Abstract
Methanol is a key building block in the chemical industry. In recent years, it has been used as a C1 source in various organic transformations in the presence of a transition-metal catalyst. This protocol describes the ruthenium- and cobalt-catalyzed utilization of methanol in different types of methylation reactions and heterocycle synthesis. Initially, we describe the synthesis of tridentate ligands (L1–L3) and their corresponding Ru(II) complexes (Ru-1, -2 and -3) and then detail how to apply these Ru(II) complexes and Co/PP3 (PP3 = P(CH2CH2PPh2)3) in various methanol dehydrogenative coupling reactions. We discuss six types of transformations by using methanol or a methanol/water mixture. The experimental setup for all the catalytic reactions is similar and involves adding all the respective reagents and solvents to an argon-filled pressure tube, which is sealed (by screw cap) and refluxed at the indicated temperature before the desired products are isolated and characterized. The catalytic systems described in this protocol work well for both small-scale and preparative-scale synthesis of various N-methylated amines/amides, C-methylated products and quinazolinones. These catalytic reactions are greener and more sustainable than conventional synthesis methods, with only H2 and/or H2O as by-products, and we evaluate the ‘green chemistry metrics’ for a typical substrate. The total time required for the catalytic experiments described in this protocol is 16–28 h, and the operation time is 4 h. An average level of expertise in organic synthesis is required to carry out these protocols.
Key points
-
This protocol describes methods for using methanol as a C1 source for the generation of various products, including N-methylated amines/amides, C-methylated products and quinazolinones.
-
The technique uses ruthenium and cobalt catalysts, which allow for a more sustainable approach than other methods for these processes, with only H2 and H2O produced as by-products.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
Additional data related to this protocol are available in Key references using this protocol. Analytical data for the four different compounds described here are presented in the primary papers (see Related links).
References
Natte, K., Neumann, H., Jagadeesh, R. V. & Beller, M. Convenient iron-catalyzed reductive aminations without hydrogen for selective synthesis of N-methylamines. Nat. Commun. 8, 1344 (2017).
White, T. R. et al. On-resin N-methylation of cyclic peptides for discovery of orally bioavailable scaffolds. Nat. Chem. Biol. 7, 810–817 (2011).
Chatterjee, J., Rechenmacher, F. & Kessler, H. N-Methylation of peptides and proteins: an important element for modulating biological functions. Angew. Chem. Int. Ed. 52, 254–269 (2013).
Chatterjee, J., Gilon, C., Hoffman, A. & Kessler, H. N-Methylation of peptides: a new perspective in medicinal chemistry. Acc. Chem. Res. 41, 1331–1342 (2008).
Barreiro, E. J., Kümmerle, A. E. & Fraga, C. A. M. The methylation effect in medicinal chemistry. Chem. Rev. 111, 5215–5246 (2011).
Goyal, V. et al. Recent advances in the catalytic N-methylation and N-trideuteromethylation reactions using methanol and deuterated methanol. Coord. Chem. Rev. 474, 214827 (2023).
Natte, K., Neumann, H., Beller, M. & Jagadeesh, R. V. Transition-metal-catalyzed utilization of methanol as a C1 source in organic synthesis. Angew. Chem. Int. Ed. 56, 6384–6394 (2017).
Li, Y., Cui, X., Dong, K., Junge, K. & Beller, M. Utilization of CO2 as a C1 building block for catalytic methylation reactions. ACS Catal. 7, 1077–1086 (2017).
Li, Y., Fang, X., Junge, K. & Beller, M. A general catalytic methylation of amines using carbon dioxide. Angew. Chem. Int. Ed. 52, 9568–9571 (2013).
Das, S., Bobbink, F. D., Laurenczy, G. & Dyson, P. J. Metal-free catalyst for the chemoselective methylation of amines using carbon dioxide as a carbon source. Angew. Chem. Int. Ed. 53, 12876–12879 (2014).
Das, S., Bobbink, F. D., Bulut, S., Soudani, M. & Dyson, P. J. Thiazolium carbene catalysts for the fixation of CO2 onto amines. Chem. Commun. 52, 2497–2500 (2016).
Chen, Y. Recent advances in methylation: a guide for selecting methylation reagents. Chemistry 25, 3405–3439 (2019).
Huang, C., Fu, Y., Fu, H., Jiang, Y. & Zhao, Y. Highly efficient copper-catalyzed cascade synthesis of quinazoline and quinazolinone derivatives. Chem. Commun. (Camb.) 2008, 6333–6335 (2008).
Horváth, I. T. Introduction: sustainable chemistry. Chem. Rev. 118, 369–371 (2018).
Watson, A. J. A. & Williams, J. M. J. The give and take of alcohol activation. Science 329, 635–636 (2010).
Gunanathan, C. & Milstein, D. Applications of acceptorless dehydrogenation and related transformations in chemical synthesis. Science 341, 1229712 (2013).
Moran, J., Preetz, A., Mesch, R. A. & Krische, M. J. Iridium-catalysed direct C–C coupling of methanol and allenes. Nat. Chem. 3, 287–290 (2011).
Michael, J. P. Quinoline, quinazoline and acridone alkaloids. Nat. Prod. Rep. 25, 166–187 (2008).
Rotella, D. P. Heterocycles in drug discovery: properties and preparation. In Advances in Heterocyclic Chemistry Vol. 134 (eds. Meanwell, N. A. & Lolli, M. L.) 149–183 (Academic Press, 2021).
Paul, B., Shee, S., Chakrabarti, K. & Kundu, S. Tandem transformation of nitro compounds into N-methylated amines: greener strategy for the utilization of methanol as a methylating agent. ChemSusChem 10, 2370–2374 (2017).
Paul, B., Shee, S., Panja, D., Chakrabarti, K. & Kundu, S. Direct synthesis of N,N-dimethylated and β-methyl N,N-dimethylated amines from nitriles using methanol: experimental and computational studies. ACS Catal. 8, 2890–2896 (2018).
Chakrabarti, K. et al. Utilization of MeOH as a C1 building block in tandem three-component coupling reaction. Org. Lett. 19, 4750–4753 (2017).
Paul, B., Panja, D. & Kundu, S. Ruthenium-catalyzed synthesis of N-methylated amides using methanol. Org. Lett. 21, 5843–5847 (2019).
Samim, S. A., Roy, B. C., Nayak, S. & Kundu, S. Cobalt-catalyzed tandem transformation of 2-aminobenzonitriles to quinazolinones using hydration and dehydrogenative coupling strategy. J. Org. Chem. 85, 11359–11367 (2020).
Paul, B., Chakrabarti, K. & Kundu, S. Optimum bifunctionality in a 2-(2-pyridyl-2-ol)-1,10-phenanthroline based ruthenium complex for transfer hydrogenation of ketones and nitriles: impact of the number of 2-hydroxypyridine fragments. Dalton Trans. 45, 11162–11171 (2016).
Chakrabarti, K. et al. Bifunctional Ru(ii) complex catalysed carbon–carbon bond formation: an eco-friendly hydrogen borrowing strategy. Org. Biomol. Chem. 14, 10988–10997 (2016).
Paul, B. et al. A simple and efficient in situ generated ruthenium catalyst for chemoselective transfer hydrogenation of nitroarenes: kinetic and mechanistic studies and comparison with iridium systems. RSC Adv. 6, 100532–100545 (2016).
Paul, B., Maji, M. & Kundu, S. Atom-economical and tandem conversion of nitriles to N-methylated amides using methanol and water. ACS Catal. 9, 10469–10476 (2019).
Wang, H., Huang, Y., Dai, X. & Shi, F. N-Monomethylation of amines using paraformaldehyde and H2. Chem. Commun. (Camb.) 53, 5542–5545 (2017).
Zhang, L., Zhang, Y., Deng, Y. & Shi, F. Light-promoted N,N-dimethylation of amine and nitro compound with methanol catalyzed by Pd/TiO2 at room temperature. RSC Adv. 5, 14514–14521 (2015).
Liu, J., Song, Y., Wu, X. & Ma, L. N-Dimethylation and N-functionalization of amines using Ru nanoparticle catalysts and formaldehyde or functional aldehydes as the carbon source. ACS Omega 6, 22504–22513 (2021).
Sheldon, R. A. Metrics of green chemistry and sustainability: past, present, and future. ACS Sustain. Chem. Eng. 6, 32–48 (2018).
Li, Z.-l. & Cai, C. Pd/Ni catalyzed selective N–H/C–H methylation of amides by using peroxides as the methylating reagents via a radical process. Org. Chem. Front. 4, 2207–2210 (2017).
Kumar, A., Bhatti, T. M. & Goldman, A. S. Dehydrogenation of alkanes and aliphatic groups by pincer-ligated metal complexes. Chem. Rev. 117, 12357–12384 (2017).
Haibach, M. C., Kundu, S., Brookhart, M. & Goldman, A. S. Alkane metathesis by tandem alkane-dehydrogenation–olefin-metathesis catalysis and related chemistry. Acc. Chem. Res. 45, 947–958 (2012).
Böttger, M. et al. Synthesis of new pyrrole–pyridine-based ligands using an in situ Suzuki coupling method. Beilstein J. Org. Chem. 8, 1037–1047 (2012).
Acknowledgements
This work is financially supported by the Science and Engineering Research Board (SERB), India and the Council of Scientific & Industrial Research (CSIR), India. B.P. and S.K. thank the Department of Chemistry, IIT Kanpur, India for support. Prof. Edward Anderson, Department of Chemistry, University of Oxford, United Kingdom and Marie Skłodowska-Curie actions for an Individual Fellowship are also sincerely acknowledged by B.P.
Author information
Authors and Affiliations
Contributions
B.P. and S.K. contributed intellectually and practically to the development of the transformations.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Protocols thanks the anonymous reviewer(s) for their contribution to the peer review process of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Related links
Key references using this protocol
Paul, B. et al. ChemSusChem 10, 2370–2374 (2017): https://doi.org/10.1002/cssc.201700503
Chakrabarti, K. et al. Org. Lett. 19, 4750–4753 (2017):https://doi.org/10.1021/acs.orglett.7b02105
Paul, B. et al. ACS Catal. 8, 2890−2896 (2018):https://doi.org/10.1021/acscatal.8b00021
Paul, B. et al. Org. Lett. 21, 5843–5847 (2019): https://doi.org/10.1021/acs.orglett.9b01925
Paul, B. et al. ACS Catal. 9, 10469−10476 (2019):https://doi.org/10.1021/acscatal.9b03916
Extended data
Extended Data Fig. 1 Methanol distillation.
a, Full setup for methanol distillation from magnesium cake. b, Correct storage of distilled solvent in a round-bottom flask with a Suba seal under N2 atmosphere. c, Argon inlet to solvent flask during use. After each use of distilled methanol, purge it with argon and handle the distilled solvent very carefully to prevent contamination with moisture. For the long-term use of distilled methanol, store it over 4-Å activated molecular sieves.
Extended Data Fig. 2 Ace pressure tubes.
a–c, Different types of pressure tube (2.5, 4 and 9 mL) used in the protocol. d, Cap and front seal. e, Front seal on the cap. f, PTFE tape. g, Front seal and thread on the cap cover by PTFE. Here, PTFE tape is used to avoid any leakage of solvent during the reaction at high temperature and to increase the lifespan of the front seal (O-ring) by avoiding direct contact of the O-ring with hot solvent during the experiment.
Extended Data Fig. 3 Experimental setup for the synthesis of ligand and images of dried reagent and ligand.
a, Detailed setup for the syntheses of NNN-OMe (L1) and NNN-Me (L3) ligands. b, Image of 2-bromo-1,10-phenanthroline. c, Image of ligand NNN-Me (L3).
Extended Data Fig. 4 Ruthenium(II) precursors.
a, Tris(triphenylphosphine)ruthenium (II) dichloride (RuCl2(PPh3)3). b, Dichloro (p-cymene) ruthenium (II) dimer ([RuCl2(p-cymene)]2).
Extended Data Fig. 5 Experimental setup for the synthesis of ruthenium (II) complexes and images of selected Ru (II) complexes.
a, Detailed setup for the syntheses of Ru-1 and Ru-2. b, Image of [RuCl(phenpy-OMe)(CH3CN)2]Cl (Ru-1). c, Image of trans-RuCl(phenpyMe)(PPh3)2PF6 (Ru-3).
Extended Data Fig. 6 Selected substrates and products.
a–d, Substrates: nitrobenzene (a), benzonitrile (b), acetophenone (c) and benzamide (d). e–h, Products: N-methyl aniline (e), N,N-dimethyl benzylamine (f), 2-methyl-1-phenylpropan-1-one (g) and N-methyl benzamide (h).
Extended Data Fig. 7 Experimental setup for the synthesis of trans-RuCl(phenpyMe)(PPh3)2PF6 (Ru-3).
a, Reaction flask with magnetic stir bar. b, Full setup, during reflux. c, Reaction mixture at the end.
Extended Data Fig. 8 Experimental setup for the synthesis of NNN-OH (L2) ligand.
Synthesis of L2 ligand from ligand L1 and aqueous HBr.
Extended Data Fig. 9 Ligand and cobalt precursors.
a, Tris[2-(diphenylphosphino)ethyl]phosphine (PP3). b, Cobalt(II) bromide (CoBr2). c, Cobalt(II) nitrate hexahydrate (Co(NO3)2 · 6 H2O).
Extended Data Fig. 10 Catalytic experimental setup with different types of pressure tubes.
a,c and e, Pressure tube with all reagents before adding solvent. b,d and f, Full experimental setup with 2.5-, 4- and 9-mL pressure tube, respectively.
Supplementary information
Supplementary Information
Supplementary Methods, Box 1, References and Figs. 1–6
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Paul, B., Kundu, S. The use of methanol as a C1 building block. Nat Protoc (2024). https://doi.org/10.1038/s41596-024-00978-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41596-024-00978-0
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.