Abstract
We propose a quantum interference cooling scheme for a nano-mechanical resonator (NAMR) in a hybrid optomechanical system. In our scheme, atoms are trapped in an optomechanical cavity, and this optomechanical cavity interacts both atoms and an optical cavity. Therefore, the absorption of the optomechanical resonator can be modified by quantum interference effects induced by the atom-cavity and cavity-cavity couplings. With the modification of the quantum interference, the desired transition for cooling is enhanced, while the undesired transition for heating can be suppressed. As a result, the NAMR vibration can be cooled down to its ground state. Particularly, with the assistance of the atoms, the experimental difficulty can be reduced since the effective decay rate of the cavity can be decreased via the quantum interference for the atom-cavity coupling.
Similar content being viewed by others
Introduction
Cavity optomechanics works as an ideal platform to study the quantum properties of macroscopic mechanical systems. For this reason, it has been employed to create non-classical states1,2, realize quantum information processing3,4,5,6,7,8,9, and achieve precision control and measurement10,11,12,13. Although the NAMR is very sensitive to small deformation, and the precision measurement based on NAMR can approach to the Heisenberg limit14, the precision measurement is limited by the thermal noise on the NAMR. To further enhance the measurement sensibility, it is necessary to eliminate the thermal noise and cool the NAMR down to its ground state.
Until now, many different cooling schemes have been proposed to achieve the ground-state cooling of NAMR15,16,17,18. The most famous cooling method is the sideband cooling19,20,21, which works in the resolved-sideband regime, where the decay rates of the system is much less than the vibrational frequency of the NAMR, and it has been verified experimentally22. However, as the decay rates of the systems are always larger than the vibrational frequency of the NAMR, the sideband cooling is hard to be realized in the most of physical systems with NAMRs.
As such, considerable efforts have been made in the nonresolved-sideband regime, in which the decay rates would be larger than the vibrational frequency of the NAMR. For example, this kind of cooling can be realized with a dissipative coupling23,24,25,26,27, where the main dissipation is employed as the coupling between the cavity and the NAMR, and a fast ground-state cooling of the NAMR is available with time-dependent optical driven cavities28, where the large decay rates are employed to drive the cavities. The essential cooling method in the nonresolved-sideband regime is based on quantum interference29,30,31,32, in which the quantum interference is used to modify the absorption spectrum of the NAMR, and the NAMR can be cooled to its the ground state. The modification of the absorption spectrum is due to destructive interference of quantum noise24,25. Since there are large decay rates in the cooling schemes via quantum interference, the speed for quantum interference cooling can be much faster than the one for sideband cooling33.
On the other hand, with the development of the optomechanics34, the field of hybrid atom-optomechanics becomes an essential branch of the optomechanics. With the assistance of an additional atom, the quantum features of the optomechanic can be adjusted35,36, and atom-mechanical entanglement and quantum steering can also be achieved in this system37,38,39. Moreover, it has been shown theoretically and experimentally that the ground-state cooling of NAMR can be realized in hybrid atom-optomechanical systems40,41,42, as the absorption spectrum of the NAMR can be modified by the interaction between the atoms and the optical field indirectly, which allows the NAMR to be cooled down to its vibrational ground state.
Here we propose a cooling scheme with atoms trapped in an optomechanical cavity, which couples to a single-mode optical cavity. In our system, there are two different channels for quantum interference effects, one is from the atom-cavity coupling and the other is from the cavity-cavity coupling. Both of them satisfy the conditions for two-photon resonance. The combination of these two quantum interference effects can not only reduce the experimental difficult on the cavity quality, but also enhance the transition for cooling and suppress the one for heating. As a result, the ground-state cooling of the NAMR can be achieved.
Compared with the previous works involving only one quantum interference effect43,44,45, our scheme with the additional quantum interference effect is more efficient and can cool the NAMR down to its ground state with less mean phonon number. Moreover, different from the previous works for cooling, which is limited by the decay rates of the cavity43,44 and the atoms45, our scheme can work even with larger decay rates due to the combination of two quantum interference effects. As a result, our scheme reduces the experimental difficulty and works within a broader parameter regime.
Results
Model, Hamiltonian
As shown in Fig. 1, an ensemble of N atoms are trapped in an optomechanical cavity 2 with an atom-cavity coupling strength ga46. The optomechanical cavity 2 couples to a single-mode cavity 1 with a strength J, and is also driven by an external field at a frequency ωl with a driven strength ε. Thus the Hamiltonian of this system can be written as (ħ = 1)
where aj (\({a}_{j}^{\dagger }\), j = 1, 2) and b \(({b}^{\dagger })\) are annihilation (creation) operators for cavity j and NAMR, which take the corresponding frequencies ωj and ωm, respectively, each atom in the ensemble owns an excited state \(|e\rangle \) and a ground state \(|g\rangle \) with a transition frequency ωeg, \({S}_{eg}={\sum }_{\mu \mathrm{=1}}^{N}\,|{e}^{\mu }\rangle \langle {g}^{\mu }|\) and \({S}_{ee}={\sum }_{\mu \mathrm{=1}}^{N}\,|{e}^{\mu }\rangle \langle {e}^{\mu }|\); g is the single-photon radiation coupling coefficient. The first four items in Hamiltonian (1) are for the free Hamiltonians of the two cavities, the NAMR and the atoms, respectively. The fifth item shows the driven field on the optomechanics. The last items describe the interactions for cavity-cavity, atom-cavity, and radiation coupling, respectively.
Assume the atom number N of the atomic ensemble is large enough, under the condition of the weak excitation, we can define the ground and excited state of the atomic ensemble as |g〉 = |g1, g2, ..., gN〉 and \(|{\bf{e}}\rangle =\frac{1}{\sqrt{N}}{\Sigma }_{j\mathrm{=1}}^{N}\,|{g}_{1},{g}_{2},,{e}_{j},\,\ldots ,\,{g}_{N}\rangle \), respectively. Then the above Hamiltonian (1) can be rewritten as
with See = |e〉〈e| and Seg = |e〉〈g|.
Define the detuning Δ1,2 = ω1,2 − ωl and Ω = ωeg − ωl and assume \(({g}_{a}\sqrt{N},{g}_{a}\langle {a}_{2}\rangle )\ll |{\rm{\Omega }}-{{\rm{\Delta }}}_{2}|\), we can ensure that only one of the atom in the atomic ensemble can be virtual excited37,47. In the rotating frame with frequency ωl, the Hamiltonian (2) can be rewritten as
The dynamics of this system is governed by following quantum Langevin equations,
where κj, γm and γ denote the decay rates of the cavity j, NAMR and atomic ensemble, respectively. Oin is the noise operator with a nonzero correlation function \(\langle {O}_{in}(t){O}_{in}^{\dagger }(t^{\prime} )\rangle =\delta (t-t^{\prime} )\), for O = a1,2, and f. bin is the quantum Brownian noise operator of the NAMR with correlation functions \(\langle {b}_{in}^{\dagger }(t){b}_{in}(t^{\prime} )\rangle ={n}_{m}\delta (t-t^{\prime} )\), and \(\langle {b}_{in}(t){b}_{in}^{\dagger }(t^{\prime} )\rangle =({n}_{m}+\mathrm{1)}\delta (t-t^{\prime} )\), where nm = [exp(ωm/(kBT)) − 1]−1 is the thermal phonon number with kB and T being the Boltzmann constant and the environment temperature, respectively.
Suppose that the atomic ensemble is initially in its the ground state \(|{\bf{g}}\rangle \)48. Then the steady-state values of the system are
with \({\tilde{{\rm{\Delta }}}}_{2}={{\rm{\Delta }}}_{2}-g(\langle b\rangle +\langle {b}^{\dagger }\rangle )\). In the case of ga = 0, our system would be reduced to the model in ref.43.
Under the condition of the weak excitation, only one atom can be virtual excited, and the rest atoms are in ground state37,47. With the application of the linearization approximation18,19, all the operators can be written as the sum of steady-state mean values and their fluctuations, e.g., a1,2 = 〈a1,2〉 + δa1,2, b = 〈b〉 + δb, Sge = 〈Sge〉 + δSge. Then the above Langevin equations are rewritten as
with G = g〈a2〉.
The corresponding effective Hamiltonian for the above Langevin equations can be described by
with
The rate equations for cooling
Following the method in refs19,49, the rate equation for the phonon on the NAMR is given by
where Pn is the probability for the NAMR in the Fock state \(|n\rangle \). A− = G2SFF(ωm) is the cooling rate of the NAMR while A+= G2SFF(−ωm) is for the heating rate, and \({S}_{FF}(\omega )=\int dt{e}^{i\omega t}\langle F(t)F\mathrm{(0)}\rangle \) is the absorption spectrum for the radiation force \(F=\delta {a}_{2}^{\dagger }+\delta {a}_{2}\).
To obtain the absorption spectrum, we write the Langevin equations of Hamiltonian (6) for cooling as follows
In the weak coupling regime, the back action of the NAMR can be ignored. So the absorption spectrum SFF(ω) of the radiation force can be calculated from the quantum Langevin Eq. (8) as
with
The three items in Eq. (9) correspond to the correlation functions of the fluctuations from the cavity 2, cavity 1, and atoms, respectively.
With the application of the rate Eq. (7), the final mean phonon number of the NAMR is
where
is the extra damping rate of the mechanical oscillator,
is the final mean phonon number under the ideal condition.
Absorption spectrums and cooling processes
Now, we will discuss the absorption spectrum and the cooling processes in our system.
The absorption spectrum SFF(ω) versus the frequency ω with different coupling strengths (J, ga) are plotted in Fig. 2. Since the optomechanical cavity works in the nonresolved-sideband regime, i.e., the decay rate of cavity is much larger than the frequency of the NAMR, when the optomechanical cavity 2 is decoupled from the cavity 1 and the atom ensemble (J = 0, N = 0), the absorption spectrum is in a Lorentz profile with a half width κ2. On the other hand, with the assistance of the good cavity and the atomic ensemble, the Lorentz profile can be modified to a Fano one for quantum interference50,51, and the ground-state cooling of the NAMR can be achieved for this reason.
Quantum interference can be followed from the eigen-energies of the dressed states of Hamiltonian (6)
here we have set Δ1 = Ω. These three eigen-energies correspond to three inflection points in the absorption spectrum SFF(ω) [see Fig. 2]. E0 = Ω denotes a dark state, meaning no absorption at this point for the quantum destructive interference. As a result, we can set
to suppress the transition for heating process. Moreover, to get the ground-state cooling of the NAMR, the value SFF(ω = ωm) in the absorption spectrum for cooling must be enhanced. In other words, it is necessary to ensure E+= ωm, so that the absorption spectrum SFF(ω = ωm) can reach its maximum value by adjusting the coupling strengths (J, ga) with quantum constructive interference. Then, we get the optimal condition for two coupling strengths as
which is independent of the decay rates, since the eigen-energy has no relation with the decay rates.
Figure 3 shows the absorption spectrum SFF(ω) versus ω for the decay rate κ1 of the cavity a1 with parameters of \({\tilde{{\rm{\Delta }}}}_{2}\) = −0.1 ωm and J = 0.45 ωm. Under the optimal condition as Eq. (14), the heating process can be completely suppressed [i.e., the value of SFF(ω = −ωm) approaches zero], the absorption spectrum value SFF(ω = ωm) for the cooling process can reach its maximal value of the curve with a good cavity (κ1 = 0.1 ωm). With the increase of the cavity decay rate κ1, a ground-state cooling can still be achieved with a bad cavity (κ1 = 3 ωm), since the absorption spectrum for the bad cavity is almost same as the one for the good cavity. It results from the fact that the heating process is suppressed by the quantum interference for the atom-cavity coupling. As such, different from the methods in refs43,44,45, where the good cavity43,44 (atom45)is an essential condition to guarantee the minimal value SFF(−ωm) approaching zero, our scheme, which combines two quantum interference effects, can work beyond this condition.
With the assistance of quantum interference, the cooling mechanism of the hybrid optomechanical system in our scheme can be understood from Fig. 4, where \(|{n}_{1}\rangle \), \(|{n}_{2}\rangle \) and \(|{n}_{b}\rangle \) are the states of the single-mode cavity 1, optomechanical cavity 2 and the NAMR, respectively. If the system is initially in the state \(|{\bf{g}},{n}_{1},{n}_{2},{n}_{b}\rangle \), under the action of the optical pump field, the photons are injected into the optomechanical cavity 2, the state \(|{\bf{g}},{n}_{1},{n}_{2},{n}_{b}\rangle \) will evolve to the state \(|{\bf{g}},{n}_{1},{n}_{2}+1,{n}_{b}\rangle \). In this situation, the photons in optomechanical cavity 2 are transferred into the phonons on the NAMR via the transition \(|{\bf{g}},{n}_{1},{n}_{2}+1,{n}_{b}\rangle \to |{\bf{g}},{n}_{1},{n}_{2},{n}_{b}+1\rangle \) by the radiation coupling G. This cooling transition can be enhanced by two quantum constructive interference effects. One is between the two transitions \(|{\bf{g}},{n}_{1},{n}_{2}+1,\,{n}_{b}\rangle \) → \(|{\bf{g}},{n}_{1}+1,{n}_{2},{n}_{b}\rangle \) → \(|{\bf{g}},{n}_{1},{n}_{2},{n}_{b}\rangle \) and \(|{\bf{g}},{n}_{1},{n}_{2}+1,{n}_{b}\rangle \) → \(|{\bf{g}},{n}_{1},{n}_{2},{n}_{b}\rangle \). The other is from the transitions \(|{\bf{g}},{n}_{1},{n}_{2}+1,{n}_{b}\rangle \) → \(|{\bf{e}},{n}_{1},{n}_{2},{n}_{b}\rangle \) → \(|{\bf{g}},{n}_{1},{n}_{2},{n}_{b}\rangle \). These two quantum constructive interference effects can also enhance the transition from \(|{\bf{g}},{n}_{1},{n}_{2},{n}_{b}+1\rangle \) to \(|{\bf{g}},{n}_{1},{n}_{2}+1,{n}_{b}\rangle .\)
Numerical Simulation
Next, we will verify the cooling effect of our scheme with experimental parameters. These experimental parameters for simulations are the follows52: ωm = 2π × 20 MHz, Qm = ωm/γm = 8 × 104, g = 1.2 × 10−4 ωm, |ε| = 600 ωm, T = 300 mK), Δ1 = Ω = −ωm and κ2 = 3 ωm.
The final mean phonon numbers nc (nf) versus the cavity-cavity coupling strength J in the resolved regime and non-resolved regime are simulated in Fig. 5(a,b), respectively. When the system works in the resolved regime, in the idea case (T = 0 K), with the increase of the cavity-cavity coupling strength J, the final mean phonon number nc can be approach to zero [see Fig. 5(a)]. It’s due to the fact that, with the increase of the cavity-cavity coupling strength J, the quantum interfrence can enhance the line width of the spectrum for non-absorption, and suppress the 2nd-order transition for heating largely. Note that, when the atomic ensemble is decoupled from the optomechanical cavity \((\sqrt{N}{g}_{a}=0)\), our results return to the ones in refs43,44. Moreover, after the environmental heating is included, the final phonon number will be increased. It results from the fact that, with the increase of the cavity-cavity coupling strength J, the eigen-energy \({E}_{+}=\frac{1}{2}({\rm{\Omega }}+{\tilde{{\rm{\Delta }}}}_{2}+\sqrt{\mathrm{4(}{J}^{2}+{g}_{a}^{2}N)+{({\rm{\Omega }}-{\tilde{{\rm{\Delta }}}}_{2})}^{2}})\) will deviate from E+ ≡ ωm, and the cooling rate will decrease, while the environmental heating is a constant, and the final phonon number will increase.
It’s worthy to point out the follows. With the introduction of the atomic ensemble, our scheme can cool the NAMR to its ground state when the cavity-cavity coupling is very weak, since the additional quantum interference can be created by the atom-cavity coupling.
On the other hand, when the system works in the non-resolved regime, the quantum interference for the cavity-cavity coupling can’t cool the NAMR to its ground state, since the first blue side-band transition can’t be suppressed totally when the cavity decay rate is very large. However, this problem can be overcome by adding the atomic ensemble [see Fig. 5(b)]. In this situation, the additional quantum interference caused by the atoms can further modify the absorption spectrum, and the final mean phonon number nc turns to be very close to nc = 0 [see black line in Fig. 5(b)]. It means that the hybrid optomechanical system in our scheme can cool the NAMR to its ground state more effectively due to the combination of two quantum interference effects for the atom-cavity coupling and cavity-cavity coupling, and thus the experimental difficulties are reduced in this way.
Discussion
In summary, we have shown the NAMR can be cooled to its ground state in the hybrid optomechanical system, where one two-level atomic ensemble is trapped in the optomechanical cavity, which is coupling to an additional optical cavity. Due to combination of two quantum interference effects from the atom-cavity coupling and cavity-cavity coupling, the heating processes are suppressed, while the cooling processes are enhanced. Compared with previous cooling methods involving only one quantum interference effect43,44,45, the combination of two quantum interference effects can reduce the limit on the line-widths of the cavity and atoms. As a result, our scheme can cool the NAMR down to its ground state more efficiently. In particular, our scheme is experimentally feasible for lower-quality cavities, and the experimental difficulty can be reduced in this way.
References
Tan, H. T. & Li, G. X. Multicolor quadripartite entanglement from an optomechanical cavity. Phys. Rev. A 84, 024301 (2011).
Hartmann, M. J. & Plenio, M. B. Steady state entanglement in the mechanical vibrations of two dielectric membranes. Phys. Rev. Lett. 101, 200503 (2008).
Fiore, V. et al. Storing Optical Information as a Mechanical Excitation in a Silica Optomechanical Resonator. Phys. Rev. Lett. 107, 133601 (2011).
Wang, Y.-D. & Clerk, A. A. Using Interference for High Fidelity Quantum State Transfer in Optomechanics. Phys. Rev. Lett. 108, 153603 (2012).
Dong, C., Fiore, V., Kuzyk, M. C. & Wang, H. Optomechanical Dark Mode. Science 338, 1609 (2012).
Schmidt, M., Ludwig, M. & Marquardt, F. Optomechanical creation of magnetic fields for photons on a lattice. New J. Phys. 14, 125005 (2012).
Li, H.-K., Ren, X.-X., Liu, Y.-C. & Xiao, Y.-F. Photon-photon interactions in a largely detuned optomechanical cavity. Phys. Rev. A 88, 053850 (2013).
Deng, Z. J., Habraken, S. J. M. & Marquardt, F. Entanglement rate for Gaussian continuous variable beams. New J. Phys. 18, 063022 (2016).
Su, S.-L. et al. Fast Rydberg antiblockade regime and its applications in quantum logic gates. Phys. Rev. A 95, 022319 (2017).
LaHaye, M. D., Buu, O., Camarota, B. & Schwab, K. C. Approaching the quantum limit of a nanomechanical resonator. Science 304, 74 (2004).
Krause, A. G., Winger, M., Blasius, T. D., Lin, Q. & Painter, O. A high-resolution microchip optomechanical accelerometer. Nat. Photon. 6, 768 (2012).
Buchmann, L. F., Jing, H., Raman, C. & Meystre, P. Optical control of a quantum rotor. Phys. Rev. A 87, 031601(R) (2013).
Purdy, T. P., Peterson, R. W. & Regal, C. A. Observation of Radiation Pressure Shot Noise on a Macroscopic Object. Science 339, 801 (2013).
Schliesser, A., Arcizet, O., Riviere, R., Anetsberger, G. & Kippenberg, T. J. Resolved-sideband cooling and position measurement of a micromechanical oscillator close to the Heisenberg uncertainty limit. Nat. Phys. 5, 509 (2009).
Kippenberg, T. J. & Valaha, K. J. Cavity optomechanics: Back-action at the mesoscale. Science 321, 1172 (2008).
Favero, I. & Karrai, K. Optomechanics of deformable optical cavities. Nature Photon. 3, 201 (2009).
Aspelmeyer, M. et al. Quantum optomechanics throwing a glance. J. Opt. Soc. Am. B 27, A189 (2010).
Marquardt, F. & Girvin, S. Optomechanics. Physics 2, 40 (2009).
Wilson-Rae, I., Nooshi, N., Zwerger, W. & Kippenberg, T. J. Theory of Ground State Cooling of a Mechanical Oscillator Using Dynamical Backaction. Phys. Rev. Lett. 99, 093901 (2007).
Marquardt, F., Chen, J. P., Clerk, A. A. & Girvin, S. M. Quantum Theory of Cavity-Assisted Sideband Cooling of Mechanical Motion. Phys. Rev. Lett. 99, 093902 (2007).
Genes, C., Vitali, D., Tombesi, P., Gigan, S. & Aspelmeyer, M. Ground-state cooling of a micromechanical oscillator: Comparing cold damping and cavity-assisted cooling schemes. Phys. Rev. A 77, 033804 (2008).
Rivière, R. et al. Optomechanical sideband cooling of a micromechanical oscillator close to the quantum ground state. Phys. Rev. A 83, 063835 (2011).
Li, M., Pernice, W. H. P. & Tang, H. X. Reactive Cavity Optical Force on Microdisk-Coupled Nanomechanical Beam Waveguides. Phys. Rev. Lett. 103, 223901 (2009).
Elste, F., Girvin, S. M. & Clerk, A. A. Quantum Noise Interference and Backaction Cooling in Cavity Nanomechanics. Phys. Rev. Lett. 102, 207209 (2009).
Xuereb, A., Schnabel, R. & Hammerer, K. Dissipative Optomechanics in a Michelson-Sagnac Interferometer. Phys. Rev. Lett. 107, 213604 (2011).
Weiss, T. & Nunnenkamp, A. Quantum limit of laser cooling in dispersively and dissipatively coupled optomechanical systems. Phys. Rev. A 88, 023850 (2013).
Yan, M.-Y., Li, H.-K., Liu, Y.-C., Jin, W.-L. & Xiao, Y.-F. Dissipative optomechanical coupling between a single-wall carbon nanotube and a high-Q microcavity. Phys. Rev. A 88, 023802 (2013).
Li, Y., Wu, L.-A. & Wang, Z. D. Fast ground-state cooling of mechanical resonators with time-dependent optical cavities. Phys. Rev. A 83, 043804 (2011).
Ojanen, T. & Børkje, K. Ground-state cooling of mechanical motion in the unresolved sideband regime by use of optomechanically induced transparency. Phys. Rev. A 90, 013824 (2014).
Liu, Y.-C., Xiao, Y.-F., Luan, X. S. & Wong, C. W. Optomechanically-induced-transparency cooling of massive mechanical resonators to the quantum ground state. Sci. China-Phys. Mech. Astron. 58, 050305 (2015).
Sarma, B. & Sarma, A. K. Ground-state cooling of micromechanical oscillators in the unresolved-sideband regime induced by a quantum well. Phys. Rev. A 93, 033845 (2016).
Feng, J.-S., Tan, L., Gu, H.-Q. & Liu, W.-M. Auxiliary-cavity-assisted ground-state cooling of an optically levitated nanosphere in the unresolved-sideband regime. Phys. Rev. A 96, 063818 (2017).
Gu, W. J. & Li, G. X. Quantum interference effects on ground-state optomechanical cooling. Phys. Rev. A 87, 025804 (2013).
Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Rev. Mod. Phys. 86, 1391 (2014).
Pflanzer, A. C., Romero-Isart, O. & Ignacio Cirac, J. Optomechanics assisted by a qubit: From dissipative state preparation to many-partite systems. Phys. Rev. A 88, 033804 (2013).
Ian, H., Gong, Z. R., Liu, Y. X., Sun, C. P. & Nori, F. Cavity optomechanical coupling assisted by an atomic gas. Phys. Rev. A 78, 013824 (2008).
Genes, C., Ritsch, H., Drewsen, M. & Dantan, A. Atom-membrane cooling and entanglement using cavity electromagnetically induced transparency. Phys. Rev. A 84, 051801(R) (2011).
Li, L. C., Hu, X. M., Rao, S. & Xu, J. Atom-mirror entanglement via cavity dissipation. Phys. Rev. A 91, 052320 (2015).
Tan, H. T. & Sun, L. H. Hybrid Einstein-Podolsky-Rosen steering in an atom-optomechanical system. Phys. Rev. A 92, 063812 (2015).
Zhang, S. et al. Ground state cooling of an optomechanical resonator assisted by a Λ-type atom. Opt. Express 22, 028118 (2013).
Vogell, B. et al. Cavity-enhanced long-distance coupling of an atomic ensemble to a micromechanical membrane. Phys. Rev. A 87, 023816 (2013).
Shi, X. F., Bariani, F. & Kennedy, T. A. B. Entanglement of neutral-atom chains by spin-exchange Rydberg interaction. Phys. Rev. A 90, 062327 (2014).
Guo, Y. J., Li, K., Nie, W. J. & Li, Y. Electromagnetically-induced-transparency-like ground-state cooling in a double-cavity optomechanical system. Phys. Rev. A 90, 053841 (2014).
Liu, Y.-C., Xiao, Y.-F., Luan, X. S., Gong, Q. H. & Wong, C. W. Coupled cavities for motional ground-state cooling and strong optomechanical coupling. Phys. Rev. A 91, 033818 (2015).
Genes, C., Ritsch, H. & Vitali, D. Micromechanical oscillator ground-state cooling via resonant intracavity optical gain or absorption. Phys. Rev. A 80, 061803(R) (2009).
Bariani, F., Singh, S., Buchmann, L. F., Vengalattore, M. & Meystre, P. Hybrid optomechanical cooling by atomic Λ systems. Phys. Rev. A 90, 033838 (2014).
Zheng, S.-B. & Guo, G.-C. Efficient Scheme for Two-Atom Entanglement and Quantum Information Processing in Cavity QED. Phys. Rev. Lett. 85, 2392 (2000).
Zhou, L., Han, Y., Jing, J. T. & Zhang, W. P. Entanglement of nanomechanical oscillators and two-mode fields induced by atomic coherence. Phys. Rev. A 83, 052117 (2011).
Clerk, A. A., Devoret, M. H., Girvin, S. M., Marquardt, F. & Schoelkopf, R. J. Introduction to quantum noise, measurement, and amplification. Rev. Mod. Phys. 82, 1155 (2010).
Li, Y., Wang, Z. D. & Sun, C. P. Optically-driven cooling for collective atomic excitations. Eur. Phys. J. D 61, 215 (2011).
Turek, Y., Li, Y. & Sun, C. P. Electromagnetically-induced-transparency-like phenomenon with two atomic ensembles in a cavity. Phys. Rev. A 88, 053827 (2013).
Anetsberger, G., Rivière, R., Schliesser, A., Arcizet, O. & Kippenberg, T. J. Ultralow-dissipation optomechanical resonators on a chip. Nat. Photon. 2, 627 (2008).
Acknowledgements
This work is supported by the National Natural Science Foundation of China (NSFC) (Grant Nos 91636220 and 11674360, 11547113), the Talent Introduction Fund (No. 2016BS019) and the Youth Support Plan of Nature Science Fundamental Research (No. 2017QNJH21) at Henan University of Technology.
Author information
Authors and Affiliations
Contributions
L.L.C. carried out all calculations under the guidance of Z.S., Z.J.Q. and L.R.H., L.L.J. participated in the discussions. All authors contributed to the interpretation of the work and the writing of the manuscript.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, L., Luo, RH., Liu, L. et al. Double-passage ground-state cooling induced by quantum interference in the hybrid optomechanical system. Sci Rep 8, 14276 (2018). https://doi.org/10.1038/s41598-018-32719-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-32719-1
Keywords
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.