Abstract
Casimir interactions play an important role in the dynamics of nanoscale objects. Here, we investigate the noncontact transfer of angular momentum at the nanoscale through the analysis of the Casimir torque acting on a chain of rotating nanoparticles. We show that this interaction, which arises from the vacuum and thermal fluctuations of the electromagnetic field, enables an efficient transfer of angular momentum between the elements of the chain. Working within the framework of fluctuational electrodynamics, we derive analytical expressions for the Casimir torque acting on each nanoparticle in the chain, which we use to study the synchronization of chains with different geometries and to predict unexpected dynamics, including a “rattleback”-like behavior. Our results provide insights into the Casimir torque and how it can be exploited to achieve efficient noncontact transfer of angular momentum at the nanoscale, and therefore have important implications for the control and manipulation of nanomechanical devices.
Similar content being viewed by others
Introduction
It is well established that light carries angular momentum1. The simplest evidence of this phenomenon is the possibility of spinning nanostructures by illuminating them with circularly polarized light2,3. The angular momentum of light is also manifested in Casimir interactions4 that originate from the vacuum and thermal fluctuations of the electromagnetic field5,6. For instance, two parallel plates made of birefringent materials with in-plane optical anisotropy have been shown to experience a Casimir torque that rotates them to a configuration in which the two optical axes are aligned7,8,9,10,11. A similar phenomenon is predicted to occur for two nanostructured plates12, or for a nanorod placed above a birefringent plate13.
Vacuum and thermal fluctuations also produce friction on rotating nanostructures; for instance, it has been predicted that a nanoparticle rotating in vacuum experiences a Casimir torque that slows its angular velocity and eventually stops it14,15. A similar effect is also expected for a rotating pair of atoms16. The Casimir torque can be enhanced by placing the particle near a substrate17,18, which also leads to a lateral Casimir force19,20, or by using materials with magneto-optical response21. The origin of this torque can be found in the imbalance of the absorption and emission of left-handed and right-handed photons caused by the rotation of the particle. Although Casimir interactions produce friction and stiction that affect the dynamics of nanomechanical devices22, they also offer new opportunities for the noncontact transfer of momentum; for example, if a rotating nanostructure is placed near another structure, the Casimir torque that slows the first one down will necessarily accelerate the other one23,24,25,26,27,28,29,30,31.
In this paper, we investigate the noncontact transfer of angular momentum at the nanoscale by analyzing the Casimir torque acting on a chain of rotating nanoparticles, which contains an arbitrary number of elements. This system can be thought of as a Casimir analog to a chain of particles rotating in a viscous medium, whose motion is coupled through a drag force. We obtain analytical expressions describing the Casimir torque and exploit them to study the free rotational dynamics of chains with different geometries. We show that the synchronization of the angular velocities of the particles can happen in timescales as short as seconds for realistic structures. Furthermore, we predict exotic behaviors in chains with inhomogeneous particle sizes and separations, including “rattleback”-like dynamics32,33, in which the sense of rotation of a particle changes several times before synchronization, as well as configurations for which angular momentum is never transferred to a selected particle in the chain. We analyze, as well, the steady-state distribution of angular velocities in chains in which one or multiple particles are externally driven at a constant angular velocity. The results of this work show that the Casimir torque provides a mechanism for the efficient transfer of angular momentum between nanoscale objects without requiring them to be in contact.
Results
Theoretical model
The system under study is depicted in Fig. 1. It consists of a chain of N spherical nanoparticles with diameters Di separated by center-to-center distances dij. Each nanoparticle can rotate with an angular velocity Ωi around the axis of the chain, which we choose as the z-axis. We assume that the size of the particles is much smaller than the relevant wavelengths of the problem, which are determined by the temperature, the material properties, and the angular velocities of the particles, and consider geometries obeying \(d_{ij} \ge \frac{3}{2}{\mathrm{max}}(D_i,D_j)\). This allows us to model each particle as a point electric dipole with a frequency-dependent polarizability αi(ω). Within this approximation, the Casimir torque acting on particle i can be written as \(M_i = \langle {\mathbf{p}}_i \times {\mathbf{E}}_i\rangle \cdot \widehat {\mathbf{z}}\)34, where the brackets stand for the average over vacuum and thermal fluctuations, while pi and Ei are, respectively, the self-consistent dipole and field at particle i, which originate from: (i) the fluctuations of the dipole moment of each particle \({\mathbf{p}}_j^{{\mathrm{fl}}}\) and (ii) the fluctuations of the field \({\mathbf{E}}_j^{{\mathrm{fl}}}\). Then, solving pi and Ei in terms of \({\mathbf{p}}_j^{{\mathrm{fl}}}\) and \({\mathbf{E}}_j^{{\mathrm{fl}}}\) and taking the average over fluctuations using the fluctuation–dissipation theorem35,36,37, one can write the Casimir torque as \(M_i = M_i^ + - M_i^ -\), where \(M_i^ \pm\) is given by (see the “Methods” section for the detailed derivation)
Here, \(\omega _i^ \pm = \omega \pm {\mathrm{\Omega }}_i\) and ni(ω) = [exp(ℏω/kBTi)−1]−1 is the Bose–Einstein distribution at temperature Ti, with T0 being the temperature of the surrounding environment. Furthermore, \({\mathrm{\Gamma }}_i^{0 \pm } = \frac{{2\omega ^3}}{{3c^3}}{\mathrm{Re}}\left\{ {2A_{ii}^ \pm - 1} \right\}\chi _i^ \pm (\omega )\) corresponds to the contribution to the Casimir torque produced by the environment, while
is the contribution arising from the particle–particle interaction. Physically, the first of these contributions corresponds to the exchange of angular momentum between each particle and the environment, while the second one is associated with the exchange of angular momentum between the particles. In these expressions, \(A_{ij}^ \pm\) are the components of the N × N matrix \({\mathbf{A}}^ \pm = \left[ {{\cal{I}} - \alpha ^ \pm {\mathbf{G}}} \right]^{ - 1}\), where α± is a diagonal matrix whose components are the effective polarizabilities of the particles \(\alpha _{{\mathrm{eff}},i}^ \pm (\omega )\) as seen from the frame at rest, G is the dipole–dipole interaction matrix with components \(G_{ij} = (1 - \delta _{ij}){\mathrm{exp}}(ikd_{ij})[(kd_{ij})^2 + ikd_{ij} - 1]/d_{ij}^3\), and k = ω/c is the wave number. Furthermore, \(\chi _i^ \pm (\omega ) = {\mathrm{Im}}\left\{ {\alpha _{{\mathrm{eff}},i}^ \pm (\omega )} \right\} - \frac{2}{3}k^3\left| {\alpha _{{\mathrm{eff}},i}^ \pm (\omega )} \right|^2\) and \(S_{ij}^ \pm = {\sum}_{m = 1}^N {A_{mi}^ \pm } G_{mj}\) (see the “Methods” section). We want to remark that our results include radiative corrections, which are crucial to correctly describe the contributions to the torque produced by the environment38. It is also important to notice that the Casimir torque described here is a dissipative effect, and therefore it depends strongly on the temperature of the particles and the environment.
The calculation of the effective polarizability \(\alpha _{{\mathrm{eff}},i}^ \pm (\omega )\) is subtle. In the past, this quantity has been computed assuming that the intrinsic response of the system was independent of the rotation, which resulted in an effective polarizability \(\alpha _{{\mathrm{eff}},i}^ \pm (\omega ) = \alpha _i(\omega _i^ \mp )\) that only accounted for the Doppler-shift produced by the rotation14,15,17,19,28,39,40,41. However, recently21,42, it has been pointed out that the inclusion of the Coriolis and centrifugal effects gives rise to corrections that, for the case of spherical particles, cancel the effect of the Doppler-shift and introduce a dependence on Ω2. As a consequence of this, the effective polarizability of a rotating sphere becomes \(\alpha _{{\mathrm{eff}},i}^ \pm (\omega ) = \alpha _i(\omega ) + {\cal{O}}({\mathrm{\Omega }}^2)\), as shown in the Supplementary Note 1. Notice that the component of the polarizability along the rotation axis, which does not contribute to the Casimir torque, is not affected by the rotation.
Rotational dynamics
Under realistic conditions, Ωi is smaller than both the thermal frequency kBT/ℏ (≈6 THz at room temperature) and the frequencies of the optical modes of the nanoparticles (≈28 THz for SiC). This allows us to expand \(M_i^ \pm\) in powers of Ωi and retain the lowest nonvanishing order, which is the linear one. This linear approximation is accurate for angular velocities up to Ωi/2π~100 GHz, as shown in Supplementary Fig. 1. Importantly, within this limit, the corrections to the effective polarizability discussed above become irrelevant. Assuming all particles and the environment have the same finite temperature, we can write the following equation for their angular velocities:
where the matrix H has components \(H_{ij} = h_i^0\delta _{ij} + h_{ij}\) with
Here, \(I_i = \pi \rho D_i^5/60\) is the moment of inertia of the nanoparticles, and ρ their mass density. The expressions for \({\mathrm{\Gamma }}_i^0\) and Γij are obtained from the corresponding definitions above by setting all angular velocities to zero.
We can hence study the rotation dynamics of a chain by analyzing its natural decay rates and modes given, respectively, by the eigenvalues and eigenvectors of H. As an initial example, we analyze a chain with N = 5 SiC spheres, all of them with identical diameter D = 10 nm, that are uniformly distributed with a center-to-center distance d = 1.5D. Throughout this work, unless stated otherwise, we assume that all of the particles remain at the same temperature as the environment, and set that temperature to 300 K. This assumption is a good approximation for the systems under consideration, as discussed in the Supplementary Note 2 and Supplementary Fig. 2. The polarizability of the particles is obtained from the dipolar Mie coefficient43 with the dielectric function of SiC modeled as \(\varepsilon (\omega ) = \varepsilon _\infty \left[ {1 + (\omega _{\mathrm{L}}^2 - \omega _{\mathrm{T}}^2)/(\omega _{\mathrm{T}}^2 - \omega ^2 - i\omega \gamma )} \right]\), with ε∞ = 6.7, ħωT = 98.3 meV, ħωL = 120 meV, and ħγ = 0.59 meV 44. With this choice of size and material, the optical response of the nanoparticles is dominated by a phonon polariton at ≈28 THz. Figure 2a shows the different components of H for the chain under analysis. As a consequence of the prevalent role of the near-field coupling, the matrix is almost tridiagonal. Furthermore, the diagonal elements are all negative, with the contribution of the environment, \(h_i^0\), being five orders of magnitude smaller than that of the particle–particle interaction hij, as shown in Fig. 2b. Interestingly, H is a negative definite matrix (i.e., all of its eigenvalues are strictly negative), which ensures that, in absence of external driving, the angular velocities decay to zero at large times.
The natural modes of the chain, together with the corresponding decay rates, are displayed in Fig. 2c. The first natural mode corresponds to all particles rotating with the same angular velocity, which makes the contribution arising from the particle–particle interaction vanish, leaving only the Casimir torque produced by the environment. This results in a decay rate λ1 = −0.95 × 10−6 s−1 (in perfect agreement with the stopping time calculated in ref. 14 for single particles), much smaller than those of the remaining modes, which are all on the order of s−1. In these other modes, the particles rotate with angular velocities of different magnitude and sign, but, as expected from the symmetry of the system, the modes are either even or odd with respect to the central particle, which, consequently, is at rest in the odd modes.
Figure 2d–f show the temporal evolution of the angular velocities of the particles for three different initial conditions. Specifically, in Fig. 2d, only particle 1 (black) is initially rotating with Ω1/2π = 10 GHz, an angular velocity that is within experimental reach, as recently demonstrated45,46. As time evolves, the rotation is transferred through the chain to the other particles, resulting in a synchronized rotation dynamics after a few seconds, in which the initial angular momentum is uniformly distributed among all particles. The situation is different when particle 5 (yellow) is also set to rotate initially at Ω5 = −Ω1. In this case, since the initial angular momentum of the system is zero, the rotation of the particles ends after a few seconds, as shown in Fig. 2e. It is important to notice that any initial state with finite angular momentum must have a nonzero overlap with the first natural mode. In these cases, after synchronization, the angular velocity of the particles gradually decreases and eventually stops on a much larger timescale ≈|λ1|−1, as a consequence of the Casimir torque produced by the environment (i.e., \(h_i^0\)). This can be seen in Fig. 2f, where we plot the temporal evolution of the chain when initialized in the first natural mode.
The rotation dynamics of chains with arbitrarily large N can be understood in a similar way by analyzing the corresponding decay rates and natural modes. In Fig. 3, we plot the decay rates of chains with different N as a function of an effective momentum keff, defined as keffd/π = (n−1)/(N−1), where n is the index labeling the natural modes. The effective momentum is directly proportional to the number of nodes of the natural mode, i.e., the number of times that its components change sign. Examining Fig. 3, we observe that, as N increases, the decay rates converge to a curve that resembles the dispersion relation of the transversal mode of the infinite chain47. As in the N = 5 case analyzed before, the first mode always corresponds to all particles rotating with the same angular velocity (see Supplementary Fig. 3), which means that only the environment contributes to the Casimir torque, thus resulting in a decay rate λ1 with values ≈10−6 s−1 for any N, as shown in the inset. As keff increases, the corresponding modes show a more complicated pattern in which neighboring particles rotate with increasingly different angular velocities (see Supplementary Fig. 3). This makes the contribution arising from the particle–particle interaction increase, leading to much faster decay rates.
Exotic dynamics
We can use the insight obtained from the analysis of the natural modes and decay rates to study the behavior of chains with more exotic rotation dynamics. In particular, by breaking the uniformity in the particle separation, it is possible to obtain a “rattleback”-like rotation dynamics32,33, in which a particle reverses its sense of rotation multiple times during the synchronization process. This is shown in Fig. 4a for a chain of N = 3 SiC particles with D = 10 nm, in which the central particle is, respectively, at distance 2d and d (with d = 1.5D) from the left and right particles, as depicted in the inset. Analyzing the dynamics of the system, we observe that particle 2 (red) changes its sense of rotation two times before all particles synchronize. This happens because this particle synchronizes first with particle 3, due to the smaller distance that separates them, which results in a larger coupling, and, therefore, Casimir torque, among them. After that, both particles 2 and 3 have to synchronize with particle 1 and, since the total initial angular momentum is positive, the synchronized angular velocities have to be positive. Interestingly, it is possible to obtain more reversals in the sense of rotation using chains with larger N, as shown in Supplementary Fig. 4 for a chain with five particles. In all cases, after synchronization, the rotation velocities of the particles decay as a consequence of the Casimir torque produced by the environment.
Another interesting situation arises when the particles in the chain have different sizes. In particular, it is possible to make the decay rates of two different modes equal, as shown in Fig. 4b for the N = 3 chain depicted in the inset of Fig. 4c, with D = 10 nm and d = 3D. Clearly, as the diameter of the central particle D′ increases, the decay rates of the second (green curve) and third (yellow curve) natural modes cross each other. At the crossing point D′ = 1.914D, the degeneracy of the natural modes allows us to prepare the system in an initial state such that angular momentum is only transferred between the central and one of the side particles, without altering the dynamics of the remaining one. We analyze two different examples of this behavior in Fig. 4c, where we plot the temporal evolution of the angular momentum, L(t) = IΩ(t), for each of the three particles. The corresponding initial angular velocities are: Ω1/2π = 10 GHz + Ωc/2π, Ω2/2π = −0.39 GHz + Ωc/2π, and Ω3 = Ωc (see the Supplementary Note 3). In the first example, we choose Ωc = 0, whereas in the second one, Ωc/2π = 5 GHz. In both cases, as expected, the angular momentum of particles 1 (black curve) and 2 (red curve) changes identically, but with opposite signs, while the angular momentum of particle 3 remains completely unchanged (blue curve).
Driven dynamics
So far, we have analyzed systems in free rotation, in which the initial angular momentum is transferred among the particles in the chain and is eventually dissipated into the surrounding environment. The situation is different when one or more particles in the chain are externally driven so their angular velocities remain constant. These particles act as a continuous source of angular momentum, which is transferred to the rest of the particles of the chain, and, as a consequence, after some transient evolution, the whole system reaches a steady-state rotation dynamics. As an initial example, we consider the chain of N = 30 identical SiC nanoparticles shown in the inset of Fig. 5a, in which particle 1 is externally driven at a constant angular velocity Ω1/2π = 10 GHz. We consider two different combinations of D and d for which we calculate the corresponding steady-state angular velocities, which are displayed in Fig. 5a. These velocities are determined by the interplay between the contributions to the Casimir torque arising from the environment and particle–particle interactions, with the former being the mechanism that dissipates angular momentum out of the chain, and the latter being the one that mediates its transfer between the particles. For D = 10 nm and d = 1.5D (black curve), the environment contribution is much smaller than that of the particle–particle interaction and, consequently, the angular velocities are almost identical. However, for D = 50 nm and d = 3D (red curve), the difference between the two contributions is reduced (see Supplementary Fig. 5), and, therefore, the angular velocities significantly decrease as we move away from the driven particle. This demonstrates that an efficient transfer of angular momentum is possible in systems for which \(|h_{ii}| \gg |h_i^0|\).
Another interesting situation arises when two particles in the chain are driven at opposite angular velocities. In this case, as shown in Fig. 5b, the particles located between them have steady-state angular velocities with values uniformly distributed between those of the driven particles. On the other hand, the particles outside display almost constant velocities, which are determined by the separation between the driven particles.
Discussion
In summary, we have shown that the Casimir torque enables an efficient transfer of angular momentum at the nanoscale. To that end, we have analyzed the dynamics of chains of rotating nanoparticles with an arbitrary number of elements. We have found that this noncontact interaction leads to rotational dynamics happening on timescales as fast as seconds for nanoscale particles, which corresponds to torques on the order of 10−27 N m for angular velocities of 10 GHz, both of which are within experimental reach13,45,46,48,49. We have derived an analytical formalism describing the rotational dynamics of these systems, which is based on the analysis of the natural modes of the chain, and exploited it to reveal unexpected behaviors. These include a “rattleback”-like dynamics, in which the sense of rotation of a particle changes multiple times before synchronization, as well as configurations for which a selected particle is left out of the angular momentum transfer process. Furthermore, by analyzing the steady-state angular velocities of systems in which one or more particles are externally driven, we have established the conditions under which an efficient transfer of angular momentum can be achieved. A possible experimental verification of our results would involve the use of nanoparticles trapped with optical tweezers45,46,48, or molecules with rotational degrees of freedom, such as as chains of fullerenes50, whose angular velocity can be detected through measurements of rotational frequency shifts51,52. The presented results describe a mechanism for the noncontact transfer of angular momentum at the nanoscale, which brings new opportunities for the control of nanomechanical devices.
Methods
The system under consideration is depicted in Fig. 1. It consists of a linear chain with N spherical nanoparticles. Each of the particles has a diameter Di and is separated from its neighbors by a center-to-center distance dij. All of the particles are allowed to rotate with arbitrary angular velocity Ωi around the axis of the chain, which we choose to be the z-axis. As discussed in the paper, we assume that the size of the particles is much smaller than the relevant wavelengths of the problem, which are determined by the temperature, the angular velocities, and the material properties of the particles, and use geometries obeying \(d_{ij} \ge \frac{3}{2}{\mathrm{max}}(D_i,D_j)\). Within these limits, we can model each particle as a point electric dipole with a frequency-dependent polarizability αi(ω). This allows us to write the torque acting on particle i as \(M_i = \langle{\mathbf{p}}_i(t) \times {\mathbf{E}}_i(t)\rangle \cdot \widehat {\mathbf{z}}\), where 〈〉 represents the average over fluctuations. Working in the frequency domain ω, defined via the Fourier transform \({\mathbf{p}}_i(t) = \mathop {\int}\limits_{ - \infty }^\infty {\frac{{{\mathrm{{d}}}\omega }}{{2\pi }}} {\mathbf{p}}_i(\omega ){\mathrm{{e}}}^{ - i\omega t}\), for the dipole moment, and similarly for other quantities, and using the circular basis defined as: \(\widehat {\mathbf{e}}_ \pm = (1/\sqrt 2 )(\widehat {\mathbf{x}} \pm i\widehat {\mathbf{y}})\), and \(\widehat {\mathbf{e}}_0 = \widehat {\mathbf{z}}\), we can rewrite the torque as \(M_i = M_i^ + - M_i^ -\) with
I-n this expression, * denotes the complex conjugate, while \(p_i^ \pm (\omega )\) and \(E_i^ \pm (\omega )\) are the self-consistent dipole moment and electric field in particle i, which originate from the vacuum and thermal fluctuations of: (i) the dipole moments of the particles in the chain \(p_j^{{\mathrm{fl}}, \pm }(\omega )\) and (ii) the electric field \(E_j^{{\mathrm{fl}}, \pm }(\omega )\). We can write \(p_i^ \pm (\omega )\) and \(E_i^ \pm (\omega )\) in terms of \(p_j^{{\mathrm{fl}}, \pm }(\omega )\) and \(E_j^{{\mathrm{fl}}, \pm }(\omega )\) as
where \(G_{ij}(\omega ) = (1 - \delta _{ij}){\mathrm{exp}}(ikd_{ij})[(kd_{ij})^2 + ikd_{ij} - 1]/d_{ij}^3\) is the dipole–dipole interaction between particles i and j, k = ω/c, and \(G_0(\omega ) = \frac{{2i}}{3}k^3\). Notice that the inclusion of G0(ω) is necessary to account for radiative corrections38. Furthermore, \(\alpha _{{\mathrm{eff}},i}^ \pm (\omega )\) is the effective polarizability of particle i as seen from the frame at rest. Following the notation of ref. 53, these equations can be solved simultaneously as
where \(A_{ij}^ \pm (\omega )\) are the matrix elements of the N × N matrix defined as \({\mathbf{A}}^ \pm (\omega ) = \left[ {{\cal{I}} - \alpha ^ \pm (\omega ){\mathbf{G}}(\omega )} \right]^{ - 1}\), with α± being a diagonal matrix whose components are \(\alpha _{{\mathrm{eff}},i}^ \pm (\omega )\), and G the dipole–dipole interaction matrix with components Gij(ω). Similarly, the other matrices are defined as \(B_{ij}^ \pm (\omega ) = A_{ij}^ \pm (\omega )\alpha _{{\mathrm{eff}},j}^ \pm (\omega )\), \(C_{ij}^ \pm (\omega ) = \mathop {\sum}\limits_{k = 1}^N {\left[ {\delta _{ik}G_0(\omega ) + G_{ik}(\omega )} \right]} A_{kj}^ \pm (\omega )\), and \(D_{ij}^ \pm (\omega ) = \delta _{ij} + C_{ij}^ \pm (\omega )\alpha _{{\mathrm{eff}},j}^ \pm (\omega )\). Using these expressions, we can write Eq. (1) in terms of averages over the dipole and field fluctuations
Notice that there are no cross terms involving dipole and field fluctuations since these are uncorrelated14. In order to evaluate the averages over fluctuations, we use the fluctuation–dissipation theorem14,35,36, which, for dipole fluctuations, taking into account the rotation of the particles, reads
where \(\omega _i^ \pm = \omega \pm {\mathrm{\Omega }}_i\) and we use \(\chi _i^ \pm (\omega ) = {\mathrm{Im}}\left\{ {\alpha _{{\mathrm{eff}},i}^ \pm (\omega )} \right\} - \frac{{2\omega ^3}}{{3c^3}}\left| {\alpha _{{\mathrm{eff}},i}^ \pm (\omega )} \right|^2\) instead of \({\mathrm{Im}}\{ {\alpha _{{\mathrm{eff}},i}^ \pm (\omega )} \}\) to account for the radiative corrections in the response of the nanoparticle54,55. Similarly, for the field fluctuations
In these expressions, ni(ω) = [exp(ℏω/kBTi)−1]−1 is the Bose–Einstein distribution at temperature Ti, while T0 is the temperature of the surrounding vacuum.
With these tools, we can evaluate the averaged dipole and field fluctuations occurring in Eq. (2). We begin with the first term in that equation, which involves the dipole fluctuations. After using the fluctuation–dissipation theorem given in Eq. (3), we get
We can simplify the integral over frequency by noting that \(n_i( - \omega \pm {\mathrm{\Omega }}_i) + \frac{1}{2} = - n_i(\omega \mp {\mathrm{\Omega }}_i) - \frac{1}{2}\) and that, due to causality, \(G_{ij}( - \omega ) = G_{ij}^ \ast (\omega )\) and \(\alpha _{{\mathrm{eff}},i}^ \pm ( - \omega ) = \alpha _{{\mathrm{eff}},i}^{ \mp \ast }(\omega )\), which also imply that \(T_{ij}^ \pm ( - \omega ) = T_{ij}^{ \mp \ast }(\omega )\), where T = A, B, C, or D. By doing so, we obtain
Using \(\mathop {\sum}\limits_{m = 1}^N {A_{im}^ \pm } (\omega )\alpha _{{\mathrm{eff}},m}^ \pm (\omega )G_{mj}(\omega ) = A_{ij}^ \pm (\omega ) - \delta _{ij}\), the expression above reduces to
where \(S_{ij}^ \pm (\omega ) = {\sum_{m = 1}^N} {A_{mi}^ \pm } (\omega )G_{mj}(\omega )\).
The second term in Eq. (2) can be computed in a similar way using, in this case, Eq. (4). This leads to
Following the same steps as above and using the definitions of \(B_{ij}^ \pm (\omega )\) and \(D_{ij}^ \pm (\omega )\), this expression reduces to
Finally, combining Eqs. (5) and (6), we obtain the expression of the Casimir torque given in the paper.
Data availability
The data that support the plots within this paper and other findings of this study are available from the corresponding author on reasonable request.
References
Andrews, D. L. & Babiker, M. The Angular Momentum of Light. (Cambridge University Press, United States, 2012).
Beth, R. A. Mechanical detection and measurement of the angular momentum of light. Phys. Rev. 50, 115–125 (1936).
Friese, M. E. J., Nieminen, T. A., Heckenberg, N. R. & Rubinsztein-Dunlop, H. Optical alignment and spinning of laser-trapped microscopic particles. Nature 394, 348–350 (1998).
Dalvit, D., Milonni, P., Roberts, D. & da Rosa, F. Casimir Physics. (Springer, Berlin, 2011).
Milonni, P. W. The Quantum Vacuum: An Introduction to Quantum Electrodynamics. (Academic Press, San Diego, 1994).
Woods, L. M. et al. Materials perspective on Casimir and van der waals interactions. Rev. Mod. Phys. 88, 045003 (2016).
Parsegian, V. A. & Weiss, G. H. Dielectric anisotropy and the van der waals interaction between bulk media. J. Adhes. 3, 259–267 (1972).
Barash, Y. S. Moment of van der waals forces between anisotropic bodies. Radiophys. Quantum Electron. 21, 1138–1143 (1978).
Munday, J. N., Iannuzzi, D., Barash, Y. & Capasso, F. Torque on birefringent plates induced by quantum fluctuations. Phys. Rev. A 71, 042102 (2005).
Somers, D. A. T. & Munday, J. N. Casimir-Lifshitz torque enhancement by retardation and intervening dielectrics. Phys. Rev. Lett. 119, 183001 (2017).
Somers, D. A. T., Garrett, J. L., Palm, K. J. & Munday, J. N. Measurement of the Casimir torque. Nature 564, 386–389 (2018).
Guérout, R., Genet, C., Lambrecht, A. & Reynaud, S. Casimir torque between nanostructured plates. Europhys. Lett. 111, 44001 (2015).
Xu, Z. & Li, T. Detecting Casimir torque with an optically levitated nanorod. Phys. Rev. A 96, 033843 (2017).
Manjavacas, A. & García de Abajo, F. J. Vacuum friction in rotating particles. Phys. Rev. Lett. 105, 113601 (2010).
Manjavacas, A. & García de Abajo, F. J. Thermal and vacuum friction acting on rotating particles. Phys. Rev. A 82, 063827 (2010).
Bercegol, H. & Lehoucq, R. Vacuum friction on a rotating pair of atoms. Phys. Rev. Lett. 115, 090402 (2015).
Zhao, R., Manjavacas, A., García de Abajo, F. J. & Pendry, J. B. Rotational quantum friction. Phys. Rev. Lett. 109, 123604 (2012).
Dedkov, G. & Kyasov, A. Fluctuation electromagnetic interaction between a small rotating particle and a surface. Europhys. Lett. 99, 64002 (2012).
Manjavacas, A., Rodríguez-Fortuño, F. J., García de Abajo, F. J. & Zayats, A. V. Lateral Casimir force on a rotating particle near a planar surface. Phys. Rev. Lett. 118, 133605 (2017).
Jiang, Q.-D. & Wilczek, F. Axial Casimir force. Phys. Rev. B 99, 165402 (2019).
Pan, D., Xu, H., & García de Abajo, F.J. Magnetically activated thermal vacuum torque. arXiv:1706.02924v2 (2017).
Munday, J. N. & Capasso, F. Repulsive Casimir and van der Waals forces: from measurements to future technologies. Int. J. Mod. Phys. A 25, 2252–2259 (2010).
Maghrebi, M. F., Jaffe, R. L. & Kardar, M. Spontaneous emission by rotating objects: A scattering approach. Phys. Rev. Lett. 108, 230403 (2012).
Kyasov, A. A. & Dedkov, G. V. Fluctuation electromagnetic interaction between rotating spherical nanoparticles. 1. Nonrelativistic theory. arXiv:1209.4880 (2012).
Chen, X. Casimir torque on two rotating plates. Int. J. Mod. Phys. 27, 1350066 (2013).
Kyasov, A. A. & Dedkov, G. V. Comment on Casimir torque on two rotating plates. arXiv:1403.5412 (2014).
Chen, X. Erratum: Casimir torque on two rotating plates. Int. J. Mod. Phys. 28, 1492002 (2014).
Lannebére, S. & Silveirinha, M. G. Wave instabilities and unidirectional light ow in a cavity with rotating walls. Phys. Rev. A 94, 033810 (2016).
Volokitin, A. I. Anomalous Doppler-effect singularities in radiative heat generation, interaction forces, and frictional torque for two rotating nanoparticles. Phys. Rev. A 96, 012520 (2017).
Ameri, V. & Eghbali-Arani, M. Rotational synchronization of two noncontact nanoparticles. J. Opt. Soc. Am. B 34, 2514–2518 (2017).
Reid, M.T.H. et al., Photon torpedoes and rytov pinwheels: integral-equation modeling of non-equilibrium uctuation-induced forces and torques on nanoparticles. arXiv:1708.01985 (2017).
Garcia, A. & Hubbard, M. Spin reversal of the rattleback: theory and experiment. Proc. R. Soc. Lond. A 418, 165–197 (1988).
Kondo, Y. & Nakanishi, H. Rattleback dynamics and its reversal time of rotation. Phys. Rev. E 95, 062207 (2017).
Jackson, J. D. Classical Electrodynamics. (Wiley, New York, 1999).
Nyquist, H. Thermal agitation of electric charge in conductors. Phys. Rev. 32, 110–113 (1928).
Callen, H. B. & Welton, T. A. Irreversibility and generalized noise. Phys. Rev. 83, 34–40 (1951).
Novotny, L. & Hecht, B. Principles of Nano-Optics. (Cambridge University Press, New York, 2006).
Nieto-Vesperinas, M. Optical torque on small biisotropic particles. Opt. Lett. 40, 3021–3024 (2015).
Maghrebi, M. F., Golestanian, R. & Kardar, M. Quantum Cherenkov radiation and noncontact friction. Phys. Rev. A 88, 042509 (2013).
Maghrebi, M. F., Golestanian, R. & Kardar, M. Scattering approach to the dynamical Casimir effect. Phys. Rev. D. 87, 025016 (2013).
Maghrebi, M. F., Jaffe, R. L. & Kardar, M. Nonequilibrium quantum uctuations of a dispersive medium: spontaneous emission, photon statistics, entropy generation, and stochastic motion. Phys. Rev. A 90, 012515 (2014).
Pan, D., Xu, H. & García de Abajo, F.J. Circular dichroism in rotating particles. arXiv:1904.01137v1 (2019).
Myroshnychenko, V. et al. Modelling the optical response of gold nanoparticles. Chem. Soc. Rev. 37, 1792–1805 (2008).
Palik, E. D. Handbook of Optical Constants of Solids. (Academic Press, San Diego, 1985).
Reimann, R. et al. Ghz rotation of an optically trapped nanoparticle in vacuum. Phys. Rev. Lett. 121, 033602 (2018).
Ahn, J. et al. Optically levitated nanodumbbell torsion balance and GHz nanomechanical rotor. Phys. Rev. Lett. 121, 033603 (2018).
Weber, W. H. & Ford, G. W. Propagation of optical excitations by dipolar interactions in metal nanoparticle chains. Phys. Rev. B 70, 125429 (2004).
Monteiro, F., Ghosh, S., Assendelft, E. Cvan & Moore, D. C. Optical rotation of levitated spheres in high vacuum. Phys. Rev. A 97, 051802 (2018).
Rashid, M., Toroš, M., Setter, A. & Ulbricht, H. Precession motion in levitated optomechanics. Phys. Rev. Lett. 121, 253601 (2018).
Warner, J. H. et al. Rotating fullerene chains in carbon nanopeapods. Nano Lett. 8, 2328–2335 (2008).
Bialynicki-Birula, I. & Bialynicka-Birula, Z. Rotational frequency shift. Phys. Rev. Lett. 78, 2539–2542 (1997).
Michalski, M., Hüttner, W. & Schimming, H. Experimental demonstration of the rotational frequency shift in a molecular system. Phys. Rev. Lett. 95, 203005 (2005).
Nikbakht, M. Radiative heat transfer in anisotropic many-body systems: tuning and enhancement. J. Appl. Phys. 116, 094307 (2014).
Manjavacas, A. & García de Abajo, F. J. Radiative heat transfer between neighboring particles. Phys. Rev. B 86, 075466 (2012).
Messina, R., Tschikin, M., Biehs, S.-A. & Ben-Abdallah, P. Fluctuation electrodynamic theory and dynamics of heat transfer in systems of multiple dipoles. Phys. Rev. B 88, 104307 (2013).
Acknowledgements
This work has been partially sponsored by the U.S. National Science Foundation (Grant ECCS-1710697). We would like to thank the UNM Center for Advanced Research Computing, supported in part by the National Science Foundation, for providing the high performance computing resources used in this work. W.J.M.K.-K. and D.A.R.D. acknowledge financial support from LANL LDRD program. We are also grateful to Prof. Javier García de Abajo for valuable and enjoyable discussions.
Author information
Authors and Affiliations
Contributions
A.M. proposed the study and developed the theory on the many-body torque transfer with input from the other authors. W.J.M.K.-K., D.A.R.D. and A.M. worked out the polarizability models for the rotating nanoparticle. S.S. performed the numerical calculations. All authors discussed the results and contributed to the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing Interests.
Additional information
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sanders, S., Kort-Kamp, W.J.M., Dalvit, D.A.R. et al. Nanoscale transfer of angular momentum mediated by the Casimir torque. Commun Phys 2, 71 (2019). https://doi.org/10.1038/s42005-019-0163-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s42005-019-0163-3