Abstract
Measurements are crucial in quantum mechanics, for fundamental research as well as for applicative fields like quantum metrology, quantum-enhanced measurements and other quantum technologies. In the recent years, weak-interaction-based protocols like Weak Measurements and Protective Measurements have been experimentally realized, showing peculiar features leading to surprising advantages in several different applications. In this work we analyze the validity range for such measurement protocols, that is, how the interaction strength affects the weak value extraction, by measuring different polarization weak values on heralded single photons. We show that, even in the weak interaction regime, the coupling intensity limits the range of weak values achievable, setting a threshold on the signal amplification effect exploited in many weak measurement based experiments.
Similar content being viewed by others
Introduction
The fundamental role of measurement in quantum mechanics is undisputed1, since it is the process in which some of the distinctive traits of the quantum world with respect to the classical one appear: e.g., the fact that quantum states collapse in a specific eigenstate of the observable (corresponding to the measured eigenvalue) when a strong measurement (described by a projection operator) is performed, causing the impossibility to measure non-commuting observables on the same particle.
However, in recent years a new paradigm of quantum measurement emerged, in which the coupling strength between the measured quantum state and the measurement system is weak enough to prevent the wave function collapse (at the cost of extracting only a small amount of information from a single measurement). It is the case of Weak Measurements (WMs), introduced in2,3 and firstly realized in4,5,6, and Protective Measurements (PMs), originally proposed within the debate on the reality of the wave function7 and recently realized for the first time8.
WMs can give rise to anomalous (imaginary and/or unbounded) values, whose real part is regarded as a conditional average of the observable in the zero-disturbance limit9, while the imaginary one is related to the disturbance of the measuring pointer during the measurement10. Beyond having inspired a significant analysis of the meaning of quantum measurement11,12,13,14,15,16,17,18, they have been used both to address foundational problems19, like macrorealism20,21,22 and contextuality23,24,25, and as a novel, impressive tool for quantum metrology and related quantum technologies allowing high-precision measurements (at least in presence of specific noises26,27), as the tiny spin Hall effect6 or small beam deflections28,29,30,31 and characterization of quantum states32,33. Furthermore, the absence of wave function collapse in WMs allows performing sequential measurements of even non-commuting observables on the same particle34,35,36,37, a task forbidden within the strong measurement framework in quantum mechanics.
On the other hand, PMs combine the weak interaction typical of WMs with some protection mechanism preserving the initial state from decoherence. Although a very controversial and debated topic from the foundational perspective38,39,40,41,42,43,44,45,46,47,48, PMs have demonstrated unprecedented measurement capability, allowing to extract the quantum expectation value of an observable in a single measurement on a single (protected) particle8, a task usually forbidden in quantum mechanics.
Both of these protocols require a von Neumann interaction with a very weak coupling between the observable to be measured and the pointer observable, rising the issue of when the regime of weak interaction approximation can be considered valid49,50. For instance, this is of the utmost relevance specially when dealing with anomalous weak values, for which the weakness of the von Neumann interaction is crucial for the reliability of the measurement, giving rise to a signal amplification effect already demonstrated in several experiments6,26,27,28,29,30,31.
Up to now, a generic theoretical discussion of this point has been carried out in51,52,53,54,55,56,57,58,59, while a few papers60,61,62,63,64,65 have afforded an experimental investigation of this issue for specific physical systems. In this work we aim at investigating the specific case of polarization weak measurements, both for its widespread application66,67,68,69,70 and as an emblematic example of general considerations. For this purpose, we have realized a single-photon-based experiment studying the response of the weak value measurement process in different conditions and observing, for a given interaction strength, the limits in which the expected weak value can be accurately extracted. Up to our knowledge, this is the first time for such an experiment to be run at the single particle level, the regime which WMs really belong to.
We show how the von Neumann coupling intensity intrinsically provides some boundaries on the range of weak values that one is able to determine without abandoning the weak interaction approximation, setting, as a consequence, a threshold on the signal amplification effect mentioned above.
Theoretical framework
The weak value of an observable \(\hat{A}\) is defined as \({\langle \hat{A}\rangle }_{w}=\frac{\langle {{\psi }}_{f}|\hat{A}|{{\psi }}_{i}\rangle }{\langle {{\psi }}_{f}|{{\psi }}_{i}\rangle }\), where |ψ i 〉 and |ψ f 〉 are the pre- and post-selected quantum states, respectively2. To extract the weak value, one usually implements a von Neumann indirect measurement coupling the observable of interest (OoI) \(\hat{A}\) to a pointer observable \(\hat{P}\) by means of the unitary operation \(\hat{U}={e}^{-ig\hat{A}\otimes \hat{P}}\), being g the von Neumann coupling strength. After a post-selection onto the state |ψ f 〉, realized by the projector \({\hat{{\rm{\Pi }}}}_{f}=|{{\psi }}_{f}\rangle \langle {{\psi }}_{f}|\), the information on the OoI is obtained by measuring the meter observable \(\hat{Q}\), canonically conjugated with the pointer \(\hat{P}\).
Let us focus on the case of a single qubit, and take as OoI a projection operator of the form \(\hat{{A}}=|{{\rm{\psi }}}_{A}\rangle \langle {\psi }_{A}|\). Considering the initial state \(|{{\rm{\psi }}}_{i}\rangle =|{\psi }_{i}\rangle \otimes |\varphi (q)\rangle \), after the von Neumann interaction and the subsequent post-selection the final state is:
being \(z=\langle {{\psi }}_{f}|{{\psi }}_{i}\rangle \) the internal product between the pre- and post-selected state.
Then, considering as initial condition \(\langle {\varphi }(q)|\hat{Q}|{\varphi }(q)\rangle =0\), the expectation value of the meter observable \(\hat{Q}\) onto the final state can be written as:
In the limit of weak interaction (g → 0), the first perturbative order of the right term in Eq. (2) is:
Hence, restricting ourselves to the case of real weak values, Eq. (2) gives:
showing how the (real) weak value of our OoI A can be obtained by a measurement of the meter Q, canonically conjugated with the pointer P. Going further in the series expansion, one finds that the contribution at the second order is null, so the next non-trivial contribution scales as g3.
In our experiment we extract the weak value of the polarization of single photons, collimated in a Gaussian mode \(|{\varphi }(q)\rangle =\int dqf(q)|q\rangle \), with \(f(q)={\mathrm{(2}\pi {\sigma }^{2})}^{-\frac{1}{4}}\,\exp (-\frac{{q}^{2}}{4{\sigma }^{2}})\). The \(Im[{\langle \hat{A}\rangle }_{w}]=0\) constraint is satisfied by restricting to pre- and post-selected states of the form \(|{{\psi }}_{j}\rangle =\,\cos \,{{\theta }}_{j}|H\rangle +\,\sin \,{{\theta }}_{j}|V\rangle \), where H (V) indicates the horizontal (vertical) polarization and j = i, f the pre- and post-selected state. As pointer observable we choose the transverse momentum \({\hat{P}}_{Q}\) in the direction Q (orthogonal to the photon propagation direction), \(\hat{Q}\) being our meter observable.
Experimental implementation
The single photons exploited in our experiment are produced by a heralded single-photon source71,72 in which a 76 MHz Ti:Sapphire mode-locked laser at 796 nm is frequency doubled via second harmonic generation and then injected into a 5 mm thick LiIO3 nonlinear crystal, generating photon pairs via type-I Parametric Down-Conversion (PDC), as reported in Fig. 1.
The idler photon (λ i = 920 nm) is filtered by an interference filter (IF), coupled to a single mode fiber (SMF) and detected by a silicon single-photon avalanche diode (Si-SPAD). A click from the Si-SPAD heralds the presence of the signal photon (λ s = 702 nm) in the correlated branch. Such photon passes through an IF, then is SMF coupled and addressed, collimated in a Gaussian mode, to the open air path where the WMs take place. We have verified our single photon emission by measuring the antibunching parameter73 of our source, obtaining a value of 0.13(1) without any background/dark-count subtraction.
In such path, the heralded single photon is prepared in the linearly-polarized state \(|{{\psi }}_{i}\rangle =\frac{1}{\sqrt{2}}(|H\rangle +|V\rangle )\) by means of a polarizing beam splitter (PBS) followed by a half wave plate. After the state preparation, the photon encounters a pair of thin birefringent crystals, responsible for the weak interactions. The first birefringent crystal (BC V ) presents an extraordinary (e) optical axis lying in the Y-Z plane, with an angle of π/4 with respect to the Z direction. The spatial walk-off induced on the photons by BC V slightly shifts the vertically-polarized ones, separating horizontal- and vertical-polarization paths along the Y direction and causing the initial state |ψ i 〉 to be affected by a small amount of decoherence. This element realizes the first (weak) interaction \({\hat{U}}_{V}={e}^{-i{a}_{y}{\hat{{\rm{\Pi }}}}_{V}\otimes {\hat{P}}_{y}}\), coupling the observable under test (i.e. the vertical polarization \({\hat{{\rm{\Pi }}}}_{V}=|V\rangle \langle V|)\) to the pointer observable, the transverse momentum along the Y direction \({\hat{P}}_{y}\).
Then, the photon goes through the second birefringent crystal (BC H ), identical to the first one, but with the e-axis lying in the X-Z plane. Here, the photons experiencing the spatial walk-off are the horizontally-polarized ones. They are shifted along the X direction and the initial polarization state undergoes the same decoherence induced by the passage in BC V . This way, the second (weak) interaction \({\hat{U}}_{H}={e}^{-i{a}_{x}{\hat{{\rm{\Pi }}}}_{H}\otimes {\hat{P}}_{x}}\) occurs. This configuration allows measuring simultaneously the weak values of the two orthogonal polarizations \({\hat{{\rm{\Pi }}}}_{V}\) and \({\hat{{\rm{\Pi }}}}_{H}\), at the same time self-compensating the unwanted temporal walk-off induced by the two interactions.
After the two birefringent crystals, the photon undergoes the postselection, that is, a projection onto the final state |ψ f 〉 realized by a half wave plate followed by a PBS.
The final photon detection is performed by a spatial resolving single-photon detector prototype, i.e. a two-dimensional array made of 32 × 32 “smart pixels” (each hosting a SPAD detector with dedicated front-end electronics for counting and timing single photons) operating in parallel with a global shutter readout74. Each count by the Si-SPAD on the heralding arm triggers a 6 ns detection window in each pixel of the SPAD array, in order to heavily decrease the dark count rate and improve the signal-to-noise ratio.
We perform two different acquisitions, respectively with 1 mm and 2.5 mm thick birefringent crystals, in order to change the coupling strength of the weak interactions experienced by the single photons. In each acquisition, we variate the postselection state and measure different weak values, observing the behaviour of the meter variables with respect to the weak values theoretically predicted.
Results and Conclusions
For each pair of birefringent crystals, we perform an initial system calibration to determine the von Neumann coupling intensity g, obtaining for the 1-mm long crystals a x = a y = 0.7 pixels (px), while a x = 1.9 px and a y = 1.7 px for the 2.5-mm long ones (the small discrepancy between a x and a y is due to a slight mismatch in the birefringent crystals cut). Considering that our single photons are collimated in a Gaussian distribution whose width parameter is σ = 4.3 px, the two birefringent crystal pairs induce respectively an interaction strength of \({g}_{x}={g}_{y}={a}_{y}/\sigma \simeq 0.16\) and \({g}_{y}={a}_{y}/\sigma \simeq 0.40\) and \({g}_{x}={a}_{x}/\sigma \simeq 0.45\). These conditions should still lie within the weak interaction regime, since for all of them \({g}^{2}\ll 1\).
The results obtained with the 1-mm and 2.5-mm birefringent crystal pairs are reported in Figs 2 and 3, respectively. In each of these figures, plots (a) and (b) report the behavior of the meter observables \(\langle \hat{X}\rangle \) and \(\langle \hat{Y}\rangle \) with respect to the theoretical weak values associated to them (\({\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w}\) and \({\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w}\), respectively). The orange (purple) dots are the measured values of \(\langle \hat{X}\rangle \) (\(\langle \hat{Y}\rangle \)), the solid curve represents the exact solution of Eq. (2) while the dotted line and the dashed curve indicate respectively the first order approximation, corresponding to the weak value \({\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w}\) (\({\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w}\)), and the third order one in the \({g}^{2}\ll 1\) limit (we remind the reader that the second order approximation gives null contribution).
As visible in Fig. 2, obtained in the condition \(g\simeq 0.16\) with the 1 mm birefringent crystals, the weak value approximation is valid for a good range of anomalous values, that is, for \({\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w},{\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w}\in [-\mathrm{1.5,}\,2.5]\) (region I). Outside this interval, the data start following the third order approximation and the exact solution, almost indistinguishable in the investigated range (region II). This means that, outside region I, a bias begins to affect our weak value estimation.
The situation becomes different when we switch to the 2.5-mm long BC H and BC V , increasing the interaction strength almost to the border of the weak interaction regime. By looking at Fig. 3, we can identify three regions: region I, corresponding to \({\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w},{\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w}\in [-\mathrm{0.7,}\,1.7]\), for which the meter observables still follow the weak value approximation; region II, for \({\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w},{\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w}\in [-\mathrm{1.2,}-0.7]\vee \mathrm{[1.7},\,\mathrm{2.2]}\), in which the third order approximation (dashed line) is still valid; region III (absent in Fig. 2), corresponding to \({\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w},{\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w} < -1.2\vee {\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w},{\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w} > \,2.2\), in which the exact solution assumes a quasi-asymptotic form and both approximations fail. In this last region, our meter observables \(\langle \hat{X}\rangle \) and \(\langle \hat{Y}\rangle \) remain basically constant with respect to \({\langle {\hat{{\rm{\Pi }}}}_{H}\rangle }_{w}\) and \({\langle {\hat{{\rm{\Pi }}}}_{V}\rangle }_{w}\), hence it is not possible anymore to extract the weak value.
In summary, while in region I in principle one can safely estimate the weak value, in region II the bias due to the finite interaction intensity already affects such estimation, completely forbidding it in region III. This means that the signal amplification effect exploited in many WM-based experiments6,26,27,28,29,30,31 is actually limited to a certain range of weak values, determined by the parameter to be evaluated, i.e. the interaction intensity g, and indeed these results were used for choosing the settings of refs22,24,36. Outside of such interval, the weak value approximation can no longer be considered valid, forbidding any accurate weak value measurement and, as a consequence, leading to an unfaithful g extraction due to biased signal amplification.
In the end, we experimentally investigated the limits of WMs, observing how, even in the weak interaction regime, the value of g determines the range of weak values that one is able to extract, putting a threshold to the signal amplification effect6,26,27,28,29,30,31 typical of WMs. From our data it results evident that even a very weak coupling, satisfying the constraint \({g}^{2}\ll 1\), could lead to a bias in the weak value measurement in the case of strongly anomalous values. This means that, to determine an unknown weak coupling intensity exploiting the signal amplification mentioned before, we have to be sure not to cross the borders of the first order solution of Eq. (2). Supposing of not having any “a priori” information on g, the only robust strategy to do so is to perform a wide range of measurements for different weak values until the same picture reported in Figs 2 and 3 appears, and then pick only the values belonging to the weak approximation region.
Giving a deeper insight on weak value measurements and their properties, our results pave the way to their widespread diffusion in several applicative fields, e.g. quantum metrology, quantum-enhanced measurement and related quantum technologies.
References
Genovese, M. Interpretations of Quantum Mechanics and Measurement Problem. Adv. Sci. Lett. 3, 244 (2010).
Aharonov, Y., Albert, D. Z. & Vaidman, L. How the result of a measurement of a component of the spin of a spin-1/2 particle can turn out to be 100. Phys. Rev. Lett. 60, 1351–1354 (1988).
Tamir, B. & Cohen, E. Introduction to Weak Measurements and Weak Values. Quanta 2, 7–17 (2013).
Ritchie, N. W. M., Story, J. G. & Hulet, R. G. Realization of a measurement of a “weak value”. Phys. Rev. Lett. 66, 1107–1110 (1991).
Pryde, G. J., O’Brien, J. L., White, A. G., Ralph, T. C. & Wiseman, H. M. Measurement of quantum weak values of photon polarization. Phys. Rev. Lett. 94, 220405 (2005).
Hosten, O. & Kwiat, P. Observation of the Spin Hall Effect of Light via Weak Measurements. Science 319, 787–790 (2008).
Aharonov, Y. & Vaidman, L. Measurement of the Schrödinger Wave of a Single Particle. Phys. Lett. A 178, 38 (1993).
Piacentini, F. et al. Determining the quantum expectation value by measuring a single photon. Nat. Phys. 13, 1191–1194 (2017).
Dressel, J., Agarwal, S. & Jordan, A. N. Contextual Values of Observables in Quantum Measurements. Phys. Rev. Lett. 104, 240401 (2010).
Dressel, J. & Jordan, A. N. Significance of the imaginary part of the weak value. Phys. Rev. A 85, 012107 (2012).
Vaidman, L. Weak value controversy. Phil. Trans. A, https://doi.org/10.1098/rsta.2016.0395 (2017).
Hall, M. J. W., Pati, A. K. & Wu, J. Products of weak values: Uncertainty relations, complementarity, and incompatibility. Phys. Rev. A 93, 052118 (2016).
Diosi, L. Structural features of sequential weak measurements. Phys. Rev. A 94, 010103 (2016).
Vaidman, L. et al. Weak value beyond conditional expectation value of the pointer readings. Phys. Rev. A 96, 032114 (2017).
Wang, Y., Hou, J., Qi, X. Quantum correlation based on weak measurements. Int. J. of Quant. Inf. https://doi.org/10.1142/S0219749917500411 (2017).
Aharonov, Y., Cohen, E. & Elitzur, A. C. Foundations and applications of weak quantum measurements. Phys. Rev. A 89, 052105 (2014).
Aharonov, Y., Cohen, E. & Elitzur, A. C. Can a future choice affect a past measurements outcome? Ann. of Phys. 355, 258–268 (2015).
Oreshkov, O. & Brun, T. A. Weak Measurements Are Universal. Phys. Rev. Lett. 95, 110409 (2005).
Aharonov, Y., Botero, A., Popescu, S., Reznik, B. & Tollaksen, J. Revisiting Hardy’s paradox: counterfactual statements, real measurements, entanglement and weak values. Phys. Lett. A 301, 130–138 (2002).
Williams, N. S. & Jordan, A. N. Weak Values and the Leggett-Garg Inequality in Solid-State Qubits. Phys. Rev. Lett. 100, 026804 (2008).
Goggin, M. E. et al. Violation of the Leggett-Garg inequality with weak measurements of photons. Proc. Natl. Acad. Sci. USA 108, 1256–1261 (2011).
Avella, A. et al. Anomalous Weak Values and the Violation of a Multiple-measurement Leggett-Garg Inequality. Phys. Rev. A 96, 052123 (2017).
Pusey, M. Anomalous Weak Values Are Proofs of Contextuality. Phys. Rev. Lett. 113, 200401 (2014).
Piacentini, F. et al. Experiment Investigating the Connection between Weak Values and Contextuality. Phys. Rev. Lett. 116, 180401 (2016).
Waegell, M. et al. Confined Contextuality in Neutron Interferometry: Observing the Quantum Pigeonhole Effect. Phys. Rev. A 96, 052131 (2017).
Dressel, J., Malik, M., Miatto, F. M., Jordan, A. N. & Boyd, R. W. Colloquium: Understanding quantum weak values: Basics and applications. Rev. Mod. Phys. 86, 307–316 (2014).
Hallaji, M., Feizpour, A., Dmochowski, G., Sinclair, J. & Steinberg, A. M. Weak-value amplification of the nonlinear effect of a single photon. Nat. Phys. 13, 540–544 (2017).
Resch, K. J. Amplifying a Tiny Optical Effect. Science 319, 733–734 (2008).
Dixon, P. B., Starling, D. J., Jordan, A. N. & Howell, J. C. Ultrasensitive Beam Deflection Measurement via Interferometric Weak Value Amplification. Phys. Rev. Lett. 102, 173601 (2009).
Hogan, J. M. et al. Precision angle sensor using an optical lever inside a Sagnac interferometer. Opt. Lett. 36, 1698 (2011).
Magana-Loaiza, O. S., Mirhosseini, M., Rodenburg, B. & Boyd, R. W. Amplification of Angular Rotations Using Weak Measurements. Phys. Rev. Lett. 112, 200401 (2014).
Salvail, J. Z. et al. Full characterization of polarization states of light via direct measurement. Nat. Phot. 7, 316 (2013).
Lundeen, J. S., Sutherland, B., Patel, A., Stewart, C. & Bamber, C. Direct measurement of the quantum wavefunction. Nature 474, 188 (2011).
Mitchison, G., Jozsa, R. & Popescu, S. Sequential weak measurement. Phys. Rev. A 76, 062105 (2007).
Thekkadath, G. S. et al. Direct measurement of the density matrix of a quantum system. Phys. Rev. Lett. 117, 120401 (2016).
Piacentini, F. et al. Measuring Incompatible Observables by Exploiting Sequential Weak Values. Phys. Rev. Lett. 117, 170402 (2016).
Putz, G., Barnea, T. J., Gisin, N. & Martin, A. Experimental weak measurement of two non-commuting observables. arXiv:1610.04464 (2016).
Rovelli, C. Comment on “Meaning of the wave function”. Phys. Rev. A 50, 2788–2792 (1994).
Unruh, W. G. Reality and measurement of the wave function. Phys. Rev. A 50, 882–887 (1994).
D’Ariano, G. M. & Yuen, H. P. Impossibility of measuring the wave function of a single quantum system. Phys. Rev. Lett. 76, 2832–2835 (1996).
Aharonov, Y., Anandan, J. & Vaidman, L. The Meaning of Protective Measurements. Found. Phys. 26, 117–126 (1996).
Dass, N. H. & Qureshi, T. Critique of protective measurements. Phys. Rev. A 59, 2590–2601 (1999).
Uffink, J. How to protect the interpretation of the wave function against protective measurements. Phys. Rev. A 60, 3474–3481 (1999).
Gao, S. Protective Measurement and Quantum Reality (Cambridge University Press, UK, 2015).
Aharonov, Y., Englert, B. G. & Scully, M. O. Protective measurements and Bohm trajectories. Phys. Lett. A 263, 137–146 (1999).
Diosi, L. Determination of the stationary basis from protective measurement on a single system. In [44], pp. 63–67 (2015).
Schlosshauer, M. Measuring the quantum state of a single system with minimum state disturbance. Phys. Rev. A 93, 012115 (2016).
Aharonov, Y. & Vaidman, L. Protective Measurements of Two-State Vectors. In Potentiality, Entanglement and Passion-at-a-Distance, eds/ R. S. Cohen, M. Horne and J. Stachel, BSPS1–8, quant-ph/9602009 (Kluwer, 1997).
Shikano, Y. & Hosoya, A. Weak values with decoherence. Journal of Physics A 43, 025304 (2010).
Kofman, A. G., Ashhab, S. & Nori, F. Nonperturbative theory of weak pre- and post-selected measurements. Physics Reports 520, 43–133 (2012).
Wiseman, H. M. Weak values, quantum trajectories, and the cavity-QED experiment on wave-particle correlation. Phys. Rev. A 65, 032111 (2002).
Geszti, T. Postselected weak measurement beyond the weak value. Phys. Rev. A 81, 044102 (2010).
Parks, A. D. & Gray, J. E. Variance control in weak-value measurement pointers. Phys. Rev. A 84, 012116 (2011).
Di Lorenzo, A. Full counting statistics of weak-value measurement. Phys. Rev. A 85, 032106 (2012).
Susa, Y., Shikano, Y. & Hosoya, A. Optimal probe wave function of weak-value amplification. Phys. Rev. A 85, 052110 (2012).
Wu, S. & Zukowski, M. Feasible Optical Weak Measurements of Complementary Observables via a Single Hamiltonian. Phys. Rev. Lett. 108, 080403 (2012).
Dressel, J., Lyons, K., Jordan, A. N., Graham, T. M. & Kwiat, P. G. Strengthening weak-value amplification with recycled photons. Phys. Rev. A 88, 023821 (2013).
Dressel, J. & Jordan, A. N. Weak Values are Universal in Von Neumann Measurements. Phys. Rev. Lett. 109, 230402 (2012).
Kumari, A., Kumar Pan, A. & Panigrahi, P. K. Joint weak value for all order coupling using continuous variable and qubit probe. Eur. Phys. J. D 71, 275 (2017).
Martínez-Rincón, J., Mullarkey, C. A., Viza, G. I., Liu, W.-T. & Howell, J. C. Ultrasensitive inverse weak-value tilt meter. Optics Letters 42, 2479–2482 (2017).
Starling, D. J., Ben Dixon, P., Williams, N. S., Jordan, A. N. & Howell, J. C. Continuous phase amplification with a Sagnac interferometer. Phys. Rev. A 82, 011802(R) (2010).
Xu, X.-Y. et al. Phase Estimation with Weak Measurement Using a White Light Source. Phys. Rev. Lett. 111, 033604 (2013).
Martínez-Rincón, J., Liu, W.-T., Viza, G. I. & Howell, J. C. Can Anomalous Amplification be Attained without Postselection? Phys. Rev. Lett. 116, 100803 (2016).
Martínez-Rincón, J., Chen, Z. & Howell, J. C. Practical advantages of almost-balanced-weak-value metrological techniques. Phys. Rev. A 95, 063804 (2017).
Liu, W.-T., Martínez-Rincón, J., Viza, G. I. & Howell, J. C. Anomalous Amplification of a Homodyne signal via Almost-Balanced Weak Values. Opt. Lett. 42, 903–906 (2017).
Cho, Y.-W., Lim, H.-T., Ra, Y.-S. & Kim, Y.-H. Weak value measurement with an incoherent measuring device. New Journal of Physics 12, 023036 (2010).
Zhou, X., Ling, X., Zhang, Z., Luo, H. & Wen, S. Observation of Spin Hall Effect in Photon Tunneling via Weak Measurements. Scientific Reports 4, 7388 (2014).
Zhou, X., Xiao, Z., Luo, H. & Wen, S. Experimental observation of the spin Hall effect of light on a nanometal film via weak measurements. Phys. Rev. A 85, 043809 (2012).
Jayaswal, G., Mistura, G. & Merano, M. Observing angular deviations in light beam reflection via weak measurements. Opt. Lett. 39, 6257 (2014).
Fang, C., Huang, J.-Z., Yu, Y., Li, Q. & Zeng, G. Ultra-small time-delay estimation via a weak measurement technique with post-selection. J. Phys. B: At. Mol. Opt. Phys. 49, 175501 (2016).
Castelletto, S., Degiovanni, I. P., Schettini, V. & Migdall, A. Spatial and spectral mode selection of heralded single photons from pulsed parametric down-conversion. Opt. Expr. 13(18), 6709 (2005).
Brida, G. et al. Improved implementation of the AlickiVan Ryn nonclassicality test for a single particle using Si detectors. Phys. Rev. A 79, 044102 (2009).
Grangier, P., Roger, G. & Aspect, A. Experimental Evidence for a Photon Anticorrelation Effect on a Beam Splitter: A New Light on Single-Photon Interferences. Eur. Phys. Lett. 1, 173 (1986).
Villa, F. et al. CMOS Imager With 1024 SPADs and TDCs for Single-Photon Timing and 3-D Time-of-Flight. IEEE J. Sel. Top. Quantum Electron. 20, 3804810 (2014).
Acknowledgements
This work has been supported by EMPIR-14IND05 “MIQC2” and EMPIR-17FUN01 “Become” (the EMPIR initiative is co-funded by the EU H2020 and the EMPIR Participating States) and the MIUR Progetto Premiale 2014 “Q-SecGroundSpace”. We thank Dr. Mattia P. Levi for contributing to the experimental setup implementation and data analysis.
Author information
Authors and Affiliations
Contributions
I.P.D., M. Gram and M. Gen (responsible of the laboratories) planned the experiment. The experimental realization was achieved (supervised by I.P.D., G.B., M. Gram and M. Gen) by F.P. (leading role) and A.A. The camera was developed and optimized for this experiment by R.L., F.V., A.T. The manuscript was prepared with inputs by all the authors. They also had a fruitful systematic discussion on the progress of the work.
Corresponding author
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Piacentini, F., Avella, A., Gramegna, M. et al. Investigating the Effects of the Interaction Intensity in a Weak Measurement. Sci Rep 8, 6959 (2018). https://doi.org/10.1038/s41598-018-25156-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-25156-7
This article is cited by
-
Extraction of weak values in the process of retrieving quantum entanglement state
Optoelectronics Letters (2024)
-
Quantum-coherence-free precision metrology by means of difference-signal amplification
Scientific Reports (2023)
-
Anomalous weak values via a single photon detection
Light: Science & Applications (2021)
-
Weak-to-strong transition of quantum measurement in a trapped-ion system
Nature Physics (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.