Abstract
We report a theoretical study on the valley-filter and valley-valve effects in the monolayer graphene system by using electrostatic potentials, which are assumed to be electrically controllable. Based on a lattice model, we find that a single extremely strong electrostatic-potential barrier, with its strength exceeding the hopping energy of electrons, will significantly block one valley but allow the opposite valley flowing in the system, and this is dependent on the sign of the potential barrier as well as the flowing direction of electrons. In a valley-valve device composed of two independent potential barriers, the valley-valve efficiency can even amount to 100% that the electronic current is entirely prohibited or allowed by reversing the sign of one of potential barriers. The physics origin is attributed to the valley mixing effect in the strong potential barrier region. Our findings provide a simple electric way of controlling the valley transport in the monolayer graphene system.
Similar content being viewed by others
Introduction
Recently, the valley transport in 2D graphene-like materials has attracted much attention of researchers, because it is expected that the valley degree of freedom of electrons can exert the same effect as the electron spin in carrying and manipulating information1,2,3. This newly rising discipline is referred to as the valleytronics in a much similar way to spintronics. In graphene, the valley degree of freedom comes from the fact that the six corners of the hexagonal Brillouin zone are divided into two inequivalent groups, labeled as the K or K′ valley. These two valleys are related by the time-reversal symmetry and can be transformed into each other by spatial inversion operation. Due to much momentum difference between the two valleys, the intervalley scattering is suppressed4,5,6,7 in clean graphene samples and valley is largely a conserved quantum number in electron transports.
There were tremendous works devoted to the valleytronics field, especially, after several research groups have measured and confirmed valley currents driven by the Valley Hall effect in the monolayer8 or bilayer graphene9, 10 system. At present, the production and measurement of an imbalance of valley carriers are still the principal tasks in this field, since the valleytronics is still in its infancy. A lot of proposals in the literature were put forward to generate valley-polarized currents by using graphene nanoribbon/nanoconstriction11, 12, electromagnetic or optical field13,14,15,16,17,18,19,20,21, and line defects22,23,24, as well as lattice strain25,26,27,28,29,30,31,32,33,34.
Since graphene has excellent flexibility and the lattice deformation can bring about the opposite pseudo-gauge potential or magnetic field for two valleys34, the lattice strain is an ideal method to affecting the valley-dependent transport of electrons. For example, Settnes et al.35 has recently proposed to use the nanobubble-type lattice deformation in graphene to filtrate and split valleys, and showed that some concrete lattice deformation makes valley polarization of electrons quite high or valley completely splitted in real space. Milovanović and Peeters36 studied the same strain-induced bump structure in a graphene ribbon system and found an effective valley filter phenomenon under some special parameters. Certainly, the accurate control of strains in graphene is a great challenge in order to obtain a special pseudomagnetic field. The ideal way of controlling the valley degree of freedom in experiment should be an electric one like that in spintronics.
Given the fact that the valley in graphene is defined in the momentum space with the electron energy around the Dirac points, one can see that the valley definition is no longer valid if the electron energy is far from the Dirac points. i.e., the valley will be severely mixed when the electron transport occurs at this energy level. According to this inference, we study the possible valley-filter and valley-valve effect in monolayer graphene modulated by extremely strong electrostatic-potential barriers, which are assumed to be constructed by gate voltage. It is shown that the potential barrier almost blocks one valley but allows the opposite valley passing through, and the filtering efficiency is quite high even amounting to 100%. The filtered valley is dependent on the sign of the potential barrier and the transport direction of electrons. It is also found that the two opposite potential barriers can bring about an efficient valley-valve effect similar to the GMR effect in the spintronics field. This method by using the electrostatic potentials to controlling valleys does not involve any external magnetic field or material, and is favorable to experiment observation.
Model and Method
We first consider a simple two-terminal device in Fig. 1(a), where an electrostatic-potential barrier V 0 is constructed in pristine graphene and connects directly with the left and right graphene leads. The barrier length is L and its shape is set as a rectangle one, which does not bring any qualitative effect on our results. Since we focus on the valley filter and valve effects, which are induced by the possible valley-mixing effect in the strong potential barrier, a lattice model is employed to describe the system
where the first term stands for pristine graphene, 〈ij〉 denotes the nearest neighboring sites, \({c}_{i}^{\dagger }({c}_{i})\) is the creation (annihilation) operator at the site i, and V 0 is the on-site energy representing the barrier region, which is assumed controllable by gate voltages. The spin degree of freedom of electrons is omitted here and the graphene leads are absent of any interaction of electrons. The valley-dependent transmission T ττ′ at the Fermi energy E is given by
where τ, τ′(=K, K′) is the K or K′ valley index. T ττ′ stands for the transmission coefficient of the τ′ valley electrons in the left lead that are transformed into the τ valley in the right graphene lead. \({G}^{r}={[E-{H}_{c}-{{\rm{\Sigma }}}_{L}^{r}-{{\rm{\Sigma }}}_{R}^{r}]}^{-1}\) is the retarded Green’s function of the device, and H c is the Hamiltonian of the barrier region, \({{\rm{\Sigma }}}_{L(R)}^{r}\) is the left (right) self-energies of graphene leads with \({{\rm{\Sigma }}}_{L,R}^{r}={{\rm{\Sigma }}}_{L,R}^{rK^{\prime} }+{{\rm{\Sigma }}}_{L,R}^{rK}\) and \({{\rm{\Gamma }}}_{L,R}^{\tau }=i({{\rm{\Sigma }}}_{L,R}^{r\tau }-{[{{\rm{\Sigma }}}_{L,R}^{r\tau }]}^{\dagger })\), i.e., the left and right self-energies consists of the K and K′ dependent self-energy \({{\rm{\Sigma }}}_{L,R}^{rK}\) and \({{\rm{\Sigma }}}_{L,R}^{rK^{\prime} }\). The Green function \({G}_{LR}^{r}\) is calculated by usual recursion method, while the self-energy of the graphene lead can be constituted by the left- or right- propagating electron eigenfunctions at the Fermi energy. It is assumed that H 0 is the Hamiltonian of a unit cell of the uniform graphene lead, and the hopping matrix between the neighboring cells is H LR as well as its hermite conjugate H RL = [H LR ]†. Then the eigenfunction |χ〉 satisfies
where H(k) is the Bloch Hamiltonian, k is the wavevector, and a is the lattice constant. The energy dispersion of electrons in the graphene lead is worked out by diagonalizing H(k). One can follow the method in ref. 37 to obtain the left-going (+) or right-going (−) valley-dependent wavefunction \(|{\chi }_{m}^{\tau }(\pm )\rangle \) at the Fermi energy E with its corresponding wavevector \({k}_{m}^{\tau }(\pm )\), where m = (1, …, M) and M is the matrix dimension of the unit cell H(k). Afterwards, the left and right propagation matrices F τ(±) can be directly constructed as
where \({U}^{\tau }(\pm )=({\chi }_{1}^{\tau }(\pm ),\ldots ,{\chi }_{M}^{\tau }(\pm ))\) is a matrix from the eigenfunction \(|{\chi }_{m}^{\tau }(\pm )\rangle \) at the Fermi energy E. According to these propagation matrix, one can build directly the valley-dependent self-energies of the left and right leads as
and
The electron transporting is assumed along the zigzag edge of graphene as shown in Fig. 1(a), because in this case, the wavefunctions of electrons are clearly valley-separated, i.e., the propagating wavevectors of two valleys are different and one can easily construct the valley-dependent self-energy of leads. Notice that we take an periodic boundary condition along the transverse direction in order to avoid the zero-edge state in the zigzag nanoribbon system and simulate a very large graphene system. The energy band of the graphene lead is shown in Fig. 1(c), where the two Dirac points explicitly denotes two valleys at K = 2π/3a and K′ = −2π/3a. At E > t, there is no clear definition of valley and thus, the valley-dependent scattering will occur. The energy diagram of the armchair-edge graphene is also plotted in Fig. 1(d), where the valley is shown degenerate around Dirac points. This implicates that the valley transport should heavily depend on the propagation direction of electrons in the graphene lattice, e.g., along the zigzag-edge or the armchair edge. The K-valley (K′-valley) transmission of electrons is defined as T K = ∑ τ T Kτ (T K′ = ∑ τ T K′τ), so the valley filtering efficiency can be represented by the dimensionless transmission as
A valley-valve device similar to the spin-valve one is also considered as schematically shown in Fig. 1(b), where two opposite potential barriers are put onto the monolayer graphene, which may be regarded as an antiparallel configuration. Similarly, the device is termed as the parallel configuration when the two potential barriers have the same sign. The valley-valve efficiency (vve) is defined as the difference between the conductances of these two configurations.
where T p,ap = T K + T K′ is the total transmission of electrons in the parallel (antiparallel) structure of the valley-valve device. Certainly, vve should critically depend on the efficiency of the valley filtering effect in a single barrier region which is relied on V 0.
Results and Discussions
In our calculations, we take the hopping energy t = 1 as the energy unit, the temperature as zero T = 0 K, and the Fermi energy as E = 0.1t. The transverse width of the device is set as 2048 atoms in a unit cell amounting to 220 nm or so with the lattice constant a = 2.44 Å.
We first present the electron transmission in the simple two-terminal device in Fig. 2(a), where T K and T K′ is plotted as a function of the barrier strength V 0. It is shown that the electrostatic potential \({V}_{0}/t\mathop{ < }\limits_{ \tilde {}}0.2\) near the Dirac point E = 0 does not lead to serious valley splitting of the electron transmissions. When |V 0| is far from the Dirac point significantly, the valley splitting becomes conspicuous. At \(|{V}_{0}|/t\mathop{ > }\limits_{ \tilde {}}1\), one valley transmission exceeds plumb the other one. As a result, the device functions as a valley filter and this is clearly shown in Fig. 2(b). The valley filter efficiency can amount to as high as \({\eta }_{K({K}^{^{\prime} })}\sim \mathrm{94 \% }\). The clear oscillations come from the resonant transmission of electrons through the rectangle potential barrier V 0 region.
In Fig. 2, the efficient valley filtering effect becomes evident just at \(|{V}_{0}|/t\mathop{ > }\limits_{ \tilde {}}1\) and keeps almost unchanged afterwards. This stems from the fact that when the electron energy meets E > t in Fig. 1(c), the valley degree is no longer valid, and more importantly, the transport modes are shrunk by half because of no valley degeneracy. This immediately indicates that one valley species of electrons incident from leads will be blocked, which is certainly determined by the wavevector match. Therefore, for the electrons incident from the opposite graphene leads, the opposite valley is blocked. This is also the requirement of the time-reversal symmetry. In addition, for a weak V 0, there is no valley (mode) shrinkage so as to no valley filter effect.
Since our studied system has the time-reversal symmetry, we have \({T}^{K}({V}_{0},E)={T}^{{K}^{^{\prime} }}(-{V}_{0},-E)\) and T ττ′ = T τ′τ. The curves are not rigorously symmetric upon V 0 = 0 in Fig. 2, because the Fermi energy E = 0.1t is fixed in numerics. Certainly, for the strong barrier case \({V}_{0}\gg E\), the symmetry is recovered. Moreover, the opposite sign of potentia barrier V 0 will lead to opposite filtering effect. In other words, reversing the sign of V 0 will lead to the opposite valley filter effect. Additionally, the K and K′ valley electrons have the opposite wave vectors, so the left-going K′ valley would be blocked by the potential barrier V 0 if the right-going K valley is prohibited by the same barrier potential.
The single potential barrier V 0 can filtrate valley and the efficiency is quite high, but it is not perfect, since the intervalley scattering due to V 0 cannot be depressed entirely and the symmetry of T ττ′ = T τ′τ persists. A superlattice structure consisting of multiple V 0 barriers should in principal enhance the efficiency further. In Fig. 3, the two- and four-barrier superlattice devices resembling that in Fig. 1(b) are studied and η K(K′) is shown. One can see that the overall efficiency η is enhanced and the maximum efficiency even arrives at 100% in the case of the four-barrier device in Fig. 3(b). This is attributed to the resonant tunneling effect. Certainly, the dips in those curves are also strengthened. The curves are not as smooth as ones in Fig. 2, because several different oscillating periodicities superposition together from either the barrier length, L, or the distance between the two barriers, L 0.
Based on the above results, it is naturally envisaged that two opposite barriers consisting in a double-barrier device should block the current totally, which is similar to the GMR effect. This opposite barrier structure can be dubbed as the antiparallel configuration, while the two same barriers V 0 is the parallel configuration. The latter structure shall allow one valley electrons flowing and thus, its conductance should be much sizable in comparison to the former one. Similar to the spin-valve effect, we calculate the conductances of these two configurations and present the valley-valve efficiency vve in Fig. 4. It is shown that the transmission T p of the parallel-configuration device is mostly larger than that of the antiparallel one (T ap ) in Fig. 4(a). At some resonances, however, T ap exceeds T p , and the valley-valve effect is not ideal as expected. This is clearly shown in Fig. 4(b). The exact reason is the coherent transport and the resonant tunneling, which accounts for such oscillating behaviors.
In a realistic device, there generally exist some interactions like disorders and electron-phonon coupling, which will smear the phase-coherent transport and may improve the valley-valve effect provided that the intervalley scattering does not severely occur in the process of the incoherent scattering. In our calculations, we simply consider a zero distance between two opposite barriers of Fig. 1(b) (L 0 = 0) in order to diminish the resonant tunneling effect. The results are shown in Fig. 5, where the parameters are the same as those in Fig. 4 except for L 0 = 0. It is shown that T p > T ap is valid in nearly all V 0 range (\({V}_{0}/t\mathop{ > }\limits_{ \tilde {}}1\)), T ap are entirely suppressed in Fig. 5(a), which in turn leads to a saturated valley-valve efficiency vve = 1 in Fig. 5(b).
We also consider a four-barrier superlattice structure as that studied in Fig. 3(b), which is actually a parallel structure. While the antiparallel configuration is defined as V 0/−V 0/V 0/−V 0 with an alternative V 0 serial. Both nonzero and zero L 0 cases are calculated and shown in Fig. 6(a,b). Similarly, the efficiency vve shows a strong resonant tunneling feature when L 0 is nonzero in Fig. 6(a), i.e., the conductance of the parallel structure does not always exceed the antiparallel one and the peaks and dips are strengthened. Whereas for the case of L 0 = 0, a saturated value vve = 1 appears again at \({V}_{0}/t\mathop{ > }\limits_{ \tilde {}}1.1\) in Fig. 6(b), i.e., the current is totally blocked in the antiparallel structure, which is the same as that in Fig. 5(b) again.
In above numerics, the rectangle profile of the potential barrier was employed, however, other continuous and smooth functions of V 0 were also computed but showed no qualitative influence on our obtained results. Actually, a real factor influencing the filtering effect is the transport direction of electrons. As stated earlier, the electron transport is assumed along the zigzag edge and there is a valley (mode) shrinkage phenomenon at E > t as shown in Fig. 1(c), which is necessary to bring about the valley filter and valve effect. When the transport direction along the armchair edge is considered, the valley is almost degenerate whatever V 0 is taken, and there shall be no valley-filtering or valley-valve effect. Since the doping level of pristine graphene was proved to be changed easily by gate voltages38, it is not difficult to observe our proposal of the valley-filter or valley-valve effect.
Conclusion
In summary, we have proposed a simple method to filter valley in the monolayer graphene system by introducing an extremely strong potential barrier. It is shown that the potential barrier can block one valley but allow the opposite valley tunneling through it, which is dependent on the sign of the barrier as well as the current direction. The valley filtering efficiency can be further enhanced in a multi-barrier superlattice structure. The valley-valve effect was also studied and the device conductance can be significantly controlled by reversing the barrier sign, when the distance between barriers are short enough for suppressing the resonant tunneling effect. These findings are dependent on the electron transport being along the zigzag edge direction of the graphene lattice. Our findings may shed light on fully electric controlling of the valley transport in graphene.
References
Pesin, D. & MacDonald, A. H. Spintronics and pseudospintronics in graphene and topological insulators. Nat. Mater. 11, 409 (2012).
Behnia, K. Condensed-matter physics: polarized light boosts valleytronics. Nat. nanotech. 7, 488 (2012).
Xiao, D., Yao, W. & Niu, Q. Valley-contrasting physics in graphene: magnetic moment and topological transport. Phys. Rev. Lett. 99, 236809 (2007).
Morpurgo, A. F. & Guinea, F. Intervalley scattering, long-range disorder, and effective time-reversal symmetry breaking in graphene. Phys. Rev. Lett. 97, 196804 (2006).
Morozov, S. V. et al. Strong suppression of weak localization in graphene. Phys. Rev. Lett. 97, 016801 (2006).
Gorbachev, R. V., Tikhonenko, F. V. & Mayorov, A. S. et al. Weak localization in bilayer graphene. Phys. Rev. Lett. 98, 176805 (2007).
Chen, J. H., Cullen, W. G. & Jang, C. et al. Defect scattering in graphene. Phys. Rev. Lett. 102, 236805 (2009).
Gorbachev, R. V., Song, J. C. W. & Yu, G. L. et al. Detecting topological currents in graphene superlattices. Science 346, 448 (2014).
Sui, M., Chen, G. & Ma, L. et al. Gate-tunable topological valley transport in bilayer graphene. Nat. Phys. 11, 1027 (2015).
Shimazaki, Y., Yamamoto, M. & Borzenets, I. V. et al. Generation and detection of pure valley current by electrically induced Berry curvature in bilayer graphene. Nat. Phys. 11, 1032 (2015).
Rycerz, A., Tworzydlo, J. & Beenakker, C. W. J. Valley filter and valley valve in graphene. Nat. Phys. 3, 172 (2007).
Akhmerov, A. R., Bardarson, J. H. & Rycerz, A. et al. Theory of the valley-valve effect in graphene nanoribbons. Phys. Rev. B77, 205416 (2008).
Golub, L. E., Tarasenko, S. A. & Entin, M. V. et al. Valley separation in graphene by polarized light. Phys. Rev. B 84, 195408 (2011).
Kirczenow, G. Valley currents and nonlocal resistances of graphene nanostructures with broken inversion symmetry from the perspective of scattering theory. Phys. Rev. B 92, 125425 (2015).
Wehling, T. O., Huber, A. & Lichtenstein, A. I. et al. Probing of valley polarization in graphene via optical second-harmonic generation. Phys. Rev. B 91, 041404R (2015).
Assili, M., Haddad, S. & Kang, W. Electric field-induced valley degeneracy lifting in uniaxial strained graphene: Evidence from magnetophonon resonance. Phys. Rev. B 91, 115422 (2015).
Pratley, L. & Zülicke, U. Valley filter from magneto-tunneling between single and bi-layer graphene. Appl. Phys. Lett. 104, 082401 (2014).
Kundu, A., Fertig, H. A. & Seradjeh, B. Floquet-Engineered Valleytronics in Dirac Systems. Phys. Rev. Lett. 116, 016802 (2016).
Cao, T., Wang, G. & Han, W. et al. Valley-selective circular dichroism of monolayer molybdenum disulphide. Nat. Commun. 3, 887 (2012).
Shan, W. Y., Zhou, J. & Xiao, D. Optical generation and detection of pure valley current in monolayer transition-metal dichalcogenides. Phys. Rev. B 91, 035402 (2015).
Zeng, H., Dai, J. & Yao, W. et al. Valley polarization in MoS2 monolayers by optical pumping. Nat. Nanotechnol. 7, 490 (2012).
Gunlycke, D. & White, C. T. Graphene valley filter using a line defect. Phys. Rev. Lett. 106, 136806 (2011).
Liu, Y., Song, J. & Li, Y. et al. Controllable valley polarization using graphene multiple topological line defects. Phys. Rev. B 87, 195445 (2013).
Chen, J. H., Autes, G. & Alem, N. et al. Controlled growth of a line defect in graphene and implications for gate-tunable valley filtering. Phys. Rev. B 89, 121407(R) (2014).
Fujita, T., Jalil, M. B. A. & Tan, S. G. Valley filter in strain engineered graphene. Appl. Phys. Lett. 97, 043508 (2010).
Low, T. & Guinea, F. Strain-induced pseudomagnetic field for novel graphene electronics. Nano. Lett. 10, 3551 (2010).
Khatibi, Z., Rostami, H. & Asgari, R. Valley polarized transport in a strained graphene based Corbino disc. Phys. Rev. B 88, 195426 (2013).
Wu, Z., Zhai, F. & Peeters, F. M. et al. Valley-dependent Brewster angles and Goos-H?nchen effect in strained graphene. Phys. Rev. Lett. 106, 176802 (2011).
Jiang, Y., Low, T. & Chang, K. et al. Generation of pure bulk valley current in graphene. Phys. Rev. Lett. 110, 046601 (2013).
Pereira, V. M. & Neto, A. H. C. Strain engineering of graphene’s electronic structure. Phys. Rev. Lett. 103, 046801 (2009).
Nguyen, V. H., Dechamps, S. & Dollfus, P. et al. Valley filtering and electronic optics using polycrystalline graphene. Phys. Rev. Lett. 117, 247702 (2016).
Hsieh, S. H. & Chu, C. S. Asymmetric valley-resolved beam splitting and incident modes in slanted graphene junctions. Appl. Phys. Lett. 108, 033113 (2016).
Wu, Q. P., Liu, Z. F. & Chen, A. X. et al. Full Valley and Spin Polarizations in Strained Graphene with Rashba Spin Orbit Coupling and Magnetic Barrier. Sci. Rep. 6, 21590 (2016).
Levy, N., Burke, S. A. & Meaker, K. L. et al. Strain-induced pseudo-magnetic fields greater than 300 tesla in graphene nanobubbles. Science 329, 544 (2010).
Settnes, M., Power, S. R. & Brandbyge, M. et al. Graphene Nanobubbles as Valley Filters and Beam Splitters. Phys. Rev. Lett. 117, 276801 (2016).
Milovanovič, S. P. & Peeters, F. M. Strain controlled valley filtering in multi-terminal graphene structures. Appl. Phys. Lett. 109, 203108 (2016).
Ando, T. Quantum point contacts in magnetic fields. Phys. Rev. B 44, 8017 (1991).
Castro Neto, A. H., Guinea, F., Peres, N. M. R., Novoselov, K. S. & Geim, A. K. The electronic properties of graphene. Rev. Mod. Phys. 81, 109 (2009).
Acknowledgements
The work described in this paper is supported by the National Natural Science Foundation of China (NSFC, Grant Nos 11204187, and 11574045).
Author information
Authors and Affiliations
Contributions
J.F.L. and J.W. conceived the study. J.J.W. and S.L. performed the numerical calculations. J.J.W. wrote the main manuscript text. All authors contributed to discussion and reviewed the manuscript.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wang, J.J., Liu, S., Wang, J. et al. Valley filter and valve effect by strong electrostatic potentials in graphene. Sci Rep 7, 10236 (2017). https://doi.org/10.1038/s41598-017-10460-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-10460-5
This article is cited by
-
Valley Hall Effect and Magnetic Moment in Magnetized Silicene
Journal of Superconductivity and Novel Magnetism (2019)
-
Magnetic Field Effects on Optical Conductivity of Doped Armchair Graphene Nanoribbon
Journal of Superconductivity and Novel Magnetism (2019)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.