Abstract
Selectivity control of varied C–H bonds in a complex molecule is a long-standing goal and still a great challenge in C–H activation field. Most often, such selectivity is achieved by the innate reactivity of different C–H bonds. In this context, the classic Mannich reaction of acetophenone derivatives and imines is ascribed to the more reactive C(sp3)–H bonds α to the carbonyl, with the much less reactive aromatic C(sp2)–H bonds remaining intact. Herein we report an aromatic C(sp2)–H addition of ketones to imines enabled by manganese catalysis, which totally reverses the innate reactivity of C–H bonds α to the carbonyl and those on the aromatic ring. Diverse products of ortho-C–H aminoalkylated ketones, cyclized exo-olefinic isoindolines, and three-component methylated isoindolines can be successfully accessed under mild reaction conditions, which significantly expands the synthetic utilities of ketones as simple bulk chemicals.
Similar content being viewed by others
Introduction
Ketones such as acetophenone are considered among the most easily accessible and practically useful building blocks in both laboratories and chemical industries. They undergo various transformations on the α-C–H bonds with a wide range of electrophiles, which now constitute an important chapter in many textbooks of organic chemistry. Among them, the Mannich reaction, enabling an addition of the α-C–H bond to an iminium ion or imine, has been known for a long time and represents one of the most classic reactions of ketones (Fig. 1a)1,2,3. It proceeds easily under either acidic or basic reaction conditions to afford the β-amino carbonyl and/or other derivatives. Of note, the C(sp2)–H bonds ortho to the carbonyl of ketones remain intact during this process, which shows that the reactivity of α-C–H bonds holds an absolute superiority over that of the ortho-C–H bonds on the benzene ring.
Recently, the directed C–H transformations of ketones4,5 have attracted immense attentions due to the prevalence of the carbonyl group in natural products, pharmaceuticals, and organic synthesis. Since the pioneering work of Ru-catalyzed aromatic C–H alkylation by Murai and others6,7,8,9,10, the ketone-directed C–H alkenylation11,12,13, arylation14,15,16, and amination17,18,19, among others20,21,22,23,24,25 have been elegantly demonstrated. Note that in most of these protocols the undesirable reactions on α-C–H bonds of ketones are not notorious by choosing suitable reaction partners. Moreover, these reactions have heavily relied on late transition metals (Ru, Rh, Pd, and Ir) so far. Developments of earth-abundant base metal catalyzed site-selective aromatic C–H transformations of ketones with more challenging imine electrophiles have not been reported yet. Despite of their huge synthetic interests, considerable challenges still remain in these processes, such as the formidably competitive Mannich and/or Aldol-type reactions of α-C–H bonds of ketones, the relatively inert reactivity of aromatic C–H bonds with a weakly coordinating ketone group26, and the lower catalytic reactivity of base metals compared with the precious ones. To address these issues, we resort to manganese-promoted C–H activation27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43, in which the stoichiometric cyclomanganation of ketones was shown by Kaesz and Nicholson as early as in 197544,45. However, the manganese-catalyzed aromatic C–H transformations of ketones remain elusive.
Here, we describe, as our continuous interest in manganese catalysis31,32,33,34,35,36, a manganese-catalyzed site-selective aromatic C–H addition of ketones to imines under mild reaction conditions, while the conventional Mannich reaction is completely suppressed. Moreover, cyclized exo-olefinic isoindoline and three-component methylated isoindoline derivatives can be selectively obtained. Thus, such diverse reactivity provides a straightforward and efficient way to access varied functionalized isoindolines from simple ketones and imines.
Results
Optimization of Reaction conditions
As shown in Fig. 1b, we intended to develop a manganese-catalyzed aromatic C–H addition of ketones to imines. At the outset, in order to simplify the reaction outcome we chose t-butyl phenyl ketone 1a and imine 2a as model substrates to screen the reaction parameters (see Supplementary Table 1 for more details). The optimal reaction conditions were obtained by using MnBr(CO)5 as a catalyst, Me2Zn/ZnBr2 as promoters in the solvent of 1,2-dichloroethane (DCE) at 60 °C. We then evaluated the reaction chemoselectivity by using acetophenone 1v bearing α-C–H bonds as a substrate which was commonly used in the Mannich reaction (Fig. 2). Interestingly, when the reaction was carried out in the absence of MnBr(CO)5, the Mannich reaction took place overwhelmingly followed by elimination of an amine of the β-amino carbonyl intermediate to afford chalcone 6 in 46% gas chromatography–mass spectrometry (GC-MS) yield. In a sharp contrast, under the manganese catalysis product 4a resulting from aromatic C–H addition/cyclization/elimination was obtained in 66% isolated yield. Remarkably, this represents a reversal of the usual reactivity between ortho C(sp2)–H bonds and α-C(sp3)–H bonds of ketones with imines achieved by using a transition metal catalyst.
Investigations on substrate scopes
With the optimized conditions in hand, the scope of ketones was first explored (Fig. 3). Aromatic ketones bearing a wide range of electronically varied functional groups on the benzene ring delivered the corresponding aromatic C–H addition products successfully (3a–j). Ketones containing two sterically biased C–H bonds reacted with imine 2a at the less hindered positions exclusively giving products 3k and 3l respectively. Heteroaromatic ketone 2,2-dimethyl-1-(thiophen-2-yl)propan-1-one 1m was also a viable substrate affording the expected product 3m in synthetically useful yield. Replacing the t-butyl group of 1a by other alkyl groups bearing α-C–H bonds, the reaction worked as well even at room temperature or 40 °C leading to the expected products smoothly (3n–p). Of note, no Mannich-type products were detected in these reactions and the carbonyl-remaining products provide a handle for further synthetic elaborations. Importantly, benzophenone 1q and phenyl(o-tolyl)methanone 1r were also suitable substrates giving the mono-C–H addition products in good yields (3q, 3r). In addition, arenes and heteroarenes bearing nitrogen-containing directing groups could also undergo the corresponding C–H aminoalkylation reaction with the current reaction conditions (3s–u).46,47,48,49,50,51 Of note, Ackermann has elegantly disclosed the related C–H aminoalkylation of indoles with imines in the absence of zinc additives at higher tempreture.40
Next, the scope of imines was surveyed with ketone 1a as the model substrate (Fig. 4). Both electron-donating and electron-withdrawing groups were well tolerated in the reaction with the former ones giving relatively higher yields of the aromatic C–H addition products (3v-A). Ortho- and meta-substituents on the benzene ring of imines showed comparable effect on the reaction yields (3v vs. 3B, 3C). Naphthyl imines with extended conjugation delivered the expected products smoothly (3D, 3E). It seemed that the steric hindrance had limited influence on the reaction outcome (3B, 3D). Heteroaromatic imine and p-tolylsulfonyl imine were also amenable to this protocol (3F, 3G). Unfortunately, aliphatic imines failed to afford the corresponding products under the reaction conditions.
When a chiral ketone, 1C of 96% ee, was used as a substrate and treated with imine 2a under the similar reaction conditions, the corresponding ortho-aminoalkylated product 3H was isolated in 66% yield with a dr value of 9.4:1 (Fig. 5). The major diastereo-isomer of 3H was in 96% ee, which reflected the ee value of ketone 1C. Furthermore, the structural configuration of the major diastereo-isomer was confirmed by single-crystal X-ray diffraction analysis.
Interestingly, the exo-olefinic isoindoline products 4 could be selectively obtained from the reactions of imines and aryl alkyl ketones bearing α-C–H bonds by slightly tuning the reaction conditions (Fig. 6). Specifically, acetophenone 1v was treated with imine 2a at 60 °C for 2 h under the otherwise same conditions giving exo-olefinic isoindoline 4a in 66% isolated yield. The structure of 4a was unambiguously confirmed by single-crystal X-ray diffraction analysis. Introducing a methyl group into the para, meta, or ortho position of acetophenone resulted in the formation of the expected products successfully (4b–d). Remarkably, the reaction of propiophenone with imine 2a provided exclusively isoindoline 4e with an E-configuration of the exo-cyclic C = C bond, which was again unambiguously confirmed by single-crystal X-ray diffraction analysis. The steric compulsion between the methyl group and (2-thienyl)sulfonyl group might account for the observed configuration of the double bond. 1-Tetralone and 1-benzosuberone were also proved to be suitable substrates affording the corresponding tricyclic products successfully under the slightly modified reaction conditions (4f, 4g). A series of imines bearing electronically varied functional groups were applicable to this reaction leading to the expected exo-olefinic isoindoline products smoothly (4h–l). p-Tolylsulfonyl imine was again susceptible to the reaction conditions giving the corresponding product in comparable yield (4m).
During our further investigations on the reaction parameters, we surprisingly found that a three-component reaction of ketone, imine, and dimethylzinc could be achieved simply by utilizing two equivalents of dimethylzinc at an elevated temperature under the otherwise same conditions (Fig. 7). Thus, a range of isoindolines bearing a tetra-substituted carbon center could be easily accessed from simple ketones and imines with moderate to good diastereoselectivity (5a–g). The structures of the major cis-diastereoisomers 5c and 5d were both confirmed by single-crystal X-ray diffraction analysis. It should be noted that the use of t-butyl phenyl ketone 1a could not afford the corresponding three-component product presumably due to the increased steric hindrance of the congested tetra-substituted carbon center.
Mechanistic studies
To clarify the possible reaction pathways, a range of mechanistic experiments were conducted. First, the stoichiometric reaction of ketone 1a with MnBr(CO)5 was examined and no product was detected (Fig. 8a). While no reaction occurred with the assistance of ZnBr2, the addition of Me2Zn to the reaction resulted in the formation of five-membered manganacycle Mn-I in 28% isolated yield. Also, enolizable acetophenone 1v could delivered the corresponding manganacycle Mn-I′ in comparable yield, whose structure was confirmed by single-crystal X-ray diffraction analysis. MnMe(CO)5, generated in situ from the transmetalation of MnBr(CO)5 with Me2Zn, might play a critical role in the step of C–H bond cleavage35. Second, treatment of Mn-I with imine 2a afforded the C–H addition product 3a in 27% 1H NMR yield (Fig. 8b). The reaction yields could be further improved by adding either Me2Zn or ZnBr2. Finally, the reactions of ketone 1a and imine 2a using manganacycle Mn-I or MnMe(CO)5 as a catalyst were examined and the corresponding product 3a was formed in 74 and 80% yield, respectively (Fig. 8c). These results suggested that both the manganacycle Mn-I and MnMe(CO)5 might be the key intermediates in the reaction.
Furthermore, deuterium-labeling experiments were carried out in order to probe the nature of the C–H bond cleavage. First, tert-butyl(pentadeuteriophenyl)methone 1a- d 5 was prepared and then subjected to the reaction conditions (Fig. 9a). No loss of deuterium was observed at the ortho positions of 1a- d 5 , which suggested an irreversible C–H bond cleavage step in the reaction. Next, two parallel reactions of 1a and 1a- d 5 with imine 2a respectively were conducted (Fig. 9b). As a result, a kinetic isotope effect (KIE) value of 3.2 implied the C–H bond cleavage might be involved in the turnover-limiting step or in a prior step with a lower activation barrier52.
Based on the above results and literature clues35,43,53, a plausible reaction mechanism was depicted in Fig. 10. The reaction starts with the formation of MnMe(CO)5 from MnBr(CO)5 and Me2Zn. It further reacts with ketone 1 to give five-membered manganacycle Mn-I followed by addition to imine 2 yielding seven-membered manganacycle Mn-II. Transmetalation of Mn-II with Me2Zn affords intermediate Mn-III, which undergoes a ligand exchange with substrate 1 to produce species Mn-IV and Zn-I. An intramolecular C–H activation occurs in Mn-IV regenerating Mn-I and releasing methane35. Hydrolysis of Zn-I gives product 3. Meanwhile, Zn-I may also undergo an intramolecular cyclization to yield intermediate Zn-II, which is followed by either an elimination of zinc salt giving exo-olefinic isoindoline 4 or an intermolecular nucleophilic substitution with Me2Zn forming isoindoline 5 under well-controlled reaction conditions.
Discussion
In conclusion, aromatic C–H addition of ketones to imines was developed via manganese catalysis, which enabled to reverse the reactivity of labile C(sp3)–H bonds α to the carbonyl and inert C(sp2)–H bonds on the benzene ring of ketones. Thus, the classic Mannich reaction was completely depressed and a series of valuable products, namely the ortho-C–H aminoalkylated ketones, cyclized exo-olefinic isoindolines, and three-component methylated isoindolines, can be selectively achieved. Meanwhile, this protocol also represents a manganese-catalyzed aromatic C–H bond transformation of ketones since the parent stoichiometric cyclomanganation reaction was reported in 197544,45. Further explorations on the manganese-catalyzed C–H activation reactions of ketones are underway in our laboratory.
Methods
General procedure for the formation of products 3
To a 25 ml flame-dried Schlenk tube was added ZnBr2 (0.5 mmol, 112.5 mg, stored in glove box), MnBr(CO)5 (0.05 mmol, 10.0 mol%, 13.8 mg), DCE (1.25 mL), 2,2-dimethyl-1-phenylpropan-1-one 1a (1.5 mmol, 243.0 mg), (E)-N-benzylidenethiophene-2-sulfonamide 2a (0.5 mmol, 125.5 mg), and Me2Zn (0.75 mmol, 1.2 M in toluene, 0.625 mL) sequentially under nitrogen. The tube was sealed and stirred at 60 °C for 10 h. After completion, the reaction mixture was diluted with ethyl acetate (5.0 mL) and filtered through a short pad silica gel washing with ethyl acetate (20 mL). The filtrate was concentrated and purified by silica gel column chromatography to provide the product 3a in 80% yield.
General procedure for the formation of products 4
To a Schlenk tube was added ZnBr2 (0.5 mmol, 112.5 mg), MnBr(CO)5 (0.05 mmol, 10.0 mol%, 13.8 mg), DCM (5.0 mL), acetophenone 1v (2.0 mmol, 240.0 mg), (E)-N-benzylidene thiophene-2-sulfonamide 2a (0.5 mmol, 125.5 mg), and Me2Zn (0.75 mmol, 1.2 M in toluene, 0.625 mL) sequentially under nitrogen. The tube was sealed and stirred at 60 °C for 2 h. After completion, the reaction mixture was diluted with ethyl acetate (10 mL) and filtered through a short pad silica gel washing with ethyl acetate (20 mL). The filtrate was concentrated and purified by silica gel column chromatography to provide 4a in 66% yield.
General procedure for the formation of products 5
To a Schlenk tube was added ZnBr2 (0.5 mmol, 112.5 mg), MnBr(CO)5 (0.05 mmol, 10.0 mol%, 13.8 mg), DCM (5.0 mL), propiophenone 1z (2.0 mmol, 276.0 mg), (E)-N-benzylidenethiophene-2 -sulfonamide 2a (0.5 mmol, 125.5 mg), and Me2Zn (1.0 mmol, 1.2 M in toluene, 0.83 mL) sequentially under nitrogen. The tube was sealed and stirred at 100 °C for 10 h. After completion, the reaction mixture was diluted with ethyl acetate (10 mL) and filtered through a short pad silica gel washing with ethyl acetate (20 mL). The filtrate was concentrated and purified by silica gel column chromatography to provide 5a in 63% yield (dr = 3.1:1).
Data availability
All data supporting the findings of this study are available within the article and its Supplementary Information file or from the authors on reasonable request.
Supplementary crystallographic information files, which include structure factors, have been deposited with the Cambridge Crystallographic Data Centre (CCDC) as deposition numbers CCDC 1563929, 3H; CCDC: 1532722, 4a; CCDC: 1532723, 4e; CCDC: 1532725, 5c; CCDC: 1532724, 5d; CCDC 1563930, Mn-I′. These data files can be obtained free of charge from http://www.ccdc.cam.ac.uk/data_request/cif.
References
Mannich, C. & Krösche, W. Ueber ein kondensationsprodukt aus formaldehyd, ammoniak und antipyrin. Arch. Pharm. 250, 647–667 (1912).
Michael, A., Bernhard, W. & Nikolaus, R. Modern variants of the Mannich reaction. Angew. Chem. Int. Ed. 37, 1044–1070 (1998).
Kobayashi, S. & Ishitani, H. Catalytic enantioselective addition to imines. Chem. Rev. 99, 1069–1094 (1999).
Huang, Z., Lim, H. N., Mo, F., Young, M. C. & Dong, G. Transition metal-catalyzed ketone-directed or mediated C–H functionalization. Chem. Soc. Rev. 44, 7764–7786 (2015).
Zheng, Q.-Z. & Jiao, N. Transition-metal-catalyzed ketone-directed ortho-C–H functionalization reactions. Tetrahedron Lett. 55, 1121–1126 (2014).
Murai, S. et al. Efficient catalytic addition of aromatic carbon-hydrogen bonds to olefins. Nature 366, 529–531 (1993).
Grellier, M. et al. Synthesis, neutron structure, and reactivity of the bis(dihydrogen) complex RuH2(η2-H2)2(PCyp3)2 stabilized by two tricyclopentylphosphines. J. Am. Chem. Soc. 127, 17592–17593 (2005).
Martinez, R. et al. C–C bond formation via C–H bond activation using an in situ-generated ruthenium catalyst. J. Am. Chem. Soc. 131, 7887–7895 (2009).
Santhoshkumar, R., Mannathan, S. & Cheng, C.-H. Cobalt-catalyzed hydroarylative cyclization of 1,6-enynes with aromatic ketones and esters via C–H activation. Org. Lett. 16, 4208–4211 (2014).
Shang, R., Ilies, L. & Nakamura, E. Iron-catalyzed ortho C–H methylation of aromatics bearing a simple carbonyl group with methylaluminum and tridentate phosphine ligand. J. Am. Chem. Soc. 138, 10132–10135 (2016).
Patureau, F. W., Basset, T. & Glorius, F. Rhodium-catalyzed oxidative olefination of C–H bonds in acetophenones and benzamides. Angew. Chem. Int. Ed. 50, 1064–1067 (2011).
Tanaka, K., Otake, Y., Wada, A., Noguchi, K. & Hirano, M. Cationic Rh(I)/modified-BINAP-catalyzed reactions of carbonyl compounds with 1,6-diynes leading to dienones and ortho-functionalized aryl ketones. Org. Lett. 9, 2203–2206 (2007).
Li, G. et al. Pd(II)-catalyzed C–H functionalizations directed by distal weakly coordinating functional groups. J. Am. Chem. Soc. 137, 4391–4397 (2015).
Kakiuchi, F., Kan, S., Igi, K., Chatani, N. & Murai, S. A ruthenium-catalyzed reaction of aromatic ketones with arylboronates: a new method for the arylation of aromatic compounds via C–H bond cleavage. J. Am. Chem. Soc. 125, 1698–1699 (2003).
Kakiuchi, F., Matsuura, Y., Kan, S. & Chatani, N. A RuH2(CO)(PPh3)3-catalyzed regioselective arylation of aromatic ketones with arylboronates via carbon−hydrogen bond cleavage. J. Am. Chem. Soc. 127, 5936–5945 (2005).
Gandeepan, P., Parthasarathy, K. & Cheng, C.-H. Synthesis of phenanthrone derivatives from sec-alkyl aryl ketones and aryl halides via a palladium-catalyzed dual C–H bond activation and enolate cyclization. J. Am. Chem. Soc. 132, 8569–8571 (2010).
Xiao, B., Gong, T.-J., Xu, J., Liu, Z.-J. & Liu, L. Palladium-catalyzed intermolecular directed C–H amidation of aromatic ketones. J. Am. Chem. Soc. 133, 1466–1474 (2011).
Shin, K., Baek, Y. & Chang, S. Direct C–H amination of arenes with alkyl azides under rhodium catalysis. Angew. Chem. Int. Ed. 52, 8031–8036 (2013).
Kim, J. & Chang, S. Iridium-catalyzed direct C–H amidation with weakly coordinating carbonyl directing groups under mild conditions. Angew. Chem. Int. Ed. 53, 2203–2207 (2014).
Schroeder, N., Wencel-Delord, J. & Glorius, F. High-yielding, versatile, and practical [Rh(III)Cp*]-catalyzed ortho bromination and iodination of arenes. J. Am. Chem. Soc. 134, 8298–8301 (2012).
Shan, G., Yang, X., Ma, L. & Rao, Y. Pd-catalyzed C–H oxygenation with TFA/TFAA: expedient access to oxygen-containing heterocycles and late-stage drug modification. Angew. Chem. Int. Ed. 51, 13070–13074 (2012).
Mo, F., Trzepkowski, L. & Dong, G. Synthesis of ortho-acylphenols via Pd-catalyzed ketone-directed hydroxylation of arenes. Angew. Chem. Int. Ed. 52, 13075–13079 (2012).
Thirunavukkarasu, V. S. & Ackermann, L. Ruthenium-catalyzed C–H bond oxygenations with weakly coordinating ketones. Org. Lett. 14, 6206–6209 (2012).
Itoh, H., Kikuchi, T., Ishiyama, T. & Miyaura, N. Iridium-catalyzed ortho-C–H borylation of aryl ketones with bis(pinacolato)diboron. Chem. Lett. 40, 1007–1008 (2011).
Padala, K. & Jeganmohan, M. Ruthenium-catalyzed ortho-alkenylation of aromatic ketones with alkenes by C–H bond activation. Org. Lett. 13, 6144–6147 (2011).
Engle, K. M., Mei, T.-S., Wasa, M. & Yu, J.-Q. Weak coordination as a powerful means for developing broadly useful C–H functionalization reactions. Acc. Chem. Res. 45, 788–802 (2012).
Wang, C. Manganese-mediated C–C bond formation via C–H activation: from stoichiometry to catalysis. Synlett 24, 1606–1613 (2013).
Liu, W. & Ackermann, L. Manganese-catalyzed C–H activation. ACS Catal. 6, 3743–3752 (2016).
Chen, H. & Hartwig, J. F. Catalytic, regiospecific end-functionalization of alkanes: rhenium-catalyzed borylation under photochemical conditions. Angew. Chem. Int. Ed. 38, 3391–3393 (1999).
Kuninobu, Y., Nishina, Y., Takeuchi, T. & Takai, K. Manganese-catalyzed insertion of aldehydes into a C–H bond. Angew. Chem. Int. Ed. 46, 6518–6520 (2007).
Zhou, B., Chen, H. & Wang, C. Mn-catalyzed aromatic C–H alkenylation with terminal alkynes. J. Am. Chem. Soc. 135, 1264–1267 (2013).
Zhou, B., Ma, P., Chen, H. & Wang, C. Amine-accelerated manganese-catalyzed aromatic C–H conjugate addition to α,β-unsaturated carbonyls. Chem. Commun. 50, 14558–14561 (2014).
He, R., Huang, Z., Zheng, Q. & Wang, C. Manganese-catalyzed dehydrogenative [4 + 2] annulation of N-H imines and alkynes by C–H/N–H activation. Angew. Chem. Int. Ed. 53, 4950–4593 (2014).
He, R. et al. Mn-catalyzed three-component reactions of imines/nitriles, Grignard reagents, and tetrahydrofuran: an expedient access to 1,5-amino/keto alcohols. J. Am. Chem. Soc. 136, 6558–6561 (2014).
Zhou, B., Hu, Y. & Wang, C. Manganese-catalyzed direct nucleophilic C(sp2)–H addition to aldehydes and nitriles. Angew. Chem. Int. Ed. 54, 13659–13663 (2015).
Yang, X., Jin, X. & Wang, C. Manganese-catalyzed ortho-C–H alkenylation of aromatic N–H imidates with alkynes: versatile access to mono-alkenylated aromatic nitriles. Adv. Synth. Catal. 358, 2436–2442 (2016).
Liu, W., Zell, D., John, M. & Ackermann, L. Manganese-catalyzed synthesis of cis-β-amino acid esters through organometallic C–H activation of ketimines. Angew. Chem. Int. Ed. 54, 4092–4096 (2015).
Liu, W., Bang, J., Zhang, Y. & Ackermann, L. Manganese(I)-catalyzed C−H aminocarbonylation of heteroarenes. Angew. Chem. Int. Ed. 54, 14137–14140 (2015).
Liu, W., Richter, S. C., Zhang, Y. & Ackermann, L. Manganese(I)-catalyzed substitutive C−H allylation. Angew. Chem. Int. Ed. 55, 7747–7750 (2016).
Liang, Y.-F., Massignan, L., Liu, W. & Ackermann, L. Catalyst-guided C = Het hydroarylations by manganese-catalyzed additive-free C−H activation. Chem. Eur. J. 22, 14856–14859 (2016).
Shi, L., Zhong, X., She, H., Lei, Z. & Li, F. Manganese catalyzed C–H functionalization of indoles with alkynes to synthesize bis/trisubstituted indolylalkenes and carbazoles: the acid is the key to control selectivity. Chem. Commun. 51, 7136–7139 (2015).
Sueki, S., Wang, Z. & Kuninobu, Y. Manganese- and borane-mediated synthesis of isobenzofuranones from aromatic esters and oxiranes via C–H bond activation. Org. Lett. 18, 304–307 (2016).
Yahaya, N. P. et al. Manganese(I)-catalyzed C−H activation: the key role of a 7-membered manganacycle in H-transfer and reductive elimination. Angew. Chem. Int. Ed. 55, 12455–12459 (2016).
McKinney, R. J., Firestein, G. & Kaesz, H. D. Metalation of aromatic ketones and anthraquinone with methylmanganese and methylrhenium carbonyl complexes. Inorg. Chem. 14, 2057–2061 (1975).
Gommans, L. H. P., Main, L. & Nicholson, B. K. Synthesis of o-deuterio- and o-halogeno-acetophenones via oxidation of η2-(2-acetylphenyl)tetracarbonylmanganese derivatives and the determination of a primary kinetic isotope effect in ortho-metallation of acetophenones. J. Chem. Soc. Chem. Commun. 1986, 12–13 (1986).
Tsai, A. S., Tauchert, M. E., Bergman, R. G. & Ellman, J. A. Rhodium(III)-catalyzed arylation of boc-imines via C−H bond functionalization. J. Am. Chem. Soc. 133, 1248–1250 (2011).
Tauchert, M. E., Incarvito, C. D., Rheingold, A. L., Bergman, R. G. & Ellman, J. A. Mechanism of the rhodium(III)-catalyzed arylation of imines via C–H bond functionalization: inhibition by substrate. J. Am. Chem. Soc. 134, 1482–1485 (2012).
Li, Y. et al. Rhodium-catalyzed direct addition of aryl C−H bonds to N-sulfonyl aldimines. Angew. Chem. Int. Ed. 50, 2115–2119 (2011).
Li, Y. et al. Mechanistic understanding of Rh-catalyzed N-sulfonylaldimine insertion into aryl C–H bonds. Chem. Sci. 3, 1634–1639 (2012).
Yoshino, T., Ikemoto, H., Matsunaga, S. & Kanai, M. A cationic high-valent Cp*CoIII complex for the catalytic generation of nucleophilic organometallic species: directed C−H bond activation. Angew. Chem. Int. Ed. 52, 2207–2211 (2013).
Gao, K. & Yoshikai, N. Cobalt-catalyzed arylation of aldimines via directed C–H bond functionalization: addition of 2-arylpyridines and self-coupling of aromatic aldimines. Chem. Commun. 48, 4305–4307 (2012).
Simmons, E. M. & Hartwig, J. F. On the interpretation of deuterium kinetic isotope effects in C−H bond functionalizations by transition-metal complexes. Angew. Chem. Int. Ed. 51, 3066–3072 (2012).
Liu, W., Richter, S. C., Mei, R., Feldt, M. & Ackermann, L. Synergistic heterobimetallic manifold for expedient manganese(I)-catalyzed C−H cyanation. Chem. Eur. J. 22, 17958–17961 (2016).
Acknowledgements
Financial support from the National Natural Science Foundation of China (21322203, 21272238, and 21521002) are gratefully acknowledged. We thank Mr. W. Bi (ICCAS) for the synthesis of ketone 1C and Prof. Z. Xi (PKU) and Dr. L. Liu (PKU) for the help in HPLC analysis. We also thank the Alexander von Humboldt Foundation for the Equipment Subsidy (GC-MS).
Author information
Authors and Affiliations
Contributions
B.Z. and C.W. conceived and designed the project. B.Z. and Y.H. performed the experiments. T.L. prepared some of starting materials. All authors participated in data analyses and discussions. B.Z. and C.W. co-wrote the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhou, B., Hu, Y., Liu, T. et al. Aromatic C-H addition of ketones to imines enabled by manganese catalysis. Nat Commun 8, 1169 (2017). https://doi.org/10.1038/s41467-017-01262-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-017-01262-4
This article is cited by
-
Alkynoates as Versatile and Powerful Chemical Tools for the Rapid Assembly of Diverse Heterocycles under Transition-Metal Catalysis: Recent Developments and Challenges
Topics in Current Chemistry (2021)
-
Mapping out the key carbon–carbon bond-forming steps in Mn-catalysed C–H functionalization
Nature Catalysis (2018)
-
Versatile and robust C–C activation by chelation-assisted manganese catalysis
Nature Catalysis (2018)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.