Abstract
Atomic scale engineering of magnetic fields is a key ingredient for miniaturizing quantum devices and precision control of quantum systems. This requires a unique combination of magnetic stability and spin-manipulation capabilities. Surface-supported single atom magnets offer such possibilities, where long temporal and thermal stability of the magnetic states can be achieved by maximizing the magnet/ic anisotropy energy (MAE) and by minimizing quantum tunnelling of the magnetization. Here, we show that dysprosium (Dy) atoms on magnesium oxide (MgO) have a giant MAE of 250 meV, currently the highest among all surface spins. Using a variety of scanning tunnelling microscopy (STM) techniques including single atom electron spin resonance (ESR), we confirm no spontaneous spin-switching in Dy over days at ≈ 1 K under low and even vanishing magnetic field. We utilize these robust Dy single atom magnets to engineer magnetic nanostructures, demonstrating unique control of magnetic fields with atomic scale tunability.
Similar content being viewed by others
Introduction
Single lanthanide atoms adsorbed on surfaces or incorporated in molecular complexes are being pursued in recent years for applications in quantum information technology and high-density magnetic data storage. Major advances in these domains include all-electrical read-out1 and coherent control of their nuclear spins2, the use of atomic clock transitions to protect their spins against dipolar decoherence3, the discovery of single atom magnets4,5, and the ability to manipulate their spin states6. Recently, a distinct class of molecular magnets containing a single Dy atom has even pushed the limit of operational temperatures up to 80 K by enhancing the MAE7,8. Higher uniaxial MAE acts as a barrier against spontaneous reversal of magnetic spins9,10,11, thus enhancing their magnetic lifetimes. The charge balance in such molecular magnets, however, necessitates the use of anionic counterparts, posing limitations on isolating and supporting them on a solid-state substrate. In contrast, single lanthanide atoms can be directly adsorbed on insulating MgO substrates, and due to the linear bond formed at the oxygen site, large MAE values are also expected12. Among the late lanthanides, terbium (Tb), Dy, and holmium (Ho) atoms exhibit large MAE in a uniaxial crystal field (CF)12,13, which led to the first few lanthanide-based single-chain magnets with slow magnetic relaxation14,15. In particular, Dy ions and diatomic units deposited on MgO are predicted to possess significantly larger MAE compared to their counterparts containing Ho12. Additionally, the seminal single-atom magnet, Ho on MgO4, despite its long magnetic lifetime, lacks resilience against slow sweep rates of tip-magnetic fields16.
In this work, we report the first single-atom magnet on a surface that maintains stability at zero external magnetic field as well as against slow magnetic field sweeps, and hence can be used to create atomically localized magnetic fields. We observe magnetic stability of several days in Dy atoms adsorbed on MgO at ≈1 K with a giant MAE of 250 meV, using a low-temperature STM combined with single-atom ESR capability17. Using a spin-polarized tip (SP-tip) we measure random telegraph signal of the two magnetic states in Dy atom and reveal that the magnetization reversal becomes possible only via scattering with tunnelling electrons of energies higher than 140 meV, which is twice compared to the case of single Ho atoms adsorbed on MgO/Ag(100)18. By employing tip-field sweeps19 on sensor Fe atoms20, we directly measure the magnetic dipolar fields from Dy (BDy), which show absence of all major relaxation pathways at low and even zero external magnetic field (Bext)21, unlike Dy-based single-molecule magnets7,22,23. We harness this zero-field magnetic stability in single Dy atoms in several engineered Fe–Dy structures, to demonstrate atomically precise control of magnetic fields.
Results
Figure 1 a shows a constant current STM image highlighting both Fe and Dy single atoms adsorbed atop an oxygen-site of a bilayer MgO patch grown on Ag(001) (see “Methods”). For characterizing the magnetic stability of the Dy atom, we first investigate it with an SP-tip prepared by transferring several Fe atoms from the MgO surface to the tip-apex24. SP-tips offer spin-sensitive read-out via tunnelling magnetoresistance. Thus, a magnetic contrast between two distinct Dy-spin orientations is recorded as switching events in the time-trace of the tip–sample distance (Δz) for fixed tunnelling currents (Fig. 1b)6,25,26. The switching rate increases with bias voltage Vdc, while no magnetization reversal is ever observed for ∣Vdc∣ < 140 meV. From the bias-voltage-dependent switching events measured at 5 T out-of-plane magnetic field (Fig. 1c), we identify two dominant thresholds, at 155 mV and 235 mV (Table S2), which are twice compared to the respective values reported for single Ho atoms on MgO/Ag(001)18. In order to identify the magnetization reversal mechanisms associated with these thresholds, we perform point-charge-based multiplet simulations27. Figure 1d illustrates the resulting energy level distribution of a single Dy atom in 4f9 configuration, indicating an out-of-plane total MAE of 250–meV with a ground state Kramer doublet of \(\langle {J}_{z}\rangle =\pm\!\frac{15}{2}\) and a magnetic moment of 9.9μB. Note that the 4f10 configuration results in significantly reduced MAE (Fig. S8). Due to the fourfold symmetry of the O-adsorption site, the eigenstates of the system are linear combinations of several Jz states28 separated by ΔmJ = ± 4. The resulting state mixing is stronger for states with lower 〈Jz〉 (Fig. 1d). In presence of the tunnelling electrons, this opens up transitions between an initial and a final state with probabilities defined by the interaction operator \({\boldsymbol{J}}\cdot {\boldsymbol{\sigma }}={J}_{z}{\sigma }_{z}+\frac{1}{2}({J}_{+}{\sigma }_{-}+{J}_{-}{\sigma }_{+})\), where J+,− are the ladder operators of the Dy angular momentum J, and σ is the spin operator of the tunnelling electrons29. The selection rule for J ⋅ σ allows transitions for ΔJz = 0, ± 1(mod4), where ΔJz is the difference between initial and final state values of 〈Jz〉. Consequently, we identify seven major routes of different intensities within 146–248 meV, which enable spin–flip events (Fig. 1d). The corresponding calculated switching probabilities for different Δm transitions are in good agreement with experimentally measured thresholds shown in Fig. 1c (see Supplementary section 8).
Although the giant MAE of 250 meV largely reduces the probability of spin-transitions over the anisotropy barrier, it does not ensure magnetic stability against quantum tunnelling. However, following Kramer’s theorem30, the ground state of Dy with half-integer value of 〈Jz〉 should remain doubly-degenerate at Bext = 0 T, thereby implying a vanishing transition probability between \(\langle {J}_{z}\rangle =\pm \frac{15}{2}\). In order to verify this zero-field magnetic stability of Dy, we employ a specific ESR detection method operating in zero external magnetic field and using sweeps of the tip magnetic field only (Btip)19. We probe the stability of the Dy spin states via coupled sensor Fe atoms in engineered Fe–Dy pairs of varying interatomic distances d (see Supplementary section 6). As illustrated in Fig. 2a, the radio frequency (RF) is kept constant (f0) and tip-field sweeps are achieved by varying the tunnelling current at constant Vdc, thereby changing tip–sample distance (see “Methods” and Supplementary section 2). For the following, it is important to note that the SP-tips used in this work for measuring tip-field sweep ESR showed magnetic bistability in low fields (∣Bext∣ < 60 mT), with lifetimes typically shorter than the timescales of our measurements (see Supplementary section 2). This results in two different orientations of the tip-fields with respect to all static magnetic fields (Bstatic). Thus, considering only the out-of-plane projections from both Btip and Bstatic = BDy + Bext, the generic condition for driving tip-field sweep ESR in Fe atoms in strong tip-field regimes (∣Btip∣ > ∣Bstatic∣) can be written as (see “Methods”):
Here, h is Planck’s constant and μFe is the magnetic moment of the sensor Fe atom. In the absence of any static magnetic field (BDy = 0 and Bext = 0), spin resonance occurs when the tip-field induced Zeeman splitting between the two lowest lying states of the Fe atom (2μFeBtip)17 matches B0 = hf0, leading to a single resonance (Fig. 2b). However, in the presence of a static dipolar field from Dy, (BDy ≠ 0 and Bext = 0), the resonance results from two different relative alignments of Btip and BDy. Consequently, the resonance condition is satisfied at two distinct tip-fields centred around \(\frac{h{f}_{0}}{2{\mu }_{{\rm{Fe}}}}\), i.e., \({B}_{{\rm{tip}}}^{1}=\frac{h{f}_{0}}{2{\mu }_{{\rm{Fe}}}}-{B}_{{\rm{Dy}}}\) and \({B}_{{\rm{tip}}}^{2}=\frac{h{f}_{0}}{2{\mu }_{{\rm{Fe}}}}+{B}_{{\rm{Dy}}}\). This interpretation is in excellent agreement with our observation of two ESR peaks for the Fe atom in a Fe–Dy pair at Bext = 0 T (Fig. 2b). Note that the separation between the two resonance peaks in Fe–Dy pairs directly provides a measure of the out-of-plane magnetic field generated by a single Dy atom (BDy). Within magnetic dipole approximations this is proportional to the out-of-plane magnetic moment of the Dy atom (μDy) as \({B}_{{\rm{Dy}}}=\frac{{\mu }_{0}{\mu }_{{\rm{Dy}}}}{4\pi }\times {d}^{-3}\), where μ0 is the vacuum permeability.
The two-resonance feature also appears at small non-zero values of Bext for isolated Fe atoms as shown in Fig. 3a (left panel). This illustrates that the effect of the Dy dipolar field on a neighbouring Fe atom (Fig. 2b, top) is the same as having a static external magnetic field only. The positions of the two ESR peaks evolve linearly with Bext for all cases (Fig. 3a). However, for the Fe–Dy pairs the two ESR peaks merge when the external magnetic field compensates the dipolar field from the Dy atom (Bext = −BDy), thereby shifting them with respect to the isolated Fe case (Fig. 3b). From these measurements we infer the dipolar field of the Dy atom for several Fe–Dy pairs of varying interatomic distance (Fig. 3c). Note that we observe an excellent agreement between frequency sweep and tip-field sweep ESR at two different set frequencies which suggests that tip-fields are not influenced by the presence of the Dy atom (see Supplementary section 2). We fit the ∣BDy∣ values obtained from all ESR measurements to the explicit distance dependence \({B}_{{\rm{Dy}}}=\frac{{\mu }_{0}{\mu }_{{\rm{Dy}}}}{4\pi }\times {d}^{-3}\) and obtain μDy = 10.1 ± 0.3μB, in agreement with the multiplet analysis and the atomic value for Dy in gas phase.
Note that we never observe any spin-switching in Dy over days against repeated cycles of Bext ramps within ± 30 mT (see Supplementary section 3), despite an isotopic composition which bears the possibility of spin–flip transitions at low magnetic fields via hyperfine interaction in 161Dy (19% natural abundance) and 163Dy (25% natural abundance). This is in contrast to the case of single Ho atoms on MgO, where spin-switching was observed at slow magnetic field sweeps16. Moreover, the magnetic state of the Dy atom is also stable against high magnetic fields of 5 T and heating of at least up to 15 K (Fig. S7). Altogether, these results lead us to conclude that Dy is a single atom magnet atop O-site of MgO, even in the limit of vanishing magnetic field. The observed magnetic stability is supported by our multiplet analysis which indicates that the g-factor is essentially uniaxial with negligible transverse component (see Supplementary section 8).
Finally, we demonstrate the versatility of Dy single-atom magnets by combining their long-term magnetic stability with the ability to control their spin state by high-energy tunnelling electrons. To illustrate this, we measure tip-field sweep ESR at Bext = 0 T on the Fe sensor with increasing number of surrounding Dy atoms (N), as presented in Fig. 4a. These Fe–DyN structures are built by positioning one Dy atom at a time at fixed Fe–Dy distance of 1.15 nm (Fig. S6). Subsequently, we prepare their magnetic states into spin down configurations in a site selective manner by injecting high-energy tunnelling electrons (∣Vdc∣ > 150 mV). Thus the total magnetic dipolar field on the sensor Fe atom increases in structures with higher number of Dy atoms, resulting in larger separations between the two resonance peaks (Fig. 4a). Furthermore, selective manipulations of individual Dy spins in Fe–Dy4 also allow us to modify the total magnetic field on the sensor Fe atom (Fig. 4b). Consequently, the separation between the two ESR peaks varies within ≈±25 mT (Fig. 4d). As illustrated in Fig. 4c, d, both approaches lead to a linear increase of the total magnetic dipolar field with the number of Dy atoms, which can be additionally tuned by their relative spin-orientation, thus allowing unique local controls of atomic scale magnetic fields. Such deterministic and local control of magnetic fields can be highly desirable as atomic gates for nanoscale logic devices31, as well as for surface-based quantum architectures. In addition, interacting Dy spin-centres within a surface-based quantum network can exhibit collective magnetic behaviour with high blocking temperature and slow magnetic relaxation, similar to lanthanide-based single-chain magnets14,15.
Methods
Sample preparation
The Ag(001) surface was prepared by several cycles of sputtering and annealing. For subsequent MgO growth, the crystal was heated to 700 K and exposed to Mg from a crucible evaporator in an oxygen partial pressure of 1 × 10−6 mbar. Under these conditions, 40 min exposure yields an average of two monolayers of MgO. Next, the sample was cooled down to room temperature within 15 min, and was transferred to the cold STM (4 K). Prior to single atom deposition, the sample manipulator was pre-cooled by touching the sample for 20 min. Subsequently, the sample was quickly taken into an exchange chamber, where depositions of Fe and Dy were performed within a few seconds on to the cold sample using an electron beam evaporator and at a base pressure of <7 × 10−10 mbar. For STM measurements we used a PtIr tip, with a tip apex presumably silver-coated due to repeated indentation into the silver substrate for tip preparation. Tunnelling bias voltages were applied to the tip, however, the Vdc values are expressed with an additional negative sign, i.e., with respect to the sample, as it is conventionally done.
ESR measurements
For the ESR measurements17, an RF generator (Keysight E8257D) was used to generate the radio frequency signal, which was subsequently added to the DC bias voltage using a bias-tee (SigaTek SB15D2) located outside of the vacuum chamber. A lock-in amplifier (Stanford Research Systems SR860) operating with on-off modulation at 95 Hz was used for signal detection. For conducting the tip-field sweep ESR, the RF-generator was fixed at a constant frequency and output power. Next, the STM feedback loop was kept engaged with low feedback gain and the tunnel current set point was swept. Consequently, the tip–sample distance was swept while the lockin-signal was monitored.
Note that the tip-field sweep ESR measurements are typically performed in strong tip-field regimes satisfying ∣Btip∣ > ∣BDy + Bext∣. Thus, for Fe atoms in Fe–Dy pairs, the generic resonance condition can be written as
Given its stable magnetic orientation, the Dy atom induces a constant dipolar magnetic field on the Fe sensor. This results in two resonance peaks for all values of Bext used in this work, except for the merging points, i.e., Bext = −BDy. In contrast to the case of Dy atoms, Fe atoms on MgO exhibit significantly shorter magnetic lifetimes24. Following Eq. (2), this gives rise to a maximum of four ESR peaks for Fe atoms in Fe–Fe pairs as shown in Supplementary section 4.
Fitting ESR peaks
In order to determine the position of the resonance during the tip-field sweeps, we fit the experimental data shown in Fig. 2b, 3a, and 4a, b to a Fano–Lorentzian of the form
Here, Ipeak is the amplitude at the resonant tunnelling current and q is the Fano factor, arising from an additional homodyne detection of ESR32. In addition, \(\delta =\frac{{B}_{{\rm{tip}}}-{B}_{0}}{\tau /2}\), where τis the linewidth of the peak and B0 is the tip magnetic field for which the resonance occurs in an isolated Fe atom. The ESR signal was always normalized to the set point tunnel current for comparison. Finally for all datasets a polynomial background of degree 2 was subtracted, since the signal intensity increases with tunnel current, due to an increase of the number of read-out tunnel current electrons.
Data availability
The datasets generated during and/or analysed during the current study are available from A.S. (a.singha@fkf.mpg.de) upon reasonable request.
Code availability
There is no mathematical algorithm or custom code that is deemed central to the conclusion of this manuscript. However, the custom codes that were simply used for data analysis are available from A.S. (a.singha@fkf.mpg.de) upon reasonable request.
References
Vincent, R., Klyatskaya, S., Ruben, M., Wernsdorfer, W. & Balestro, F. Electronic read-out of a single nuclear spin using a molecular spin transistor. Nature 488, 357–360 (2012).
Thiele, S. et al. Electrically driven nuclear spin resonance in single-molecule magnets. Science 344, 1135–1138 (2014).
Shiddiq, M. et al. Enhancing coherence in molecular spin qubits via atomic clock transitions. Nature 531, 348–351 (2016).
Donati, F. et al. Magnetic remanence in single atoms. Science 352, 318–321 (2016).
Baltic, R. et al. Superlattice of single atom magnets on graphene. Nano Lett. 16, 7610–7615 (2016).
Natterer, F. D. et al. Reading and writing single-atom magnets. Nature 543, 226–228 (2017).
Goodwin, C. A. P., Ortu, F., Reta, D., Chilton, N. F. & Mills, D. P. Molecular magnetic hysteresis at 60 kelvin in dysprosocenium. Nature 548, 439–442 (2017).
Guo, F.-S. et al. Magnetic hysteresis up to 80 kelvin in a dysprosium metallocene single-molecule magnet. Science 362, 1400–1403 (2018).
Gatteschi, D., Sessoli, R. & Villain, J. Molecular Nanomagnets (Oxford University Press, 2006).
Rinehart, J. D. & Long, J. R. Exploiting single-ion anisotropy in the design of f-element single-molecule magnets. Chem. Sci. 2, 2078–2085 (2011).
Neese, F. & Pantazis, D. A. What is not required to make a single molecule magnet. Faraday Discuss. 148, 229–238 (2011).
Ungur, L. & Chibotaru, L. F. Strategies toward high-temperature lanthanide-based single-molecule magnets. Inorg. Chem. 55, 10043–10056 (2016).
Goodwin, C. A. P., Reta, D., Ortu, F., Chilton, N. F. & Mills, D. P. Synthesis and electronic structures of heavy lanthanide metallocenium cations. J. Am. Chem. Soc. 139, 18714–18724 (2017).
Bernot, K., Bogani, L., Caneschi, A., Gatteschi, D. & Sessoli, R. A family of rare-earth-based single chain magnets:? Playing with anisotropy. J. Am. Chem. Soc. 128, 7947–7956 (2006).
Bogani, L., Vindigni, A., Sessoli, R. & Gatteschi, D. Single chain magnets: where to from here? J. Mater. Chem. 18, 4750–4758 (2008).
Forrester, P. R. et al. Quantum state manipulation of single atom magnets using the hyperfine interaction. Phys. Rev. B 100, 180405 (2019).
Baumann, S. et al. Electron paramagnetic resonance of individual atoms on a surface. Science 350, 417–420 (2015).
Natterer, F. D., Donati, F., Patthey, F. & Brune, H. Thermal and magnetic-field stability of holmium single-atom magnets. Phys. Rev. Lett. 121, 027201 (2018).
Willke, P. et al. Tuning single-atom electron spin resonance in a vector magnetic field. Nano Lett. 19, 8201–8206 (2019).
Choi, T. et al. Atomic-scale sensing of the magnetic dipolar field from single atoms. Nat. Nanotechnol. 12, 420–424 (2017).
Dreiser, J. Molecular lanthanide single-ion magnets: from bulk to submonolayers. J. Phys. Condens. Matter 27, 183203 (2015).
Studniarek, M. et al. Understanding the superior stability of single-molecule magnets on an oxide film. Adv. Sci. 6, 1901736 (2019).
Spree, L. & Popov, A. A. Recent advances in single molecule magnetism of dysprosium-metallofullerenes. Dalton Trans. 48, 2861–2871 (2019).
Paul, W. et al. Control of the millisecond spin lifetime of an electrically probed atom. Nat. Phys. 13, 403–407 (2016).
Loth, S., Baumann, S., Lutz, C. P., Eigler, D. M. & Heinrich, A. J. Bistability in atomic-scale antiferromagnets. Science 335, 196–199 (2012).
Khajetoorians, A. A. et al. Current-driven spin dynamics of artificially constructed quantum magnets. Science 339, 55–59 (2013).
Singha, A. et al. Orbital-resolved single atom magnetism measured with x-ray absorption spectroscopy. Preprint at https://arxiv.org/abs/2012.10972 (2020).
Hübner, C., Baxevanis, B., Khajetoorians, A. A. & Pfannkuche, D. Symmetry effects on the spin switching of adatoms. Phys. Rev. B 90, 155134 (2014).
Miyamachi, T. et al. Nature 503, 242–246 (2013).
Abragam, A. & Bleaney, B. Electron Paramagnetic Resonance of Transition Ions (Clarendon Press, Oxford, 1970).
Khajetoorians, A. A., Wiebe, J., Chilian, B. & Wiesendanger, R. Realizing all-spin–based logic operations atom by atom. Science 332, 1062–1064 (2011).
Willke, P. et al. Probing quantum coherence in single-atom electron spin resonance. Sci. Adv. 4, eaaq1543 (2018).
Acknowledgements
All authors acknowledge the Institute for Basic Science for grant IBS-R027-D1. P.W. acknowledges funding from the Emmy Noether Programme of the DFG (WI5486/1-1). T.B. acknowledges support from the Swiss National Science Foundation under Project no. 200020_176932.
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
A.S. conceived the idea. A.S., P.W., T.B., and X.Z. performed the experiments. A.S., P.W., and T.B. analysed the data. F.D. performed the multiplet analysis. T.C., F.D., H.B., and A.J.H. supervised the project. A.S. wrote the manuscript with contributions from all co-authors. All authors discussed the results.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Yukio Hasegawa and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Singha, A., Willke, P., Bilgeri, T. et al. Engineering atomic-scale magnetic fields by dysprosium single atom magnets. Nat Commun 12, 4179 (2021). https://doi.org/10.1038/s41467-021-24465-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-021-24465-2
This article is cited by
-
Electrically driven spin resonance of 4f electrons in a single atom on a surface
Nature Communications (2024)
-
Electrically controlled nonvolatile switching of single-atom magnetism in a Dy@C84 single-molecule transistor
Nature Communications (2024)
-
A quantum sensor for atomic-scale electric and magnetic fields
Nature Nanotechnology (2024)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.