Abstract
Non-Newtonian fluids have a viscosity that varies with applied stress. Elastoviscoplastic fluids, the elastic, viscous and plastic properties of which are interconnected in a non-trivial way, belong to this category. We have performed numerical simulations to investigate turbulence in elastoviscoplastic fluids at very high Reynolds-number values, as found in landslides and lava flows, focusing on the effect of plasticity. We find that the range of active scales in the energy spectrum reduces when increasing the fluid plasticity; when plastic effects dominate, a new scaling range emerges between the inertial range and the dissipative scales. An extended self-similarity analysis of the structure functions reveals that intermittency is present and grows with the fluid plasticity. The enhanced intermittency is caused by the non-Newtonian dissipation rate, which also exhibits an intermittent behaviour. These findings have relevance to catastrophic events in natural flows, such as landslides and lava flows, where the enhanced intermittency results in stronger extreme events, which are thus more destructive and difficult to predict.
Similar content being viewed by others
Main
Many fluids in nature and industry exhibit a nonlinear relationship between shear stress and shear rate, which is referred to as non-Newtonian behaviour. Several non-Newtonian features can exist, and they are often present simultaneously. In this Article we focus on the so-called elastoviscoplastic (EVP) fluids, which are fluids with elastic, viscous and plastic properties. EVP materials combine solid-like behaviour and fluid-like response depending on the value of the applied stress: they behave like a solid when the applied stress is below a critical value known as the ‘yield stress’, and flow like a liquid otherwise1. The elastic nature of these materials is present in their solid as well as liquid states2. Such fluids are common in everyday life (examples include toothpaste, jam, cosmetics and mud), and turbulent flows of EVP fluids are found in many industrial processes, including sewage treatment, crude oil transportation, concrete pumping and mud drilling3,4,5, as well as in nature as landslides and lava flows6,7.
A great deal of work has been done in the past to properly characterize the viscoelastic behaviour of a fluid in both laminar and turbulent flows8,9,10,11,12,13, while the effect of plasticity has been studied mainly in low-Reynolds-number laminar conditions1,14,15. Little is known about the plastic behaviour of an EVP fluid in turbulence. Rosti et al.16 studied a turbulent channel flow of an EVP fluid, finding that the shape of the mean velocity profile controls the regions where the fluid is unyielded, forming plugs around the channel centreline that grow in size as the yield stress increases, similar to what is observed in a laminar condition. However, the presence of the plug region has an opposite effect on drag for laminar and turbulent flow configurations, resulting in drag reduction in the turbulent case and drag increase in the laminar one; the turbulent drag behaviour is due to the tendency of the turbulent flow to relaminarize, overall leading to a strongly nonlinear relation between yield stress and drag coefficient. Simulation results were then employed by Le Clainche et al.17, using high-order dynamic mode decomposition, to study the near-wall dynamics, comparing them to those in Newtonian and viscoelastic fluids. Their work revealed that both elasticity and plasticity have similar effects on the near-wall coherent structures, where the flow is characterized by long streaks disturbed for short periods by localized perturbations. A recent experimental study by Mitishita et al.18 on a turbulent duct flow of Carbopol solution de facto verified the numerical results obtained by Rosti et al.16 on the effect of plasticity on the mean flow profile and Reynolds stresses. Additionally, they observed an increase in the energy content at large scales and a decrease at small scales, when compared with a Newtonian fluid. Mitishita et al. reported a −7/2 scaling in the energy spectra at high wavenumbers during Carbopol flows compared to −5/3 scaling in the case of water flows. The newly observed scaling was attributed either to the decrease in the inertial effect in the presence of Carbopol solutions, which shrinks the inertial range of scales because the Reynolds numbers are much lower than in water flows, or to the elastic effects that become important at large wavenumbers where the fluid experiences high frequencies. Moreover, the shear-thinning effects that Carbopol solutions exhibit affected the anisotropy and the overall flow behaviour. The elastic and shear-thinning effects are rheological features of Carbopol solutions and cannot be eliminated experimentally.
Homogeneous and isotropic turbulent flows have long been a focus of turbulence research for their simple theoretical analysis and the generality of their results. To this end, as has been extensively done in the past for viscoelastic flows, here we study tri-periodic homogeneous flow, where the celebrated K41 theory by Kolmogorov19 can be directly applied to a classical Newtonian fluid. In this Article we study a homogeneous isotropic turbulent (HIT) flow of an EVP fluid at high Reynolds number, as shown in Fig. 1. We aim to answer the following fundamental question: how does the Kolmogorov theory change when the fluid is EVP? We will mainly focus on its plastic behaviour and investigate how the yield stress affects the multiscale energy distribution and balance, and how the turbulent energy cascade is altered by the fluid’s plasticity. Our results show profound modifications of the classical picture predicted by the K41 theory for Newtonian fluids, with the emergence of a new scaling range, the dominance of the non-Newtonian flux and dissipation at small and intermediate scales, and enhanced intermittency of the flow.
Results
To investigate the problem at hand, we performed massive three-dimensional direct numerical simulations (DNS) of HIT where we solve the flow equations fully coupled with the constitutive equation of the EVP fluid, within a tri-periodic domain of size L, using 1,024 grid points per side, as described in more detail in the Methods. The flow is controlled by four main parameters: the Reynolds number ReΛ, the Weissenberg number WiΛ, the viscosity ratio α and the Bingham number BiΛ, all based on the root-mean-square velocity fluctuations u′ and Taylor’s microscale Λ. We use the definitions \({{\rm{Re}}_{\varLambda }\equiv \rho {u}^{{\prime} }\varLambda /{\mu }_{{{{\rm{t}}}}},\,{\rm{Wi}}_{\varLambda }\equiv \lambda {\mu }_{{{{\rm{t}}}}}/\rho {\varLambda }_{0}^{2},\,\alpha ={\mu }_{{{{\rm{n}}}}}/{\mu }_{{{{\rm{t}}}}}}\) and \({\rm{Bi}}_{\varLambda }\equiv {\tau }_{\rm{y}}{\varLambda }_{0}/{\mu }_{{{{\rm{t}}}}}{u}_{0}^{{\prime} }\), where ρ is the fluid density, μt ≡ μf + μn is the total dynamic viscosity with μf being the fluid viscosity and μn the non-Newtonian one, λ is the relaxation time, τy is the yield stress, and subscript 0 denotes quantities from the BiΛ = 0 case. The Reynolds number describes the ratio of inertial to viscous forces, and we limit our analysis to high-Reynolds-number flows, achieving a Taylor microscale Reynolds number ReΛ ≈ 435 for the Newtonian flow, at which statistics of the flow have been found to be universal and exhibiting a proper scale separation, with an extensive inertial range of scales extended to almost two decades of wavenumbers. The Reynolds number explored here is the highest in DNS of HIT of non-Newtonian fluids. The Weissenberg number describes the ratio of elastic to viscous forces, and here we limit the analysis to WiΛ ≪ 1 (that is, WiΛ ≈ 10−3), to ensure that elastic effects are subdominant and all the observed changes are due to plasticity. We also fix a value of α = 0.1 to represent a dilute concentration of polymers, in accordance with previous works on the subject16,20. Thus, the key control parameter we vary is BiΛ, which describes the ratio of the yield stress to the viscous stress, and thus correlates with the prevalence of unyielded regions.
Figure 2 depicts the turbulent kinetic energy spectra of the cases analysed. The BiΛ = 0 case is similar to the Newtonian case shown in Supplementary Fig. 1, confirming that the effect of elasticity is subdominant and can be ignored. A clear E ~ κ−5/3 range is visible for more than one decade, showing that ReΛ is high enough to achieve scale separation, with the spectra exhibiting an inertial range of scales followed by a dissipative range. As BiΛ increases, the inertial range is limited to the large scales (small wavenumbers κ), with the energy increasing at large scales and decreasing at small scales. A clear deviation from Kolmogorov scaling becomes noticeable for BiΛ > 1, resulting in the emergence of a new apparent scaling of E ~ κ−2.3 that is shown more clearly by plotting compensated energy spectra (as shown in Supplementary Fig. 3). The difference in scaling between the experimental work (−7/2)18 and the current study (−2.3) is mainly due to the higher values of Reynolds and Bingham numbers considered here. The abrupt change in the spectra with BiΛ is consistent with the bulk flow properties (ReΛ and the volume fraction of the unyielded regions Φ) shown in the inset of Fig. 2: for the cases where BiΛ < 1, ReΛ remains relatively unaltered, with Φ always close to zero, whereas when BiΛ further increases, the microscale Reynolds number ReΛ and the volume Φ of the unyielded regions rapidly increase with a similar trend.
To fully characterize the change in the energy spectra, we study the turbulent kinetic energy balance, which in wavenumber space can be expressed as
where \({{{{\mathcal{F}}}}}_{{{{\rm{inj}}}}}\) is the turbulence production introduced by the external forcing (injected at the largest scale, κL ≡ 2π/L), and \({\varPi ,\,{{{\mathcal{D}}}}}\) and \({{{\mathcal{N}}}}\) are the nonlinear energy flux, the fluid dissipation and the non-Newtonian contribution, respectively. In addition to the classical bulk fluid dissipation rate ϵf, here we have a non-Newtonian dissipation ϵn, which is the rate of removal of turbulent kinetic energy from the flow due to the non-Newtonian extra stress tensor (Supplementary Sections I and II provide a derivation of this equation). Figure 3 shows the turbulent kinetic energy balance for a few representative values of BiΛ. When comparing with Supplementary Fig. 1b, the BiΛ = 0 case closely follows the classical Newtonian turbulent flow, where energy is carried by Π from the large to small scales before being dissipated by the fluid viscosity \({{{\mathcal{D}}}}\). The contribution of the nonlinear convective term Π, which appears as an almost horizontal plateau at relatively large scales, progressively decreases with BiΛ and shrinks towards larger scales, consistent with the reduction of the extension of the inertial range observed in Fig. 2. The reduced energy flux with BiΛ is also accompanied by a decrease of the fluid dissipation \({{{\mathcal{D}}}}\), which is instead compensated by the increase of non-Newtonian contribution \({{{\mathcal{N}}}}\). At small scales (large κ), the relative importance of the non-Newtonian contribution increases with BiΛ, becoming comparable to the fluid dissipation for BiΛ ≈ 2.5 and eventually becoming the dominant term for BiΛ ≳ 12.5, corresponding to the emergence of the new scaling in the energy spectrum shown in Fig. 2; indeed, the non-Newtonian contribution can be interpreted as a combination of a pure energy flux (giving rise to the new scaling region) and a pure dissipative term, as recently suggested by Rosti and others21. Regarding the direction of energy flux, Supplementary Fig. 4 shows that we have a direct cascade of energy from large to small scales for all BiΛ (refs. 22,23).
We extend the analysis done in the spectral domain by computing the longitudinal structure functions defined as Sp(r) = 〈(Δu(r))p〉, where p is the order of the structure function and Δu(r) = u(x + r) − u(x) is the difference in the fluid velocity across a length scale r, projected in the direction of r. According to K41, \({S}_{{{{\rm{p}}}}}(r) \sim {\left(\langle {\epsilon }_{{{{\rm{t}}}}}\rangle r\right)}^{p/3}\); however, when the structure functions are displayed as a function of r, as shown in Fig. 4a, they deviate from the K41 prediction as p increases. This phenomenon is thought to be due to the intermittency of the flow, that is, extreme events that are localized in space and time, and thereby break Kolmogorov’s hypothesis of self-similarity in the inertial range24. Intermittency results in the scaling exponent of r being a nonlinear concave function of p (instead of p/3)25. For the EVP fluid, two scaling regions appear at large BiΛ, with scaling consistent with those from the energy spectra, and with intermittency present in both scaling regions. The role of intermittency in the scaling exponents can be better appreciated when the structure functions are displayed in their extended self-similarity form, obtained by plotting one structure function against another26. In Fig. 4b, S4 and S6 are plotted against S2 for all Bingham numbers considered. We note a clear power-law scaling, which deviates from Kolmogorov’s prediction, even for the BiΛ = 0 case (shown in black). The departure from Kolmogorov’s prediction progressively grows as the plasticity of the fluid increases, suggesting that the flow becomes more intermittent due to its plasticity. This becomes more obvious when we plot Sn compensated by the intermittency correction at BiΛ = 0 against S2 (Supplementary Fig. 5). Also, intermittency appears to act equally in the two scaling regions present at large BiΛ.
Intermittency originates from the multifractal nature of the turbulent dissipation rate24. For Newtonian fluids, this can be quantified by the multifractal spectrum of the energy dissipation rate, ϵf (refs. 24,27), which we report in the inset of Fig. 4b. This graph demonstrates that F(α) is nearly identical for all BiΛ cases except for minor variations at small and large values of α. This implies that the fluid dissipation rate is not the cause of the enhanced intermittency observed in the extended self-similarity analysis.
In the present flow, the turbulent kinetic energy is dissipated by two different terms, ϵf and ϵn, as seen in Fig. 1. We thus investigate their respective behaviour by looking at their probability distribution functions (PDFs; Fig. 5). We name the non-Newtonian contribution ϵn a ‘dissipation’ because, on average, it removes energy from the flow, giving rise to the positive-skewed distributions in Fig. 5b; however, unlike the fluid dissipation, it can take positive or negative values at particular locations in space and time. Figure 5a shows that the distribution of ϵf narrows as BiΛ increases28; on the other hand, from Fig. 5b, we see that that the distribution of ϵn substantially broadens as BiΛ increases. Because the non-Newtonian dissipation becomes dominant for the largest BiΛ (as shown in Fig. 3), we can thus infer that the extreme values of ϵn are indeed the source of the enhanced intermittency observed from the structure function analysis in Fig. 4.
Discussion
By means of unprecedented high-Reynolds-number DNS of an EVP fluid, we have shown that plastic effects substantially alter the classical turbulence predicted by Kolmogorov theory for Newtonian fluids.
We have proved that the non-Newtonian contribution to the energy balance becomes dominant at intermediate and small scales for large Bingham numbers, inducing the emergence of a new intermediate scaling range in the energy spectra between the Kolmogorov inertial and dissipative ranges, where the energy spectrum decays with a −2.3 exponent. Interestingly, this exponent has been recently found for the turbulence of viscoelastic fluids at large Reynolds and Weissenberg numbers21,29, suggesting a possible similarity among plastic and elastic effects on the turbulent cascade. This similarity in the scaling behaviour of the two cases could be attributed to a similar interaction mechanism in the Navier–Stokes equation between the convective and extra stress terms. It is also worth noting that in the context of viscoelastic flows at high Weissenberg number, an exponent less than or equal to −3 has been widely reported in the past8; however, this is only found at relatively lower Reynolds number than investigated here or explored in recent experimental and numerical work21,29. The present work reports the −2.3 scaling in turbulent flows of highly plastic EVP fluids, and further studies on the size and distribution of the unyielded regions could shed more light on the origin of the newly found scaling.
We have also shown that the flow in the presence of plastic effects is more intermittent than in a Newtonian fluid, due to the combination of the classical intermittency originating from the multifractal nature of the turbulent dissipation rate, which remains substantially unaltered, and a new plastic contribution that instead grows with the Bingham number. A direct consequence of this result is that intermittency corrections for an EVP fluid are non-universal and dependent on the flow configuration, differently from viscoelastic flows. These results are relevant for several catastrophic natural flows with high plasticity, such as lava flows and landslides30. Our findings explain why such flows are usually found to be intermittent and frequently aggressive, resulting in more damage. The non-universality of the flow intermittency in EVP fluids reflects also in an increased difficulty in their modelling.
Methods
Governing equations
The flow under investigation is governed by a system of a scalar, a vector and a tensorial equation—the incompressibility constraint, the conservation of momentum, and the constitutive equation for the non-Newtonian extra stress tensor, respectively. The incompressibility constraint and the momentum conservation equations can be written as
where u is the fluid velocity, p is the pressure, ρ is the density and μf is the fluid dynamic viscosity. The term finj represents the external force used to sustain turbulence; here we consider the Arnold–Beltrami–Childress (ABC) flow with forcing
where i, j and k are the Cartesian unit vectors, A, B and C are real parameters, and the flow has periodicity L in x, y and z. In our simulations, we choose A = B = C and use an appropriate value of μf to give a microscale Reynolds number \({{{{{\rm{Re}}}}}_{\varLambda }\approx 435}\) for the Newtonian flow. The last term in equation (3) is defined as fevp ≡ ∇ ⋅ τ, where τ is the non-Newtonian extra stress tensor of the EVP fluid. We adopt the constitutive model proposed by Saramito31 to express the evolution of the extra stress tensor, which can be written as
where (\(\mathop\cdot\limits^{\nabla}\)) denotes the upper convected derivative, that is, \(\mathop{\uptau}\limits^{\nabla}={\frac{\partial {{{\mathbf{\uptau }}}}}{\partial t}+{{{\bf{u}}}}\cdot \nabla {{{\mathbf{\uptau }}}}-{{{\mathbf{\uptau }}}}\cdot \nabla {{{\bf{u}}}}-{(\nabla {{{\bf{u}}}})}^{T}\cdot {{{\mathbf{\uptau }}}}}\). μn is the non-Newtonian dynamic viscosity, τd is the magnitude of the deviatoric part of the stress tensor \({{{{\mathbf{\uptau }}}}}_{\rm{d}}\equiv {{{\mathbf{\uptau }}}}-{{{\rm{tr}}}}({{{\mathbf{\uptau }}}}){{{\bf{I}}}}/3\), and I is the identity tensor, that is, \({\tau }_{\rm{d}}={\sqrt{\frac{1}{2}({{{{\mathbf{\uptau }}}}}_{\rm{d}}:{{{{\mathbf{\uptau }}}}}_{\rm{d}})}}\). Before yielding, that is, τd ≤ τy, the model predicts only recoverable Kelvin–Voigt viscoelastic deformation; after yielding, that is, τd > τy, it predicts Oldroyd-B viscoelastic behaviour. This transition occurs in a continuous manner. There are other EVP models that take into account shear-thinning32 or thixotropic behaviour33; however, we chose the one described above for its simplicity and the least number of involved parameters. Also, this model proved able to capture the main flow characteristics in a turbulent channel flow16,18.
Numerical method
We use the in-house flow solver Fujin (https://groups.oist.jp/cffu/code) to solve the governing equations numerically on a staggered uniform Cartesian grid. Velocities are located on the cell faces, and pressure, stresses and the other material properties are located at the cell centres. The second-order central finite-difference scheme is used for spatial discretization except for the advection term that comes from the upper convective derivative in equation (5), where the fifth-order WENO (weighted essentially non-oscillatory) scheme is adopted34. The second-order Adams–Bashforth scheme coupled with a fractional step method35 is used for the time advancement of all terms except for the non-Newtonian extra stress tensor, which is advanced with the Crank–Nicolson scheme. To enforce a divergence-free velocity field, a fast Poisson solver based on the fast Fourier transform is used for the pressure. The domain decomposition library 2decomp (http://www.2decomp.org) and the MPI protocol are used to parallelize the solver. The evolution equation of the extra EVP stress is formulated and solved using the log-conformation method36 to ensure the positive-definiteness of the conformation tensor. The fluid domain is a periodic cubic box of length L discretized using 1,024 grid points per side, resulting in a large grid resolution sufficient to represent the fluid properties at all the scales of interest with \({\eta /\Delta x}={{{{\mathcal{O}}}}(1)}\), where η is the Kolmogorov length-scale, and Δx is the grid spacing.
Data availability
All data needed to evaluate the conclusions are presented in the paper and/or the Supplementary Information. Data that support the findings of this study are openly available in OIST at https://groups.oist.jp/cffu/abdelgawad2023natphys.
Code availability
The code used for the present research is a standard direct numerical simulation solver for the Navier–Stokes equations. Full details of the code used for the numerical simulations are provided in the Methods and references therein.
References
Balmforth, N. J., Frigaard, I. A. & Ovarlez, G. Yielding to stress: recent developments in viscoplastic fluid mechanics. Annu. Rev. Fluid Mech. 46, 121–146 (2014).
Fraggedakis, D., Dimakopoulos, Y. & Tsamopoulos, J. Yielding the yield-stress analysis: a study focused on the effects of elasticity on the settling of a single spherical particle in simple yield-stress fluids. Soft Matter 12, 5378–5401 (2016).
Hanks, R. W. The laminar-turbulent transition for flow in pipes, concentric annuli and parallel plates. Aiche J. 9, 45–48 (1963).
Hanks, R. W. On the flow of Bingham plastic slurries in pipes and between parallel plates. Soc. Petrol. Eng. J. 7, 342–346 (1967).
Maleki, A. & Hormozi, S. Submerged jet shearing of visco-plastic sludge. J. Non-Newtonian Fluid Mech. 252, 19–27 (2018).
Jerolmack, D. J. & Daniels, K. E. Viewing Earth’s surface as a soft-matter landscape. Nat. Rev. Phys. 1, 716–730 (2019).
Jones, T. J., Reynolds, C. D. & Boothroyd, S. C. Fluid dynamic induced break-up during volcanic eruptions. Nat. Commun. 10, 3828 (2019).
Groisman, A. & Steinberg, V. Elastic turbulence in a polymer solution flow. Nature 405, 53–55 (2000).
Poole, R. J., Alves, M. A. & Oliveira, P. J. Purely elastic flow asymmetries. Phys. Rev. Lett. 99, 164503 (2007).
Haward, S. J., Mckinley, G. H. & Shen, A. Q. Elastic instabilities in planar elongational flow of monodisperse polymer solutions. Sci. Rep. 6, 33029 (2016).
Steinberg, V. Elastic turbulence: an experimental view on inertialess random flow. Annu. Rev. Fluid Mech. 53, 27–58 (2021).
Datta, S. S. et al. Perspectives on viscoelastic flow instabilities and elastic turbulence. Phys. Rev. Fluids 7, 080701 (2022).
Abreu, H., Pinho, F. T. & da Silva, C. B. Turbulent entrainment in viscoelastic fluids. J. Fluid Mech. 934, A36 (2022).
Pavlov, K. B., Romanov, A. S. & Simkhovich, S. L. Hydrodynamic stability of poiseuille flow of a viscoplastic non-Newtonian fluid. Fluid Dynamics 9, 996–998 (1974).
Escudier, M. P. et al. Observations of asymmetrical flow behaviour in transitional pipe flow of yield-stress and other shear-thinning liquids. J. Non-Newtonian Fluid Mech. 127, 143–155 (2005).
Rosti, M. E., Izbassarov, D., Tammisola, O., Hormozi, S. & Brandt, L. Turbulent channel flow of an elastoviscoplastic fluid. J. Fluid Mech. 853, 488–514 (2018).
Le Clainche, S., Izbassarov, D., Rosti, M., Brandt, L. & Tammisola, O. Coherent structures in the turbulent channel flow of an elastoviscoplastic fluid. J. Fluid Mech. 888, A5 (2020).
Mitishita, R. S., MacKenzie, J. A., Elfring, G. J. & Frigaard, I. A. Fully turbulent flows of viscoplastic fluids in a rectangular duct. J. Non-Newtonian Fluid Mech. 293, 104570 (2021).
Kolmogorov, A. The local structure of turbulence in incompressible viscous fluid for very large Reynolds’ numbers. Akademiia Nauk SSSR Doklady 30, 301–305 (1941).
Perlekar, P., Mitra, D. & Pandit, R. Manifestations of drag reduction by polymer additives in decaying, homogeneous, isotropic turbulence. Phys. Rev. Lett. 97, 3–6 (2006).
Rosti, M. E., Perlekar, P. & Mitra, D. Large is different: non-monotonic behaviour of elastic range scaling in polymeric turbulence at large Reynolds and Deborah numbers. Sci. Adv. 9, eadd3831 (2023).
Xia, H., Byrne, D., Falkovich, G. & Shats, M. Upscale energy transfer in thick turbulent fluid layers. Nat. Phys. 7, 321–324 (2011).
Cerbus, R. T. & Chakraborty, P. The third-order structure function in two dimensions: the Rashomon effect. Phys. Fluids 29, 111110 (2017).
Frisch, U. Turbulence: The Legacy of A. N. Kolmogorov (Cambridge Univ. Press, 1995).
Kolmogorov, A. N. A refinement of previous hypotheses concerning the local structure of turbulence in a viscous incompressible fluid at high Reynolds number. J. Fluid Mech. 13, 82–85 (1962).
Benzi, R. et al. Extended self-similarity in turbulent flows. Phys. Rev. E 48, R29–R32 (1993).
Mandelbrot, B. B. Intermittent turbulence in self-similar cascades: divergence of high moments and dimension of the carrier. J. Fluid Mech. 62, 331–358 (1974).
Donzis, D. A., Sreenivasan, K. R. & Yeung, P. K. Scalar dissipation rate and dissipative anomaly in isotropic turbulence. J. Fluid Mech. 532, 199–216 (2005).
Zhang, Y. B., Bodenschatz, E., Xu, H. & Xi, H. D. Experimental observation of the elastic range scaling in turbulent flow with polymer additives. Sci. Adv. 7, eabd3525 (2021).
Schaeffer, D. G. & Iverson, R. M. Steady and intermittent slipping in a model of landslide motion regulated by pore-pressure feedback. SIAM J. Appl. Math. 69, 769–786 (2008).
Saramito, P. A new constitutive equation for elastoviscoplastic fluid flows. J. Non-Newtonian Fluid Mech. 145, 1–14 (2007).
Saramito, P. A new elastoviscoplastic model based on the Herschel-Bulkley viscoplastic model. J. Non-Newtonian Fluid Mech. 158, 154–161 (2009).
Dimitriou, C. J. & McKinley, G. H. A canonical framework for modeling elasto-viscoplasticity in complex fluids. J. Non-Newtonian Fluid Mech. 265, 116–132 (2019).
Shu, C. W. High order weighted essentially nonoscillatory schemes for convection dominated problems. SIAM Rev. 51, 82–126 (2009).
Kim, J. & Moin, P. Application of a fractional-step method to incompressible Navier-Stokes equations. J. Comput. Phys. 59, 308–323 (1985).
Izbassarov, D. et al. Computational modeling of multiphase viscoelastic and elastoviscoplastic flows. Int. J. Numer. Methods Fluids 88, 521–543 (2018).
Acknowledgements
The research was supported by the Okinawa Institute of Science and Technology Graduate University (OIST) with subsidy funding from the Cabinet Office, Government of Japan. We acknowledge the computer time provided by the Scientific Computing section of the Research Support Division at OIST and the computational resources of the supercomputer Fugaku provided by RIKEN through the HPCI System Research Project (project IDs, hp210229 and hp210269).
Author information
Authors and Affiliations
Contributions
M.E.R. conceived the original idea, planned the research and developed the code. All authors performed the numerical simulations, analysed data, outlined the manuscript content and wrote the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Physics thanks Cherif Nouar and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary methods and results, Figs. 1–5.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Abdelgawad, M.S., Cannon, I. & Rosti, M.E. Scaling and intermittency in turbulent flows of elastoviscoplastic fluids. Nat. Phys. 19, 1059–1063 (2023). https://doi.org/10.1038/s41567-023-02018-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41567-023-02018-2
This article is cited by
-
Intermittency in the not-so-smooth elastic turbulence
Nature Communications (2024)