Abstract
We introduce a magnetic-flux-tunable phase shifter for propagating microwave photons, based on three equidistant superconducting quantum interference devices (SQUIDs) on a transmission line. We experimentally implement the phase shifter and demonstrate that it produces a broad range of phase shifts and full transmission within the experimental uncertainty. Together with previously demonstrated beam splitters, this phase shifter can be utilized to implement arbitrary single-qubit gates for qubits based on propagating microwave photons. These results complement previous demonstrations of on-demand single-photon sources and detectors, and hence assist in the pursuit of an all-microwave quantum computer based on propagating photons.
Similar content being viewed by others
Introduction
Since its initial theoretical considerations in the 1980s1, quantum computing has been an active area of research thanks to its envisioned superior performance in certain computational problems2,3,4. However, the realization of a high-fidelity large-scale qubit register5 remains a major challenge. Among many proposals6, propagating photons constitute an interesting candidate for a quantum register since they exhibit weak decoherence7 and photons can be directly used for fast and secure communication8.
In addition to a universal set of quantum gates9, a photonic quantum computer calls for high-fidelity single-photon sources and detectors for qubit initialization and readout. In the optical regime, on-demand single-photon sources have reached 65% efficiencies10,11 (see also refs12 and13) and single-photon detectors are commercially available. Traditionally, tunable optical phase shifters have been slow to operate14,15,16, but recent electro-optical phase shifters17 have potential for 100-GHz operation18. However, large bias voltages or relatively long electrodes are needed for reasonable phase shifts19,20, hindering the scalability of the optical quantum computer. Furthermore, optical photons interact relatively weakly with nonlinear matter, making it very challenging to implement deterministic two-qubit gates. Measurement-based gates can provide an effective nonlinearity, but at the expense of adding severe overheads21,22,23,24.
Recent years have witnessed great progress in the implementation of high-fidelity superconducting qubits operating at microwave frequencies5,25,26,27,28,29,30,31,32. These nonlinear circuit elements can be engineered to interact very strongly33 with single photons34,35,36, providing opportunities for introducing deterministic photon–photon interactions37. In practice, on-demand single-photon sources in the microwave regime have already reached above 80% efficiencies38,39,40, thus surpassing the optical sources. Qubit-based single-photon microwave detectors41,42,43,44,45,46,47,48,49,50 have recently reached a quantum efficiency of 66%51 and calorimetric detectors52,53 have taken a leap towards the single-photon regime54. Owing to fully compatible fabrication techniques, all these components can be conveniently integrated on the same chip35, thus rendering propagating microwave photons an attractive alternative to optical wavelengths in realizing photonic quantum computing and communications.
However, no quickly tunable, compact, and high-fidelity phase shifter for propagating microwave photons has been demonstrated to date. A transmission line with a current-tunable kinetic inductance can be used as a phase shifter55,56, but it introduces significant reflections owing to mismatched characteristic impedances. Very recently, a tunable on-chip phase shifter was demonstrated57 with greatly improved impedance matching, but it still exhibits several decibels of loss and requires a microwave pump tone.
In addition to the implementation of photonic quantum gates, tunable phase shifters are useful in the on-chip integration of the control and measurement devices of a superconducting quantum computer. They may, for example, be used to tune the phase of on-chip coherent microwave sources58, thus possibly providing access to a universal set of single-qubit gates with a single off-chip source.
In this Report, we demonstrate a compact phase shifter based on three equidistant superconducting quantum interference devices (SQUIDs) interrupting a transmission line. We show that if the fluxes are chosen properly, the system exhibits full transmission with flux-tunable phase shift. At 6.3-GHz signal frequency, we experimentally obtain a phase shift range of size 3π/8, which is expected to increase with optimization of the sample parameters. Hence, our phase shifter conveniently expands the toolbox of superconducting quantum technology. In principle, the SQUIDs can be tuned in situ at timescales set by their plasma frequency which is typically higher than 10 GHz. Importantly, the phase shifter does not require a pump tone to operate.
Results
First, we present an analytical expression for the transmission coefficient of the SQUID-based phase shifter. These results may be obtained using both classical circuit analysis and the quantum network theory59 which we employ in our derivation given in the Supplemental Material. We model the three SQUIDs forming the phase shifter as linear LC oscillators (see Fig. 1(a)), which is justified by the fact that the electric current induced by the microwaves is well below the typical critical currents of the SQUIDs which are tuned sufficiently far away from half integer flux values. The input current to the sample is of the order of a nanoampere, whereas the zero-flux critical current of the junctions is of the order of a microampere. Furthermore, we estimate from circuit simulations that the external quality factor of the SQUID chain is less than 10, and thus the linearity is well justified60.
The Josephson inductances of the SQUIDs are given by
where Φ0 is the magnetic flux quantum, I c,i and Φ i are the zero-flux single-junction critical current and the magnetic flux threading the ith SQUID. There is also parallel capacitance, C, in the model arising from the junction capacitance and possible stray capacitances between the different sides of the SQUID. For simplicity, we have assumed that all Josephson junctions are identical and that the loop inductances of the SQUIDs are negligible.
We tune the inductances of the SQUIDs at the left and right ends of the chain to be equal, L 1. The middle SQUID inductance is denoted by L 2. Dissipation is negligible in the short superconducting waveguides we consider since quality factors over a million have been demonstrated with aluminum resonators61. Hence, we do not account for dissipation in our model. After a straightforward calculation, we find that the forward transmission coefficient for the voltage through the SQUID chain, S 21(ω), is given by
Here, Z 0 is the characteristic impedance of the transmission line, ω is the angular frequency of the incoming photons, φ = ωd/v is the phase shift due to a uniform transmission line of length d, and v is the speed of the wave in the transmission line.
If we define a free real-valued parameter θ, and restrict our attention to combinations of L 1 and L 2 that satisfy the ansatz
and
we find that equation (2) reduces into
Thus choosing L 1 and L 2 according to this ansatz leads to full transmission (|S 21| = 1) and the parameter θ to be the excess phase shift due to the SQUIDs. In practice, the achievable range of phase shifts is determined by the available values for the inductances and the employed photon frequency. For some combinations of ω and θ, equations (3) and (4) require negative inductances, and thus full transmission cannot be achieved. However, this limitation may be overcome using more than three SQUIDs in the phase shifter. A connection of N phase shifters in series trivially increases the range of tunability by a factor of N. In practice, some of the SQUIDs from such a long chain can be dropped, but we leave this optimization for future work.
Schematic illustration of our experimental sample realizing the three-SQUID phase shifter is shown in Fig. 1(b). The bonding pads for the center conductor of the waveguide are located near the left and right edges of the chip. Three broadband superconducting transmission lines provide tunable flux biases for each SQUID. The sample is cooled down in a commercial cryostat with a base temperature of 13 mK and measured according to the scheme presented in Fig. 1(b). We measure the transmission coefficient with a vector network analyzer operating in the low-power regime where the response is linear.
We normalize the measured transmission coefficient by a reference signal, for which all three SQUIDs are biased at an integer multiple of a flux quantum. This reference point is chosen since the SQUID inductances are minimized here, and hence they have a minimal effect on the transmitted signal. Namely, the zero-flux critical current of each SQUID is of the order 1 μA, resulting in an impedance iωL k ≈ i × 7Ω at the frequencies of interest. Hence, the estimated transmission amplitude for the circuit at the reference point is sufficiently close to unity, |S 21| ≈ 0.98.
The normalized magnitude and the phase of the measured transmission coefficient at 6.3-GHz frequency together with the corresponding theoretical predictions from equation (2) are shown in Fig. 2(a–d). We observe nearly full transmission over a wide range of flux values. Full transmission is obtained in the theoretical calculations along the solid line in Fig. 2(b). Thus we show in Fig. 2(e) the normalized magnitude and the phase of the transmission coefficient along this line. We clearly achieve a tunable phase shift with essentially unit transmission. The small discrepancy between the observed and the theoretical phase shifts is attributed to slight deviations from the assumption in the theory that the zero-flux critical currents of the side SQUIDs are equal. We note that the critical current of the side SQUIDs is roughly 90 nA for flux Φ1/Φ0 = 0.54, and hence the approximation of replacing the SQUIDs by linear LC oscillators holds along the full transmission curve.
To obtain insight on the operational characteristics of the phase shifter at different signal frequencies, we numerically solve from equations (3) and (4) the values of θ for which the inductances are in the experimentally achievable range for the realized sample. The results shown in Fig. 3 indicate that broad ranges of phase shifts are achievable in wide frequency bands. However, there are frequencies, for which all feasible inductance values lead to some reflections. Fortunately, these forbidden frequencies depend on the distance between the SQUIDs, and hence can be chosen in the fabrication.
Discussion
In summary, we demonstrated theoretically and experimentally that a transmission line interrupted by three SQUIDs exhibits full microwave transmission with a tunable phase shift. We measured a tunability of 3π/8 at 6.3-GHz signal frequency and showed that this is in good agreement with the theory. Note that, in principle, the phase shifter works also if it is implemented with bulk components, e.g., variable inductors and coaxial cables, and operated at room temperature. However, there are many different phase shifter realizations available for room temperature applications62,63,64,65,66, and hence we choose to focus on the on-chip superconducting phase shifter owing to its direct applicability in quantum computing and technology. Our phase shifter thus opens horizons for future realizations of arbitrary single-qubit gates for propagating microwave photons, if integrated with nontunable beam splitters35. Another interesting future direction is the extension of this work to non-linear phase shifters and entangling two-qubit gates, which together with the single-qubit gates, can possibly be used to implement arbitrary many-qubit gates67.
The realization of a many-qubit quantum processor based on propagating microwave photons remains a challenge in the field of quantum technology. In the short term, implementation of arbitrary tunable single-qubit gates and integrated circuits including sources and detectors on the same chip seems plausible. Extension of the three-SQUID design, used here as a tunable phase shifter, to five or seven SQUIDs may allow an even broader range of phase shifts and signal frequencies. As a first step towards this goal, we aim to measure the three-SQUID phase shifter at multiple frequencies to demonstrate a much broader range of achievable phase shifts.
Methods
Sample fabrication
The sample is fabricated on an oxidized silicon substrate using standard lithographic techniques. The niobium ground plane and the flux bias lines are fabricated with optical lithography and the center conductor, along with the SQUIDs, are fabricated using electron beam lithography. The Al/AlOx/Al tunnel junctions are evaporated simultaneously with the center conductor to guarantee galvanic connection.
Inductance matrix
We bias the SQUIDs with direct-current (dc) sources. Due to vanishing impedance of superconductors at dc, the bias current does not necessarily flow to the ground via the seemingly shortest available path. We observe this as significant cross coupling between the flux bias lines, i.e., applying current to one flux bias line changes the flux threading through all three SQUIDs. However, we must be able to address individual SQUIDs in the experiments. Hence, we quantify the cross coupling by measuring the inductance matrix.
To this end, we attach a superconducting solenoid to the middle of the outer surface of the sample holder, but inside the magnetic shield. The solenoid is used to provide a nonuniform flux bias to all three SQUIDs. If we measure the transmission through the phase shifter as a function of the current through the solenoid, we observe dips in the transmission at certain currents. Due to the nonuniformity, the dips occur at three distinct periods. Since the solenoid is attached to the middle of the sample holder, and thus to the middle of the sample, we expect the SQUID at the middle of the chain to have the shortest period. The periods of the remaining two SQUIDs can be conveniently determined after having measured the full inductance matrix between the on-chip SQUID coils and loops.
Applying current through one of the flux bias lines causes the dips in transmission shift to new solenoid current values. Measuring this shift for each SQUID and flux bias line allows us to determine the elements of the inductance matrix. We find the elements to be
with 1σ uncertainties
With the inductance matrix we can convert the desired magnetic fluxes threading the left (Φl), middle (Φm), and right (Φr) SQUIDs to the currents applied to the left (I l), middle (I m), and right (I r) flux bias lines as
Here, the positions refer to the positions of the SQUIDs and the flux bias lines in Fig. 1(b).
Data availability
The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.
References
Feynman, R. P. Simulating physics with computers. Int. J. Theor. Phys. 21, 467 (1982).
Simon, D. R. On the power of quantum computation. SIAM J. Comput. 26, 1474 (1997).
Childs, A. M. & Van Dam, W. Quantum algorithms for algebraic problems. Rev. Mod. Phys. 82, 1 (2010).
Houck, A. A., Türeci, H. E. & Koch, J. On-chip quantum simulation with superconducting circuits. Nature Phys. 8, 292 (2012).
Kelly, J. et al. State preservation by repetitive error detection in a superconducting quantum circuit. Nature 519, 66 (2015).
Ladd, T. D. et al. Quantum computers. Nature 464, 45 (2010).
O’Brien, J. L. Optical quantum computing. Science 318, 1567 (2007).
Bennett, C. H. & Brassard, G. Ieee computer society press. In Proceedings of the IEEE International Conference on Computers, Systems and Signal Processing, Bangalore, India, 175 (IEEE, New York, 1984).
Nielsen, M. A. & Chuang, I. L. Quantum computation and quantum information (Cambridge university press, Cambridge, England, 2000).
Somaschi, N. et al. Near-optimal single-photon sources in the solid state. Nat. Photon. 10, 340 (2016).
Ding, X. et al. On-demand single photons with high extraction efficiency and near-unity indistinguishability from a resonantly driven quantum dot in a micropillar. Phys. Rev. Lett. 116, 020401 (2016).
Lita, A. E., Miller, A. J. & Nam, S. W. Counting near-infrared single-photons with 95% efficiency. Opt. Express 16, 3032 (2008).
Marsili, F. et al. Detecting single infrared photons with 93% system efficiency. Nat. Photon. 7, 210 (2013).
Humphreys, P. C. et al. Strain-optic active control for quantum integrated photonics. Opt. Express 22, 7 (2014).
Matthews, J. C. F., Politi, A., Stefanov, A. & O’Brien, J. L. Manipulation of multiphoton entanglement in waveguide quantum circuits. Nat. Photon. 3, 346 (2009).
Smith, B. J., Kundys, D., Thomas-Peter, N., Smith, P. G. R. & Walmsley, I. A. Phase-controlled integrated photonic quantum circuits. Opt. Express 17, 13516 (2009).
Bonneau, D. et al. Fast path and polarization manipulation of telecom wavelength single photons in lithium niobate waveguide devices. Phys. Rev. Lett. 108, 053601 (2012).
Kanno, A. et al. 120-Gb/s NRZ-DQPSK signal generation by a thin-lithium-niobate-substrate modulator. IEICE Electronics Express 7, 817 (2010).
Wooten, E. L. et al. A review of lithium niobate modulators for fiber-optic communications systems. IEEE J. Sel. Top. Quantum Electron. 6, 69 (2000).
Wang, J. et al. Gallium arsenide (GaAs) quantum photonic waveguide circuits. Opt. Commun. 327, 49 (2014).
Raussendorf, R. & Briegel, H. J. A one-way quantum computer. Phys. Rev. Lett. 86, 5188 (2001).
O’Brien, J. L., Furusawa, A. & Vučković, J. Photonic quantum technologies. Nat. Photon. 3, 687 (2009).
Knill, E., Laflamme, R. & Milburn, G. J. A scheme for efficient quantum computation with linear optics. Nature 409, 46 (2001).
Kok, P. et al. Linear optical quantum computing with photonic qubits. Rev. Mod. Phys. 79, 135 (2007).
Blais, A., Huang, R.-S., Wallraff, A., Girvin, S. & Schoelkopf, R. J. Cavity quantum electrodynamics for superconducting electrical circuits: An architecture for quantum computation. Phys. Rev. A 69, 062320 (2004).
Devoret, M. H. & Schoelkopf, R. J. Superconducting circuits for quantum information: an outlook. Science 339, 1169 (2013).
DiCarlo, L. et al. Preparation and measurement of three-qubit entanglement in a superconducting circuit. Nature 467, 574 (2010).
Wallraff, A. et al. Approaching unit visibility for control of a superconducting qubit with dispersive readout. Phys. Rev. Lett. 95, 060501 (2005).
Chiorescu, I., Nakamura, Y., Harmans, C. M. & Mooij, J. Coherent quantum dynamics of a superconducting flux qubit. Science 299, 1869 (2003).
Bylander, J. et al. Noise spectroscopy through dynamical decoupling with a superconducting flux qubit. Nat. Phys. 7, 565 (2011).
Gustavsson, S. et al. Suppressing relaxation in superconducting qubits by quasiparticle pumping. Science 354, 1573 (2016).
Ofek, N. et al. Extending the lifetime of a quantum bit with error correction in superconducting circuits. Nature 536, 441 (2016).
Niemczyk, T. et al. Circuit quantum electrodynamics in the ultrastrong-coupling regime. Nat. Phys. 6, 772 (2010).
Neumeier, L., Leib, M. & Hartmann, M. J. Single-photon transistor in circuit quantum electrodynamics. Phys. Rev. Lett. 111, 063601 (2013).
Bozyigit, D. et al. Antibunching of microwave-frequency photons observed in correlation measurements using linear detectors. Nature Phys. 7, 154 (2011).
Leib, M. & Hartmann, M. J. Synchronized switching in a josephson junction crystal. Phys. Rev. Lett. 112, 223603 (2014).
Koshino, K., Ishizaka, S. & Nakamura, Y. Deterministic photon-photon √SWAP gate using a Λ system. Phys. Rev. A 82, 010301 (2010).
Houck, A. et al. Generating single microwave photons in a circuit. Nature 449, 328 (2007).
Peng, Z., De Graaf, S., Tsai, J. & Astafiev, O. Tuneable on-demand single-photon source in the microwave range. Nat. Commun. 7, 12588 (2016).
George, R. E. et al. Multiplexing superconducting qubit circuit for single microwave photon generation. J. Low Temp. Phys. 189, 60 (2017).
Romero, G., Garca-Ripoll, J. J. & Solano, E. Photodetection of propagating quantum microwaves in circuit QED. Phys. Scripta 2009, 014004 (2009).
Romero, G., Garca-Ripoll, J. J. & Solano, E. Microwave photon detector in circuit qed. Phys. Rev. Lett. 102, 173602 (2009).
Chen, Y.-F. et al. Microwave photon counter based on josephson junctions. Phys. Rev. Lett. 107, 217401 (2011).
Peropadre, B. et al. Approaching perfect microwave photodetection in circuit qed. Phys. Rev. A 84, 063834 (2011).
Fan, B. et al. Breakdown of the cross-Kerr scheme for photon counting. Phys. Rev. Lett. 110, 053601 (2013).
Hoi, I.-C. et al. Giant cross-Kerr effect for propagating microwaves induced by an artificial atom. Phys. Rev. Lett. 111, 053601 (2013).
Sathyamoorthy, S. R. et al. Quantum nondemolition detection of a propagating microwave photon. Phys. Rev. Lett. 112, 093601 (2014).
Fan, B., Johansson, G., Combes, J., Milburn, G. J. & Stace, T. M. Nonabsorbing high-efficiency counter for itinerant microwave photons. Phys. Rev. B 90, 035132 (2014).
Koshino, K., Inomata, K., Lin, Z., Nakamura, Y. & Yamamoto, T. Theory of microwave single-photon detection using an impedance-matched Λ system. Phys. Rev. A 91, 043805 (2015).
Narla, A. et al. Robust concurrent remote entanglement between two superconducting qubits. Phys. Rev. X 6, 031036 (2016).
Inomata, K. et al. Single microwave-photon detector using an artificial Λ-type three-level system. Nat. Commun. 7, 12303 (2016).
Ullom, J. N. & Bennett, D. A. Review of superconducting transition-edge sensors for x-ray and gamma-ray spectroscopycontribution of a us government agency, not subject to copyright. Supercond. Sci. Technol. 28, 084003 (2015).
Pekola, J. P., Solinas, P., Shnirman, A. & Averin, D. Calorimetric measurement of work in a quantum system. New J. Phys. 15, 115006 (2013).
Govenius, J., Lake, R., Tan, K. & Möttönen, M. Detection of zeptojoule microwave pulses using electrothermal feedback in proximity-induced josephson junctions. Phys. Rev. Lett. 117, 030802 (2016).
Anlage, S., Snortland, H. & Beasley, M. A current controlled variable delay superconducting transmission line. IEEE Trans. Magn. 25, 1388 (1989).
Eom, B. H., Day, P. K., LeDuc, H. G. & Zmuidzinas, J. A wideband, low-noise superconducting amplifier with high dynamic range. Nature Phys. 8, 623 (2012).
Abdo, B., Brink, M. & Chow, J. M. Gyrator operation using Josephson mixers. Phys. Rev. Applied 8, 034009 (2017).
Cassidy, M. et al. Demonstration of an ac josephson junction laser. Science 355, 939 (2017).
Yurke, B. & Denker, J. S. Quantum network theory. Phys. Rev. A 29, 1419 (1984).
Eichler, C. & Wallraff, A. Controlling the dynamic range of a josephson parametric amplifier. EPJ Quantum Technol. 1, 2 (2014).
Megrant, A. et al. Planar superconducting resonators with internal quality factors above one million. Appl. Phys. Lett. 100, 113510 (2012).
Kim, H., Kozyrev, A. B., Karbassi, A. & Van Der Weide, D. Linear tunable phase shifter using a left-handed transmission line. IEEE Microw. Wirel. Compon. Lett. 15, 366 (2005).
Acikel, B., Taylor, T. R., Hansen, P. J., Speck, J. S. & York, R. A. A new high performance phase shifter using Ba x Sr1−x TiO3 thin films. IEEE Microw. Wirel. Compon. Lett. 12, 237 (2002).
Dolfi, D., Labeyrie, M., Joffre, P. & Huignard, J. Liquid crystal microwave phase shifter. Electron. Lett. 29, 926 (1993).
Borgioli, A., Liu, Y., Nagra, A. S. & York, R. A. Low-loss distributed mems phase shifter. IEEE Microw. Guided Wave Lett. 10, 7–9 (2000).
Hord, W., Rosenbaum, F. & Benet, J. Theory and operation of a reciprocal faraday-rotation phase shifter. IEEE Trans. Microw. Theory Techn. 20, 112 (1972).
Möttönen, M., Vartiainen, J. J., Bergholm, V. & Salomaa, M. M. Quantum circuits for general multiqubit gates. Phys. Rev. Lett. 93, 130502 (2004).
Acknowledgements
We wish to thank Matti Partanen for technical assistance, Leif Grönberg for depositing niobium used in this work, and Kazuki Koshino, Scott Glancy, and Dave Rudman for insightful comments on the manuscript. We acknowledge the financial support from European Research Council under Grants No. 278117 (“SINGLEOUT”) and No. 681311 (“QUESS”), Academy of Finland under Grant Nos 251748, 265675, 276528, 284621, 305237, and 308161, Emil Aaltonen Foundation, KAUTE-Foundation, and Finnish Cultural Foundation. We acknowledge the provision of facilities by Aalto University at OtaNano – Micronova Nanofabrication Centre.
Author information
Authors and Affiliations
Contributions
R.K. conducted the experiments, analyzed the data and participated in theoretical analysis and writing the manuscript. T.O. participated in preparing the manuscript. R.E.L. participated in designing the measurement setup and the experimental sample. S.S. participated in designing the sample. K.Y.T. fabricated the sample. J.I.K. and C.B.D. conducted theoretical studies. J.G. participated in designing the measurement setup. M.M. supervised the work and participated in writing of the manuscript.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kokkoniemi, R., Ollikainen, T., Lake, R.E. et al. Flux-tunable phase shifter for microwaves. Sci Rep 7, 14713 (2017). https://doi.org/10.1038/s41598-017-15190-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-15190-2
This article is cited by
-
A low-noise on-chip coherent microwave source
Nature Electronics (2021)
-
Bolometer operating at the threshold for circuit quantum electrodynamics
Nature (2020)
-
Secure quantum remote state preparation of squeezed microwave states
Nature Communications (2019)
-
Nanobolometer with ultralow noise equivalent power
Communications Physics (2019)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.