Abstract
IN some experiments made by us on the application of the electrometer triode to the measurement of the ionisation produced by radioactive substance and X-rays, alcohol xylol resistances of the order 103–106 megohms have been employed. A method of measuring such resistances has been devised, in which use is made of the very high grid-filament resistance of the triode. The arrangement is indicated in Fig. 1. R1 is a known resistance, R2 is the resistance to be determined. With the potentiometer short-circuited and the key K open, the normal anode current is first balanced by variation of the resistance Z in the short-circuit GZ, so that the galvanometer indicates zero. The key K is now closed, and the current in the circuit ER1 R2 alters the voltage of the grid by an amount equal to the voltage drop across R1. The anode current is thereby altered, and the galvanometer is deflected. The grid is now restored to its original potential, by applying to it a potential by means of the potentiometer P, the reading of the potentiometer e being a measure of the voltage across R1 Obviously then Resistances up to 106 megohms have been measured in this manner, the procedure being to construct a series of alcohol-xylol resistances of the order 102, 103, 104, and 105 megohms. The lowest of these is first compared with a standard resistance of 10 megohms. This is then used as a standard to measure the 103 megohms, the process being repeated for the higher resistance.
Similar content being viewed by others
Article PDF
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
TEEGAN, J., HAYES, N. Application of the Electrometer Triode to the Measurement of High Resistance. Nature 129, 508 (1932). https://doi.org/10.1038/129508a0
Issue Date:
DOI: https://doi.org/10.1038/129508a0
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.