stability. Science. 295, 7 (2002).
Wagaman, A. S. & Levina, E. Discovering sparse covariance structures with the Isomap. J. Comp. Graph. Stat. 18, 551–572 (2009).
Omori, T. et al. Partition behavior of alloying elements and phase transformation temperature in Co-Al-W-base quaternary systems. Intermetallics. 32, 274–283 (2013).
Chen, M. & Wang, C.-Y. First-principle investigation of 3d transition metal elements in ϒ’-Co3(Al,W). J. Appl. Phys. 107, 093705 (2010).
Chinen, H. et al. Phase equilibria and ternary intermetallic compound with L12 structure in Co-W-Ga system. J. Phase Equilibr. Diff. 30, 587–594 (2009).
Ishida, K. Recent progress in Co-base superalloy. Paper presented at 2014 TMS Annual Meeting and Exhibition, San Diego, USA. Warrendale, Pennsylvania: TMS Publications. (2014, February 16–20).
Suzuki, A. & Pollock, T. M. High-temperature strength and deformation of ϒ/ ϒ’ two phase Co-Al-W base alloys. Acta Mat. 56, 1288–1297 (2008).
Suzuki, A., DeNolf, G. C. & Pollock, T. M. Flow stress anomalies in ϒ/ ϒ’ two-phase Co-Al-W base alloys. Scripta Mat. 56, 385–388 (2007).
Titus, M. S., Suzuki, A. & Pollock, T. M. Creep and directional coarsening in single crystals of new ϒ/ ϒ’ cobalt base alloys. Scripta Mat. 66, 574–577 (2012).
Yan, H.-Y., Vorontsov, V. A. & Dye, D. Alloying effects in polycrystalline ϒ’ strengthened Co-Al-W base alloys. Intermetallics. 48, 44–53 (2014).
Makineni, S. K., Nithin, B. & Chattopadhyay, K. A new tungsten-free ϒ- ϒ’ Co-Al-Mo-Nb based superalloy. Scripta Mat. 98, 36–39 (2015).
Saal, J. E. & Wolverton, C. Thermodynamic stability of Co-Al-W L12 ϒ’. Acta Mat. 61, 2330–2338 (2013).
Acknowledgements
We acknowledge support from the Air Force Office of Scientific Research (AFOSR) Basic Research Initiative Program “Sustainable Alloy Design: Searching for Rare Earth Element Alternatives through Crystal Engineering” under grant number FA9550-12-1-0456. SBS and KR also acknowledge support from the National Science Foundation (NSF) under grant number DMR-1307811. KR also thanks support of AFRL through Dr. J. Tiley and the Erich Block Endowed Chair at the University at Buffalo- State University of New York.
Author information
Authors and Affiliations
Contributions
S.S. and S.R.B. performed the informatics calculations, R.Z. performed the DFT calculations and K.R. developed the framework for applying manifold learning methods to this study. A.M., S.B.S., S.K.S. and J.M.L. contributed in the writing and reviewing of the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Srinivasan, S., Broderick, S., Zhang, R. et al. Mapping Chemical Selection Pathways for Designing Multicomponent Alloys: an informatics framework for materials design. Sci Rep 5, 17960 (2015). https://doi.org/10.1038/srep17960
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep17960
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.