Abstract
Lithium-ion batteries (LIBs) are promising energy storage devices for portable electronics, electric vehicles and power-grid applications. It is highly desirable yet challenging to develop a simple and scalable method for constructions of sustainable materials for fast and safe LIBs. Herein, we exploit a novel and scalable route to synthesize ultrathin nanobelts of anatase TiO2, which is resource abundant and is eligible for safe anodes in LIBs. The achieved ultrathin nanobelts demonstrate outstanding performances for lithium storage because of the unique nanoarchitecture and appropriate composition. Unlike conventional alkali-hydrothermal approaches to hydrogen titanates, the present room temperature alkaline-free wet chemistry strategy guarantees the ultrathin thickness for the resultant titanate nanobelts. The anatase TiO2 ultrathin nanobelts were achieved simply by a subsequent calcination in air. The synthesis route is convenient for metal decoration and also for fabricating thin films of one/three dimensional arrays on various substrates at low temperatures, in absence of any seed layers.
Similar content being viewed by others
Introduction
The drastic depletion of traditional fossil energies and serious environmental pollutions stimulate tremendous research interests nowadays to develop sustainable energies and advanced energy-storage systems. Among various energy-storage systems, lithium-ion batteries (LIBs) are promising candidates for portable electronics, future electric vehicles/hybrid electric vehicles and power-grid applications because of its high energy density1,2,3. The state-of-the-art anode material for LIBs, graphite, cannot fulfill the demands for large scale energy storage applications due to its poor rate performance and serious safety issues. Moreover, abundance, toxicity, synthetic methods and scalability of anode material should be considered to reduce the energy and environmental costs of LIBs3. Significant efforts have been made on Ti-based compounds, for example Li4Ti5O12 and TiO2, as anodes for LIBs because of their superior safety as well as resource abundance and non-toxicity4,5,6. The inherent overcharge protection of Ti-based compounds arises from the fact that high Li-intercalation potential avoids the lithium dendrites and formation of the solid electrolyte inerphase (SEI) film as well. Also served as important functional material in photocatalysis7, energy conversion8 and gas sensors9, TiO2 possesses a theoretical capacity of 335 mAhg−1, which is much higher than that of Li4Ti5O12 (175 mAhg−1) having been successfully commercialized. Full cells constructed with TiO2 and LiFePO4 or LiNi0.5Mn1.5O4 were reported to exhibit fascinating performances10. Among common TiO2 polymorphs of anatase, rutile and brookite, anatase presents the most excellent properties in lithium storage11 and photocatalysis12. However, for lithium storage, anatase TiO2 still suffers from low capacity and poor rate performance because of the sluggish Li ion diffusion and poor electronic conductivity11.
Reducing the dimension to a nanometer-scale range is one of the most effective strategies for anatase to improve the battery performance13,14,15,16,17,18,19, because the characteristic time constant t for diffusion is proportional to the square of the diffusion length L (t ≈ L2D−1)20. Specifically, two-dimensional (2D) nanomaterials can provide greatly increased electrolyte/electrode contact area and effectively shorten diffusion distance of Li ions, which in turn enhances their electrochemical performances21,22,23. For example, anatase TiO2 nanosheets with exposed highly reactive (001) facets exhibited excellent properties for lithium storage24. Ultrathin 2D nanomaterials demonstrate many unique physical and chemical properties25. As a special nanostructure, nanobelts integrate the merits of 2D nanomaterials with enhanced charge transport that is characteristic of one-dimensional (1D) configuration.
Anatase TiO2 nanobelts are typically fabricated via calcinations of hydrogen titanate, which is prepared by an alkaline hydrothermal treatment followed by a subsequent proton exchange26,27,28,29. Utilizing titanate derived by such a multi-step procedure as intermediates, TiO2 with other 1D and 2D nanostructures could be obtained30,31,32,33,34,35,36. Recently, a vapour-phase hydrothermal method using ammonia instead of NaOH was developed for the direct growth of titanate nanotubes on a titanium substrate37. Mechanical agitation was also introduced into the alkaline hydrothermal technique to obtain elongated titanate nanotubes38. However, there are potential dangers in a high-pressure route, especially in large-scale productions and even unfortunately, the anatase TiO2 nanobelts by alkaline hydrothermal reactions usually exhibit a large thickness and low surface area26,27, which is not favored for the lithium storage. Certain low temperature techniques have been developed to synthesize titanate, including those with a nanosheet structure39; unfortunately, the sheet is still not thin enough and the specific surface area is also not high. It is still challenging to obtain TiO2 with high performance for lithium storage via a simple and scalable synthesis method.
Herein, we present the synthesis of hydrogen titanate ultrathin nanobelts via a novel and robust H2O2-asisisted wet-chemistry route at ambient conditions, as illustrated schematically in Fig. 1. An amorphous black Ti-based precursor was prepared via a rapid pyrolysis process, which, unlike common Ti-based precursor, is quite water-proof and hence easy to handle. Simply immersing the precursor in aqueous H2O2 under the ambient conditions resulted in the formation of hydrogen titanate ultrathin nanobelts. With the morphology remained stable, the hydrogen titanate can be easily converted to anatase TiO2 by a subsequent calcination at 400 oC in air. The resultant anatase nanobelts show excellent performances when utilized as anode for LIBs. The current strategy can be extended to prepare other ultrathin nanomaterials and gives hints to nanostructure design for electrode materials.
Results
The formation of the hydrogen titanate ultrathin nanobelts is based on a dissolution/precipitation mechanism between H2O2 and the Ti-based precursor. Hydrogen peroxide is inexpensive and environmentally benign, as the only degradation product of which is water. It is noted that many titanium precursors have been dissolved in aqueous H2O2 solution to produce certain peroxo complexes40,41; however, synthesis of nanobelts in the presence of H2O2 has not been reported yet42, let alone that of ultrathin nanobelts. Moreover, most titanium precursors, such as titanium alkoxides and titanium halides, are highly susceptible to water or even moisture. Once contacted with water, rapid hydrolysis occurs on the surface and TiO2 is precipitated in the form of spherical nanoparticles rather than that of 1D or 2D nanostructures. Thus, a key technical issue herein is to explore a Ti-based precursor which does not hydrolyze in water.
In current investigation, the black precursor achieved by the rapid pyrolysis is amorphous (Fig. 2a and Inset in Fig. 2b) and has a compact bulky morphology (Fig. 2b and Supplementary Fig. 1a), which remains almost unchanged after being immersed in water, either at ambient condition (Supplementary Fig. 1b) or at 160 oC in a hydrothermal condition (Supplementary Fig. 1c), demonstrating its excellent stability in water. This water-stable feature is very important for a convenient and safe usage and storage in practice. The precursor contains uniformly distributed Ti, O, N, C and S elements (Fig. 2c). The mass fraction of C, N and H measured by an element analysis (Flash EA 1112, ThermoFinnigan) is 25.2%, 15.4% and 2.8%, respectively. The precursor mainly contains Ti-O, O-H, C–C, C–N, N-H, O = C–O, Ti-S-O and SO42− species (Supplementary Fig. 2 and Supplementary Fig. 3). After the reaction with H2O2 at ambient conditions, the precursor was converted to hydrogen titanate ultrathin nanobelts. Hydrogen titanates tend to form 2D morphologies because of their inherent lamellar structure. The room temperature synthesis further guarantees an ultrathin thickness of the titanate. Contrast to low yield of dominant liquid exfoliation route for preparation of ultrathin layered materials25, the precursor completely converts to hydrogen titanate ultrathin nanobelts in the present synthesis strategy. When compared with hydrothermal/solvothermal reactions widely adopted for the synthesis of most titanate nanostructures, the present route is energy-efficient as it demands no heating or external mechanical activations. The pyrolysis procedure for the precursor preparation is simple and rapid. The main external thermal energy input is for dehydration, which is the most time-consuming procedure. The pyrolysis process that finally achieved the black precursor is completed within just 2 min.
The phase and lamellar structures of the titanate were characterized by X-ray diffraction (XRD). All the diffraction peaks of the as-prepared sample (Fig. 2d) can be indexed to orthorhombic hydrogen titanate (H2Ti2O5.H2O, JCPDS card 47–0124). The broadening of the reflection peaks indicates small grains in the as-prepared titanate. The strong Bragg peak at 2θ = 8.5o corresponds to the lamellar structure with an interlayer distance of ca. 1 nm. This interlayer distance is larger than that of hydrogen titanate (H2Ti2O5.H2O), which may be attributed to the intercalation of nitrogen species and ammonium ions (Supplementary Fig. 4)37.
The as-prepared titanate exhibits a 1D-like architecture with abundant pores, as shown in the scanning transmission electron microscopy (STEM, Fig. 2e) and transmission electron microscopy (TEM, Fig. 2f) images. A closer observation reveals the nanobelt with a sharp tip (Fig. 2g,h), which looks like a bamboo leaf as a whole (Fig. 2i). The tips are curved and the edges are rolled up (Fig. 2e–h) because of the surface tension, which is commonly observed in graphene43,44. This suggests the ultrathin and flexible characteristics for the present titanate nanobelts. Many single-layered hydrogen titanates with a thickness of ca. 1 nm can be observed in Fig. 2g,h, which is in accordance with the XRD result. Some stacking nanobelts are also observed (Supplementary Fig. 5). The thickness of most nanobelts is estimated to be 1– 2nm (Fig. 2g,h and Supplementary Fig. 5). The nanobelts sway, gather, shrink and thicken under electron beam irradiation during TEM observations, which can be attributed to its ultrathin and flexible features and the instability of hydrogen titanate under the electron beam. It is previously observed that hydrogen titanate decomposed easily to anatase under focused electron beam irradiation45. This can explain the inconsistency that the titanate is crystallized as revealed by XRD (Fig. 2d) but shows no crystals in TEM observations (Fig. 2g,h). The titanate nanobelts possess a high specific surface area of 193 cm3g−1 and large total pore volume of 0.949 cm3g−1 (Fig. 2j). It is worth mentioning that the ultrathin nanobelts can be obtained in a wide range of H2O2 amount (20–800 mL for one gram of precursor, Supplementary Fig. 6), which indicates a high reliability of the present synthesis strategy. The increased and then decreased Ti(IV) concentration in the solution (Supplementary Fig. 7) confirms a dissolution/precipitation mechanism for the formation of titanate nanobelts when immersing the black titanium-based precursor in aqueous H2O2 solution.
Phase-pure anatase TiO2, as verified by the XRD pattern (Fig. 3a) and Raman spectrum (Fig. 3b), can be obtained by a subsequent calcination of the as-prepared titanate in air, with the ultrathin nanobelts architecture well reserved (Fig. 3c–e). The transition temperature (400 oC) from titanate to anatase here is lower than that of titanate obtained by hydrothermal reactions followed by a subsequent proton-exchange procedure26,27,28,29,30. Gentili et al. argued that a lower Na/Ti ratio in titanates was in favor of its transition to anatase46. Thus, the relatively low transition temperature could be attributed to the sodium-free feature for the titanate achieved in the current investigation. The high-resolution TEM (HRTEM) image of a nanobelt (Fig. 3f) exhibits a recognizable lattice spacing of 0.35 nm, corresponding to the (101) atomic plane of anatase TiO2. The selected area electron diffraction (SAED) pattern (Inset in Fig. 3f) further confirms that the nanobelt is in anatase polycrystalline. The thickness of anatase nanobelts is typically below 5 nm (Fig. 3e), slightly larger than that of the as-synthesized titanate because of the phase transition and grain growth during the calcination in air. The specific surface area and total pore volume of the anatase TiO2 nanobelts is determined to be 119 m2g−1 and 0.666 cm3g−1 (Fig. 3g), respectively.
The electrochemical performance of the anatase TiO2 ultrathin nanobelts was evaluated in coin type lithium half-cells using Li foil as counter electrode and reference electrode at the room temperature. Based on the shape, the discharge curve of the TiO2 nanobelts (Fig. 4a) can be divided into three regions46: i) a voltage drop from the open circuit voltage to ca. 1.75 V, which is related to the formation of the solid–solution LixTiO2; ii) a voltage plateau at ca. 1.75 V, which indicates a phase equilibrium between the anorthorhombic Li0.5TiO2 phase and the Li-poor tetragonal LixTiO2 phase; iii) a sloped region from 1.75 V to 1.0 V, which is attributed to the Li-ion insertion process into the surface layer of nano-sized TiO2 under the external force of the electric field. The high operating potential enables the batteries to be charged at high rates with high safety. The reaction in a TiO2/Li half-cell is proposed to be,
Here, the maximum insertion coefficient x is determined to be only ~0.5 (corresponding to a capacity of 167.5 mAhg−1) in bulk TiO2 due to the strong repulsive force between Li ions when the insertion ratio is greater than 0.5 [Refs 24,47]. Both theoretical simulations and experimental results demonstrated that the theoretical capacity of titania-based electrodes can be dramatically improved when certain nanostructures were employed5,6,11. The nanobelts exhibit an enhanced specific capacity at 1 C (170 mAg−1) from 171 to 197 mAhg−1 when compared with Degussa P25, (a benchmark TiO2 nanoparticles) in the second cycle, as shown in Fig. 4a,b. Moreover, the nanobelts demonstrate an excellent cycling stability (Fig. 4b), which is much better than that of P25. The irreversible capacity in the 1st cycle is assigned to the non-reversible Li intercalation or the reaction between the electrolyte and the anatase surface13,14,15,16,17,18,19, which is common for most anode materials, especially for nanostructured materials. Fortunately, the irreversible capacity loss in the first cycle can be effectively and conveniently mitigated by a butyllithium (C2H5OLi) treatment, or nano-sized Li powder incorporation48,49. After 5 cycles, the columbic efficiency kept a stable value of over 99.5%, suggesting a highly reversible electrochemical reaction.
As shown in Fig. 4c, the anatase TiO2 ultrathin nanobelts deliver a discharge capacity of ca. 216, 204, 186, 164, 146, 126 and 116 mAhg−1 at a current rate of 0.5 C, 1 C, 2 C, 5 C, 10 C, 20 C and 30 C, respectively. When the current is returned to 0.5 C, the anatase TiO2 ultrathin nanobelts resumes its capacity of 204 mAhg−1 after 80 cycles at different current densities, suggesting its excellent rate performance and good cycling stability. On the contrary, the P25 only displays 151, 112, 90, 65, 46, 33 and 27 mAhg−1 at 0.5 C, 1 C, 2 C, 5 C, 10 C, 20 C and 30 C, respectively, which is much lower than that of the anatase TiO2 ultrathin nanobelts. It took only 2 min at 30 C to charge the nanobelts to 116 mAhg−1 while charging the P25 to 112 mAhg−1 took a much longer time of 1 h at 1 C (Fig. 4c). At 30 C, the nanobelts illustrate a 330% capacity improvement over the P25 (Fig. 4c). The electrochemical performance of anatase TiO2 ultrathin nanobelts is not only better than TiO2 nanobelts obtained by a common alkaline hydrothermal route50,51 but also better than most of high performance TiO2 anodes17,19,24,52,53,54,55,56,57,58. The high electrochemical activity and low-cost preparation make the TiO2 ultrathin nanobelts a promising anode material for high performance and safe LIBs.
Discussion
The excellent electrochemical performance is mainly ascribed to its unique nanostructure: a) the ultrathin thickness greatly shortens the diffusion distance of Li ions and the 1D-like structure possesses facile charge transport along the longitudinal dimension; b) the porous structure allows efficient ingress and infiltration of the electrolyte into the electrode, enabling a rapid ion transport and provides abundant electrolyte/electrode contact area for charge transfer; c) the porous and flexible nanostructure effectively accommodates the volume/strain changes during the charge-discharge process. After the rate performance test for 80 cycles, the original ultrathin nanobelt structures can be well-retained (Inset in Fig. 4c), demonstrating the structure stability during charge-discharge cycles. The special composition of the nanobelts may also contribute to the excellent electrochemical performance. The X-ray photoelectron spectrum (XPS) N 1s signal ranging from 398 to 402 eV (Supplementary Fig. 8a) on the surface of the TiO2 nanobelts can be attributed to major interstitial nitrogen (Ninter) and minor chemically adsorbed nitrogen (Nad) species59. The S 2p peak at 168.4 eV (Supplementary Fig. 8b) is assigned to sulfur species in SO42− formed on the TiO2 nanobelts surface59. The N and S are in-situ doped to TiO2 nanobelts from the N-/S-containing precursor, resulting in a pale yellow color and an enhanced visible light absorption of the TiO2 nanobelts (Supplementary Fig. 9). Recently, Jiao et al. reported that N and S co-doping could improve lithium storage capability of TiO259. The exact effect of surface species and crystal defects on lithium storage performance of the present TiO2 nanobelts requires further investigations. Nevertheless, the nanobelts indeed show obviously enhanced charge transfer when compared with that of P25. In the electrochemical impedance spectroscopy (EIS) spectra illustrated in Fig. 4d, the intercept on Zreal axis in the high frequency region represents the resistance of electrolyte60. The depressed semicircle in the high-medium frequency region is assigned to the charge transfer process. The straight line at a lower frequency region represents the typical Warburg behavior, which is associated with the diffusion of Li ions in the electrodes. The impedance spectra are fitted to the proposed equivalent circuit (Inset in Fig. 4d), in which the equivalent circuit, Re, Rct, Zw, CPEdl and Cint represent the electrolyte resistance, the charge-transfer resistance, the Warburg impedance, the double-layer capacitance and the intercalation capacitance, respectively61,62. The Re of nanobelts and P25 is determined to be ca. 2.8 Ω and 1.9 Ω, respectively. The Rct of nanobelts and P25 is determined to be ca. 10.5 Ω and 33.0 Ω, respectively. Although the electrolyte resistance of nanobelts is slightly larger than that of P25, the nanobelts show much smaller charge transfer resistance (Rct) than that of P25. The nanobelts have larger slopes and shorter lines in the low frequency region, implying a faster Li+ diffusion rates and smaller variation of diffusion paths63. Thus, the small charge-transfer resistance on the electrode/electrolyte interface and fast Li+ diffusion contribute to the excellent electrochemical performance of the ultrathin nanobelts62.
Interestingly, the synthesis strategy described here is capable of constructing titanate nanobelt arrays (Fig. 5a,b) and branched core-shell arrays (Fig. 5c–f, namely ultrathin nanobelts deposited on anatase TiO2 nanowire or nanobelt arrays) on various plane and complex substrates without the assistance of any seed layers. TiO2 arrays with various 1D/3D nanostructures have potential applications in regions of solar energy conversion, energy storage and wettability control64,65,66. It is noted that the growth of nanostructured hydrogen titanate arrays via alkaline hydrothermal route is always limited to metallic Ti substrates32, or other substrates with a Ti coating35. Moreover, composition decoration can be conveniently achieved by this method (Supplementary Figs. 9–14), which may exhibit enhanced properties in lithium storage67 and photoelectrochemical water splitting68,69.
In summary, hydrogen titanate ultrathin nanobelts were synthesized on a large scale at room temperature by a facile strategy based on a H2O2-asisted dissolution/precipitation process, with an appropriately designed water-proof Ti-based precursor. Anatase TiO2 can be obtained by a calcination of the as-synthesized titanate at a relatively low temperature of 400 oC in air, with the ultrathin nanobelts architecture well-reserved. The unique nanostructures and appropriate composition endowed the anatase TiO2 nanobelts excellent performances in lithium storage. The high electrochemical activity and low-cost preparation make the TiO2 ultrathin nanobelts a promising anode material for fast and safe LIBs. This synthesis route is also convenient for metal decoration, as well as constructions of 1D/3D TiO2 arrays on arbitrary substrates. The current strategy can be extended to prepare other ultrathin metal oxides, which may find wide applications in regions of catalysis, energy conversion and energy storage.
Methods
Synthesis
All regents were of analytical grade and used as received without further purifications. 1.75 g glycine (C2H5NO2), 1.25 g titanium oxysulfate-sulfuric acid hydrate (Aladdin) and 0.6 mL nitric acid (65 wt. %) were added in 10 mL deionized water in a 100 mL crucible, which was transferred to a preheated furnace maintained at 400 °C for ca. 15 min to obtain a black precursor after ultrasounded for 10 min and stirred for 1 h. 0.5 g black precursor was then added into 400 mL H2O2 (30 wt. %) and stored at room temperature for 72 h to obtain hydrogen titanates, which were converted to anatase TiO2 counterparts after calcination in air at 400 oC for 1 h with a heating rate of 1 oC min−1.
Characterizations
X-ray diffraction (XRD) measurements were conducted on a XRD-6000 diffractometer (SHIMADZU) with a Cu Kα radiation, operated at 40 kV, 40 mA (λ = 0.15406 nm). The powder morphology was observed using a field emission scanning electron microscopy (FE-SEM, Hitachi S-4800, Tokyo, Japan, with EDS capabilities), together with a transmission electron microscopy (TEM, FEI-F20, FEI, USA) working at 200 kV. The X-ray photoelectron spectra (XPS) characterization was carried out on an Escalab 250Xi system (Thermo Fisher Scientific). The binding energy (BE) was calibrated by using the containment carbon (C 1 s = 284.6 eV). The Raman spectra were taken on a LabRamHRUV (JDbin-yvon) Raman spectrometer, using the 514 nm line as the excitation source. The Brunauer-Emmett-Teller (BET) approach using adsorption data was utilized to determine the specific surface area. The sample was degassed at 150 °C for 14 h to remove physisorbed gases prior to the measurement. Titanium concentrations of the reaction solution sampled at various time intervals were measured by ICP-MS (XSENIES).
Lithium storage test
The working electrodes were prepared by a slurry coating procedure. The slurry consisted of 70 wt. % TiO2 powders, 20 wt. % acetylene black and 10 wt. % polyvinylidene fluoride (PVDF) dispersed in N-methyl pyrrolidinone (NMP) and was coated on a copper foil, which acted as a current collector. The film was dried at 90 °C for 20 h in vacuum. The cells were assembled in an argon-filled glove box using Li foil as a counter electrode and polypropylene (PP) film (Celgard 2300) as a separator. The electrolyte was 1 M LiPF6 in a 50:50 (w/w) mixture of ethylene carbonate (EC) and diethyl carbonate (DEC). The charge-discharge tests were conducted on a LAND 2001A system. The electrochemical impedance spectroscopy (EIS) measurements were performed on a CHI660D electrochemical workstation.
Additional Information
How to cite this article: Wen, W. et al. Anatase TiO2 ultrathin nanobelts derived from room-temperature-synthesized titanates for fast and safe lithium storage. Sci. Rep. 5, 11804; doi: 10.1038/srep11804 (2015).
References
Dunn, B., Kamath, H. & Tarascon, J. M. Electrical energy storage for the grid: A battery of choices. Science 334, 928–935 (2011).
Liu, N. et al. A pomegranate-inspired nanoscale design for large-volume-change lithium battery Anodes. Nat. Nanotechnol. 9, 187–192 (2014).
Larcher, D. & Tarascon, J. M. Towards greener and more sustainable batteries for electrical energy storage. Nat. Chem. 7, 19–29 (2015).
Feckl, J. M., Fominykh, K., Döblinger, M., Fattakhova-Rohlfing, D. & Bein, T. Nanoscale porous framework of lithium titanate for ultrafast lithium insertion. Angew. Chem. Int. Ed. 51, 7459–7463 (2012).
Chen, Z., Belharouak, I., Sun, Y. K. & Amine, K. Titanium-based anode materials for safe lithium-ion batteries. Adv. Funct. Mater. 23, 959–969 (2013).
Zhu, G. N., Wang, Y. G. & Xia, Y. Y. Ti-based compounds as anode materials for Li-ion batteries. Energy Environ. Sci. 5, 6652–6667 (2012).
Chen, X., Liu, L., Yu, P. Y. & Mao, S. S. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals. Science 331, 746–750 (2011).
Crossland, E. J. W. et al. Mesoporous TiO2 single crystals delivering enhanced mobility and optoelectronic device performance. Nature 495, 215–230 (2013).
Wang, Y. et al. Nanostructured sheets of Ti-O nanobelts for gas sensing and antibacterial applications. Adv. Funct. Mater. 18, 1131–1137 (2008).
Armstrong, G., Armstrong, A. R., Bruce, P. G., Reale, P. & Scrosati, B. TiO2(B) nanowires as an improved anode material for lithium-ion batteries containing LiFePO4 or LiNi0.5Mn1.5O4 cathodes and a polymer electrolyte. Adv. Mater. 18, 2597–2600 (2006).
Deng, D., Kim, M. G., Lee, J. Y. & Cho, J. Green energy storage materials: Nanostructured TiO2 and Sn-based anodes for lithium-ion batteries. Energy Environ. Sci. 2, 818–837 (2009).
Chen, X. & Mao, S. S. Titanium dioxide nanomaterials: Synthesis, properties, modifications and applications. Chem. Rev. 107, 2891–2959 (2007).
Ren, Y., Hardwick, L. J. & Bruce, P. G. Lithium intercalation into mesoporous anatase with an ordered 3D pore structure. Angew. Chem. Int. Ed. 49, 2570–2574 (2010).
Zhang, G., Wu, H. B., Song, T., Paik, U. & Lou, X. W. TiO2 hollow spheres composed of highly crystalline nanocrystals exhibit superior lithium storage properties. Angew. Chem. Int. Ed. 53, 12590–12593 (2014).
Shin, J. Y., Samuelis, D. & Maier, J. Sustained lithium-storage performance of hierarchical, nanoporous anatase TiO2 at high rates: Emphasis on interfacial storage phenomena. Adv. Funct. Mater. 21, 3464–3472 (2011).
Kim, S. W. et al. Fabrication and electrochemical characterization of TiO2 three-dimensional nanonetwork based on peptide assembly. ACS Nano 3, 1085–1090 (2009).
Ye, J. et al. Nanoporous anatase TiO2 mesocrystals: Additive-free synthesis, remarkable crystalline-phase stability and improved lithium insertion behavior. J. Am. Chem. Soc. 133, 933–940 (2011).
Saravanan, K., Ananthanarayanan, K. & Balaya, P. Mesoporous TiO2 with high packing density for superior lithium storage. Energy Environ. Sci. 3, 939–948 (2010).
Tartaj, P. & Amarilla, J. M. Multifunctional response of anatase nanostructures based on 25 nm mesocrystal-like porous assemblies. Adv. Mater. 23, 4904–4907 (2011).
Zhang, H., Yu, X. & Braun, P. V. Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes. Nat. Nanotechnol. 6, 277–281 (2011).
Liu, J., Chen, J. S., Wei, X., Lou, X. W. & Liu, X. W. Sandwich-like, stacked ultrathin titanate nanosheets for ultrafast lithium storage. Adv. Mater. 23, 998–1002 (2011).
Liu, S. et al. Nanosheet-constructed porous TiO2-B for advanced lithium ion batteries. Adv. Mater. 24, 3201–3204 (2012).
Kim, G. et al. TiO2 nanodisks designed for Li-ion batteries: A novel strategy for obtaining an ultrathin and high surface area anode material at the ice interface. Energy Environ. Sci. 6, 2932–2938 (2013).
Chen, J. S. et al. Constructing hierarchical spheres from large ultrathin anatase TiO2 nanosheets with nearly 100% exposed (001) facets for fast reversible lithium storage. J. Am. Chem. Soc. 132, 6124–6130 (2010).
Zhang, X. & Xie, Y. Recent advances in free-standing two-dimensional crystals with atomic thickness: Design, assembly and transfer strategies. Chem. Soc. Rev. 42, 8187–8199 (2013).
Wu, N. et al. Shape-enhanced photocatalytic activity of single-crystalline anatase TiO2 (101) nanobelts. J. Am. Chem. Soc. 132, 6679–6685 (2010).
Kiatkittipong, K., Scott, J. & Amal, R. Hydrothermally synthesized titanate nanostructures: Impact of heat treatment on particle characteristics and photocatalytic properties. ACS Appl. Mater. Interfaces 3, 3988–3996 (2011).
Wang, J. et al. Origin of photocatalytic activity of nitrogen-doped TiO2 nanobelts. J. Am. Chem. Soc. 131, 12290–12297 (2009).
Zhou, W. et al. Synthesis of few-layer MoS2 nanosheet-coated TiO2 nanobelt heterostructures for enhanced photocatalytic activities. Small 9, 140–147 (2013).
Yoshida, R., Suzuki, Y. & Yoshikawa, S. Syntheses of TiO2(B) nanowires and TiO2 anatase nanowires by hydrothermal and post-heat treatments. J. Solid State Chem. 178, 2179–2185 (2005).
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T. & Niihara, K. Titania nanotubes prepared by chemical processing. Adv. Mater. 11, 1307–1311 (1999).
Liao, J. Y. et al. Multifunctional TiO2-C/MnO2 core-double-shell nanowire arrays as high-performance 3D electrodes for lithium ion batteries. Nano Lett. 13, 5467–5473 (2013).
Li, W. et al. Hydrothermal etching assisted crystallization: A facile route to functional yolk-shell titanate microspheres with ultrathin nanosheets-assembled double shells. J. Am. Chem. Soc. 133, 15830–15833 (2011).
Zhang, Y. et al. Three-dimensional CdS-titanate composite nanomaterials for enhanced visible-light-driven hydrogen evolution. Small 9, 996–1002 (2013).
Miyauchi, M. & Tokudome, H. Super-hydrophilic and transparent thin films of TiO2 nanotube arrays by a hydrothermal reaction. J. Mater. Chem. 17, 2095–2100 (2007).
Bavykin, D. V., Friedrich, J. M. & Walsh, F. C. Protonated titanates and TiO2 nanostructured materials: Synthesis, properties and applications. Adv. Mater. 18, 2807–2824 (2006).
Liu, P. et al. A facile vapor-phase hydrothermal method for direct growth of titanate nanotubes on a titanium substrate via a distinctive nanosheet roll-up mechanism. J. Am. Chem. Soc. 133, 19032–19035 (2011).
Tang, Y. et al. Mechanical force-driven growth of elongated bending TiO2-based nanotubular materials for ultrafast rechargeable lithium ion batteries. Adv. Mater. 26, 6111–6118 (2014).
Sutradhar, N., Sinhamahapatra, A., Pahari, S. K., Bajaj, H. C. & Panda, A. B. Room temperature synthesis of protonated layered titanate sheets using peroxo titanium carbonate complex solution. Chem. Commun. 47, 7731–7733 (2011).
Wu, J. M. et al. Large-scale preparation of ordered titania nanorods with enhanced photocatalytic activity. Langmuir 21, 6995–7002 (2005).
Tengvall, P., Elwing, H. & Lundstrom, I. Titanium gel made from metallic titanium and hydrogen peroxide. J. Colloid Interf. Sci. 130, 405–413 (1989).
Piquemal, J. Y., Briot, E. & Brégeault, J. M. Preparation of materials in the presence of hydrogen peroxide: From discrete or “zero-dimensional” objects to bulk materials. Dalton Trans. 42, 29–45 (2013).
Meyer, J. C. et al. The structure of suspended graphene sheets. Nature 446, 60–63 (2007).
Ortolani, L. et al. Folded graphene membranes: Mapping curvature at the nanoscale. Nano Lett. 12, 5207–2512 (2012).
Yang, H. G. & Zeng, H. C. Synthetic architectures of TiO2/H2Ti5O11.H2O, ZnO/H2Ti5O11.H2O, ZnO/TiO2/H2Ti5O11.H2O and ZnO/TiO2 nanocomposites. J. Am. Chem. Soc. 127, 270–270 (2005).
Gentili, V. et al. Lithium insertion into anatase nanotubes. Chem. Mater. 24, 4468–4476 (2012).
Kavan, L., Rathouský, J., Grätzel, M., Shklover, V. & Zukal, A. Surfactant-templated TiO2 (anatase): Characteristic features of lithium insertion electrochemistry in organized nanostructures. J. Phys. Chem. B 104, 12012–12020 (2000).
Brutti, S., Gentili, V., Menard, H., Scrosati, B. & Bruce, P. G. TiO2-(B) nanotubes as anodes for lithium batteries: Origin and mitigation of irreversible capacity. Adv. Energy Mater. 2, 322–327 (2012).
Wang, X. L. et al. Amorphous hierarchical porous GeOx as high-capacity anodes for Li ion batteries with very long cycling life. J. Am. Chem. Soc. 133, 20692–20695 (2011).
Gao, P. et al. Epitaxial growth route to crystalline TiO2 nanobelts with optimizable electrochemical performance. ACS Appl. Mater. Interfaces 5, 368–373 (2013).
Han, W. Q. & Wang, X. L. Carbon-coated Magnéli-phase TinO2n-1 nanobelts as anodes for Li-ion batteries and hybrid electrochemical cells. Appl. Phys. Lett. 97, 243104 (2010).
Hong, Z., Wei, M., Lan, T., Jiang, L. & Cao, G. Additive-free synthesis of unique TiO2 mesocrystals with enhanced lithium-ion intercalation properties. Energy Environ. Sci. 5, 5408–5413 (2012).
Yang, S., Feng, X. & Müllen, K. Sandwich-like, graphene-based titania nanosheets with high surface area for fast lithium storage. Adv. Mater. 23, 3575–3579 (2011).
Li, W. et al. Sol-gel design strategy for ultradispersed TiO2 nanoparticles on graphene for high-performance lithium ion batteries. J. Am. Chem. Soc. 135, 18300–18303 (2013).
Qiu, B., Xing, M. & Zhang, J. Mesoporous TiO2 nanocrystals grown in situ on graphene aerogels for high photocatalysis and lithium-Ion Batteries. J. Am. Chem. Soc. 136, 5852–5855 (2014).
Han, H. et al. Nitridated TiO2 hollow nanofibers as an anode material for high power lithium ion batteries. Energy Environ. Sci. 4, 4532–4536 (2011).
Guo, Y. G., Hu, Y. S., Sigle, W. & Maier, J. Superior electrode performance of nanostructured mesoporous TiO2 (Anatase) through efficient hierarchical mixed conducting networks. Adv. Mater. 19, 2087–2091 (2007).
Xia, T., Zhang, W., Murowchick, J. B., Liu, G. & Chen, X. A facile method to improve the photocatalytic and lithium-ion rechargeable battery performance of TiO2 nanocrystals. Adv. Energy Mater. 3, 1516–1523 (2013).
Jiao, W. et al. High-rate lithium storage of anatase TiO2 crystals doped with both nitrogen and sulfur. Chem. Commun. 49, 3461–3463 (2013).
Xiao, Y., Zeng, L. & Cao, M. Hybridization and pore engineering for achieving high-performance lithium storage of carbide as anode material. Nano Energy 12, 152–160 (2015).
Kim, M. S. et al. Ultra-high Li storage capacity achieved by hollow carbon capsules with hierarchical nanoarchitecture. J. Mater. Chem. 21, 19362–19367 (2011).
Giannuzzi, R. et al. Ultrathin TiO2(B) nanorods with superior lithium-ion storage performances. ACS Appl. Mater. Interfaces 6, 1933–1943 (2014).
Wu, H., Xu, M., Wang, Y. & Zheng, G. Branched Co3O4/Fe2O3 nanowires as high capacity lithium-ion battery anodes. Nano Res. 6, 167–173 (2013).
Yang, X. et al. Hierarchically nanostructured rutile arrays: acid vapor oxidation growth and tunable morphologies. ACS Nano 3, 1212–1218 (2009).
Cho, I. S. et al. Branched TiO2 nanorods for photoelectrochemical hydrogen production. Nano Lett. 11, 4978–4984 (2011).
Wu, W. Q. et al. Maximizing omnidirectional light harvesting in metal oxide hyperbranched array architectures. Nat. Commun. 5, 3968 (2014).
Wang, Y., Smarsly, B. M. & Djerdj, I. Niobium doped TiO2 with mesoporosity and its application for lithium insertion. Chem. Mater. 22, 6624–6631 (2010).
Liu, B. et al. Large-scale synthesis of transition-metal-doped TiO2 nanowires with controllable overpotential. J. Am. Chem. Soc. 135, 9995–9998 (2013).
Cho, I. S. et al. Codoping titanium dioxide nanowires with tungsten and carbon for enhanced photoelectrochemical performance. Nat. Commun. 4, 1723 (2013).
Acknowledgements
This work is support by Zhejiang Provincial Natural Science Foundation of China under Grant No. LY13E020001. Dr Wen thanks a scholarship award for Excellent Doctoral Student granted by Ministry of Education, China for the financial support.
Author information
Authors and Affiliations
Contributions
W.W. and J.M.W. conceived the concept and experiments. W.W. carried out the materials synthesis and part of materials characterizations and part of electrochemical measurements. J.Q.B. participated in part of the materials synthesis. Y.Z.J., S.L.Y., M.H.C. and J.C. participated in part of the materials characterizations and electrochemical measurements. W.W. and J.M.W. co-wrote the paper. All authors discussed the results and commented on the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Wen, W., Wu, Jm., Jiang, Yz. et al. Anatase TiO2 ultrathin nanobelts derived from room-temperature-synthesized titanates for fast and safe lithium storage. Sci Rep 5, 11804 (2015). https://doi.org/10.1038/srep11804
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep11804
This article is cited by
-
Effect of Ag modification on TiO2 and melem/g-C3N4 composite on photocatalytic performances
Scientific Reports (2023)
-
Bio-fabrication of TiO2 Nanomaterials and Their Applications in Electronics Devices
Journal of Electronic Materials (2021)
-
Photocatalytic degradation evaluation of N-Fe codoped aligned TiO2 nanorods based on the effect of annealing temperature
Journal of Advanced Ceramics (2020)
-
Controlled growth of highly pure TiO2 nanorod arrays/nanoflower clusters via one-step hydrothermal route
Journal of Materials Science: Materials in Electronics (2018)
-
Low-temperature one-step solid-phase synthesis of carbon-encapsulated TiO2 nanocrystals as anode materials for lithium-ion batteries
Ionics (2017)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.