Abstract
MESSRS. E. R. WATTS & SON, LTD., 123 Camberwell Road, London, S.E.5, have designed and introduced a new type of bevel gauge which should prove a most valuable tool in the engineering workshop for the convenient and accurate measurement of angles. The instrument consists essentially of two straightedges hinged together by means of the protractor head and capable of being set at any desired angle. The principal feature of this bevel gauge is the circular scale, which is divided accurately on a glass annulus mounted inside the head. The graduations on this scale are read by means of a high-power magnifier attached to the head and giving a wide field of view. The scale is most conveniently observed by looking through the eyepiece when the instrument is held in front of a source of artificial light, and under these conditions angles can be measured to within one twelfth of a degree. The straight-edges or blades are made of hardened steel and one of them is capable of sliding, an arrangement which greatly extends the range of the instrument, and two sizes of blade are provided-6 in. and 12 in. The sliding blade is secured by an eccentric operated by a lever extending from the centre. When fitted with the short sliding blade, the dimensions of the gauge, closed, are 6½ in. x \(2\frac{3}{8}\) in. x 1¾ in and its accuracy in measurement is 5 minutes of angle. The blades are secured in angular position by means of a knurled ring concentric with and surrounding the protractor head so that, in all respects, this tool lends itself to rapid and convenient operation.
Article PDF
Rights and permissions
About this article
Cite this article
A New Universal Bevel Protractor. Nature 151, 78 (1943). https://doi.org/10.1038/151078c0
Issue Date:
DOI: https://doi.org/10.1038/151078c0