Abstract
Water and alcohol, such as methanol or ethanol, are miscible and, individually, good solvents for poly(N-isopropylacrylamide) (PNIPAm), but this polymer precipitates in water–alcohol mixtures. The intriguing behaviour of solvent mixtures that cannot dissolve a given polymer or a given protein, while the same macromolecule dissolves well in each of the cosolvents, is called cononsolvency. It is a widespread phenomenon, relevant for many formulation steps in the physicochemical and pharmaceutical industry, that is usually explained by invoking specific chemical details of the mixtures: as such, it has so far eluded any generic explanation. Here, by using a combination of simulations and theory, we present a simple and universal treatment that requires only the preferential interaction of one of the cosolvents with the polymer. The results show striking quantitative agreement with experiments and chemically specific simulations, opening a new perspective towards an operational understanding of macromolecular solubility.
Similar content being viewed by others
Introduction
Stimuli-responsive polymers, often referred to as smart polymers, are macromolecular systems whose structure, function and stability are intimately linked to external parameters, such as temperature, external fields, ionic strengths or cosolvent concentrations1,2. This is the origin of the responsiveness of hydrogels exposed to external stimuli or concentration gradients3,4,5,6 and denaturation of proteins7,8,9. One of the solvents is usually water, however, the responsiveness is not necessarily restricted to water-soluble polymers. While understanding the physical behaviour of smart polymers is theoretically challenging, they experience a wide variety of applications that range from biology to physics. For example, smart polymers can be used for bio-interfaces, sensors, regulating cell culture, drug delivery, artificial muscle tissue, surface adhesion and wetting, to name a few1,10,11. Thus, a more thorough and generally applicable understanding of their properties is highly desirable.
Most common stimuli-responsive polymers display a transition from an extended coil structure at low temperature to a compact globule when temperature is increased, thus presenting a lower critical solution temperature (LCST). There are many examples of polymers that have a LCST, such as poly(N-isopropylacrylamide) (PNIPAm), poly(N,N-diethylacrylamide), poly(N-vinlycaprolactam), and/or poly(acryloyl-L-proline methyl ester) (PAPOMe), where PNIPAm is one of the most commonly known stimuli-responsive polymer. There has been long standing interest in studying PNIPAm in water and/or in mixed solvents by means of experiment3,4,6,12, theory3,13,14 and computer simulation15,16,17. In pure water, PNIPAm has a LCST of 305 K13,15. Moreover, if methanol is added to the water as cosolvent, PNIPAm shows an interesting re-entrant coil–globule–coil transition with increasing methanol mole fraction xm4,6,12 at ambient temperature. So does PAPOMe in aqueous methanol18. Furthermore, mixed solvents also play a role in completely different areas of soft-matter research and technology, such as organic electronics19. It has been observed that the solution viscosity of polymeric semiconductors can display a nonmonotonic dependency on cosolvent concentration, implying conformational changes of the polymer19 and indicating that such phenomena are by no means restricted to the ‘so called’ stimuli-responsive polymers. Theoretical investigations typically concentrate on either a Flory–Huggins type analysis3,20 or cooperative hydrogen-bonding effects14, while simulations usually deal with all-atom descriptions15,16. More recently, two of us have proposed a semi-grand canonical multi-scale approach to study PNIPAm in aqueous methanol and have shown that the coil–globule–coil transition can be linked to the delicate balance of intermolecular interactions between PNIPAm–methanol and PNIPAm–water17. The method considered chemical details only within the correlation length originating from the solute structure, which was coupled to a semi-grand canonical particle reservoir.
The aim of this work is to propose a general concept for polymers in mixed solvents, which can account for the phenomenon of coil–globule–coil scenario in mixed (good) cosolvents. We show that due to the discrete nature of solute–(co)solvent coordination, mean-field-type arguments may not be sufficient to describe the conformational behaviour of stimuli-responsive polymers. Instead, a discrete-particle-based explanation is needed, which will be provided in this work. By this, we demonstrate that the origin of this swelling–collapse–swelling transition is generic and that many polymers can be expected to display similar conformational transitions, as long as there is a preferential coordination between the macromolecule and one of the cosolvents.
Results
Conformation of polymer
We first demonstrate that our simple model is capable of reproducing the essentials of the experimentally observed re-entrant coil–globule–coil scenario of PNIPAm and PAPOMe in aqueous methanol4,6,18. In Fig. 1a, we summarize the radius of gyration Rg as a function of cosolvent molar concentration xc, where we compare the data from the generic bead-spring model with the experimentally observed degrees of swelling q6,18 and our previous multi-scale simulation results17. It can be appreciated that the generic model reproduces the characteristic swelling–collapse–swelling transition of polymers in mixed solvents. Even when both solvents are individually good solvents for the polymer, their combination causes the chains to collapse in the apparent poor solvent at a concentration range 0.1<xc<0.5. The simple model is even in particularly good agreement with the experimental data of PNIPAm.
Radius of gyration Rg as a function of cosolvent molar concentration xc. The sizes of solvent s and cosolvent c components are chosen as 0.5σ and the interaction well depth between polymer p and c is taken as εpc=1.0ε. (a) shows results for chain length Nl=30. For comparison, we include data from the semi-grand canonical multi-scale simulations with all-atom details17. We also include experimental data obtained from the degree of volume swelling ratio q for PNIPAm6 and PAPOMe18. For representative purposes, the data from the multi-scale simulations and PAPOMe are shifted. The arrows indicate the corresponding y axis. (b) shows Rg/Rg(xc=0) as a function of xc for two different chain lengths Nl. In both parts, the error bars are the s.d. calculated from six independent simulations. The lines are drawn to guide the eye.
The initial collapse transition on adding cosolvent is sharp and suggests a first-order-like scenario. Indeed, there are no indications of an extended blob structure known from a conventional Θ-collapse. Taking the degree of shrinking from Fig. 1b, we get [Rg/Rg(xc=0, N=30)]/[Rg/Rg(xc=0, N=100)]≅0.43 as expected for a good solvent coil to dense globule transition. More details of Rg as a function of Nl for coil and globule conformations are presented in the Supplementary Note 1 and Supplementary Fig. 1. In contrast, on further addition of (better) cosolvent between 0.5<xc<0.8, the polymer starts to expand again towards the fully expanded coil, however, in a much more gradual, certainly not first-order-like manner. The transition appears significantly shifted towards higher cosolvent concentration for N=100 and, contrary to normal critical phenomena, even somewhat smoother. To understand this counter-intuitive behaviour, we will come back to this scenario at a later stage.
Chemical potential of polymer
So far we have demonstrated that the generic model correctly reproduces the coil–globule–coil scenario. It, however, also reproduces a striking similarity of intermolecular affinity known from chemically specific system of PNIPAm in aqueous methanol17 (for more details see Supplementary Fig. 2 in Supplementary Note 2). Therefore, thermodynamic properties, such as the chemical potential of polymer μp that is intimately linked to relative (co)solvent interactions, should also display similarity with the all-atom data. A classic theory that connects intermolecular affinities in a solution to its thermodynamic properties is the fluctuation theory of Kirkwood and Buff21. If a polymer, p, at dilute concentration is solvated in a mixture of solvent s and cosolvent c, μp can be calculated using22,
![](http://media.springernature.com/lw319/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ1_HTML.gif)
where , and ρc is the cosolvent number density. Gij is the Kirkwood–Buff integral that is related to the pair distribution function gij(r) via
. The integration of equation 1 gives a direct estimate of the shift in
with increasing xc. In Fig. 2, we show a master plot of
as a function of xc. It can be appreciated that the data from a simple generic model are in reasonably good agreement with the data obtained from the simulations incorporating chemical details. The agreement is particularly striking within the range 0.1<xc<0.5 when the polymer collapses into a globule. Furthermore, a more detailed analysis of equation 1 suggests that for an ideal model case, when Gcs=Gcc, factor 1−ρc(Gcs−Gcc)=1. In all-atom descriptions of aqueous methanol, 1.0≤1−ρc(Gcs−Gcc)≤1.1 (ref. 17). This makes the denominator in equation 1 invariant, within the stochastic error bar, between 0.1<xc<0.5. Therefore, the shift in
is dominated by Gps−Gpc and the good agreement in Fig. 2 further suggests that the bead-spring model could capture the correct relative intermolecular affinity, which is an important factor in the occurrence of the re-entrant coil–globule–coil transition in mixed solvents. It is yet important to emphasize that the striking quantitative similarity between the generic simulation and the all-atom data is only made possible because of the comparable energy scale in both cases, which is of the order of 2κBT.
Chemical potential shift per monomer as a function of cosolvent mole fraction xc.
obtained from the generic model is compared with the data from the atomistic configuration of PNIPAm, which is taken from ref. 17. The master curve is obtained by normalizing the
with a chain length Nl-dependent function f(Nl)=2Nl/(Nl+1) (see Supplementary Note 3).
Another striking aspect of the variation in is that even when the polymer collapses into a compact globular structure, within the range 0.1<xc<0.5,
systematically decreases with increasing xc. Ideally, within a mean-field-type description, such as the Flory–Huggins theory3, one expects an increase in
when the polymer first collapses around xc≈0.1, then starts to decrease again for xc>0.5, see Supplementary Fig. 3. Here, however, we see a distinctly different behaviour, making the mean-field-type description highly unsuitable for understanding these complex discrete-particle-based phenomena. Therefore, a theoretical framework is needed where the particle-based preferential binding scenario can be incorporated. This is lacking in the literature and will be proposed below.
Discussion
We now develop a generic microscopic picture of the polymer conformation in mixed solvents. The compact globular structure is driven by the preferential attraction of cosolvent to the polymer. At low cosolvent concentration xc→0, c molecules can bind to two distinctly far monomers inducing bridges that initiate the collapsing process. At high concentrations, when a large number of c molecules is added (xc→1) they decorate the polymer and allow for the extended coil structure. In Fig. 3, we show simulation snapshots during polymer collapse for Nl=100.
Simulation snapshots showing dynamics of polymer collapse for chain length Nl=100 and at at a cosolvent mole fraction xc=0.1. Cosolvent particles are drawn within unity distance from the polymer. Snapshots are rendered at different times τ of production run: (a) t=100τ, (b) t=100τ, (c) t=750τ, (d) t=1,250τ and (e) final globular conformation, allowing for a ‘release’ of cosolvent particles. Similar behavior is observed for every case of globule conformation. However, for the clarity of representation, we choose xc=0.1.
It is apparent that the polymer collapse is initiated by several patches along the backbone. A significant Ω-type loop is visible at t=300τ (Fig. 3b) before finally collapsing into a compact globule (Fig. 3e). From Fig. 3, it is also evident that one can distinguish two types of cosolvent molecules among those that decorate the polymer. A fraction φB forms bridges between two (distinctly far) monomers and a fraction φ binds to one monomer only. In the collapsed state, one expects to see an increased value of φB. On the other hand when the polymer re-opens, bridging should vanish φB→0. In Fig. 4a, we show φB as a function of xc for Nl=100. As expected, the data (red stars) show a distinct hump between 0.1<xc<0.5 consistent with the collapsed conformation observed in Fig. 1. Figure 4a also shows that the strength of the effective negative excluded volume (green diamonds), extracted from the inverse variation of the gyration radius −≈[{Rg/Rg(xc=0)}−3−1], is proportional to φB.
(a) shows bridging fraction of cosolvents φB as a function of methanol mole fraction xc for Nl=100. The data corresponding to red stars is the direct calculation of φB from the simulation trajectory. For comparison, we have also shown the effective negative excluded volume, which can be calculated using the expression [{Rg/Rg(xc=0)}−3−1] (see green diamonds). Here Rg/Rg(xc=0) is taken from Fig. 1b. The prediction of analytical theory from equation 3 is plotted as solid line. b shows chemical potential of a single monomer μp as a function of xc. We also include the analytical expression in equation 4.
Using the information in Fig. 4a, we can now explain why we observe a smoother re-swelling for Nl=100 (Fig. 1b). It is evident that at xc=0.5 and 0.6, there are still a significant fraction of bridging cosolvents present, thus leading to a somewhat semi-collapsed and/or semi-extended structure. However, for Nl=30, we find vanishing φB between 0.5<xc<0.8 (data not shown) consistent with the fully extended structure. This observation is not surprising, given that the longer polymers have larger flexibility to form small segmental loops. Within a simple scaling argument, the loop formation can be characterized by the partition function of vanishing end-to-end distance Re→0, which reads . Here 1/Q is the critical fugacity and the universal exponent α≈0.223. Furthermore, the partition function at finite Re is given by
with γ=1.1523,24. From these two cases, one can estimate the free-energy barrier to form a loop of length Nl as Δ(Nl)=mκBT ln(Nl), with m=γ−α+1≈1.95 being the critical exponent23. For the segmental loop formation of length n, one can use the same expression as Δ(n)=mκBT ln(n). Therefore, this argument leads to an energy penalty for the loop formation, shown above, that is of the order of κBT.
Numerical simulation results thus show that the preferential adsorption of cosolvents onto the chain backbone controls both collapse and re-swelling of the polymer. This is the opposite of mean-field polymer theories, where polymer phase behaviour is dictated by the average field of cosolvent, irrespective of its spatial distribution within the solvation volume spread by the polymer chain. A simple theoretical description of cononsolvency can thus be formulated by considering the fractions φB and φ of cosolvent adsorbed onto the polymer backbone, while the remaining fraction of adsorption sites 1−φB−φ is occupied by the solvent molecules. The adsorption free energy per unit adsorption site reads,
![](http://media.springernature.com/lw391/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ2_HTML.gif)
where the first three terms in the right-hand side are entropic contributions, the factor 2 in the term for the mixing entropy accounts for the fact that a bridge occupies two sites on the polymer backbone, and the next two terms correspond to the adsorption energies B and that measure the excess affinities of individual bridging and non-bridging cosolvent molecules to the chain backbone. μ=κBT ln(xc) is the chemical potential of the cosolvent in the bulk solvent mixture. Crucially, one recognizes that the bridging affinity B is reduced with respect to 2 by the cost of loop formation, , where
and n=1/φB. Minimization of equation 2 with respect to φB and φ (that is, solving ∂Ψ/∂φ=∂Ψ/∂φB=0) results in an analytical relation between φB and xc, which reads
![](http://media.springernature.com/lw368/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ3_HTML.gif)
where and
. The solution of equation 3 is shown as a solid line in Fig. 4a with m=1.95 as expected23 and consistent with the bridging scenario. Not only does the theory show a striking similarity with the simulation data, but it also quantitatively predicts the variation of μp as a function of xc,
![](http://media.springernature.com/lw380/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ4_HTML.gif)
as shown in Fig. 4b.
In summary, we have performed molecular dynamics simulations of a generic bead-spring model to study the coil–globule–coil transition of macromolecules in mixed solvents. Though the simulation protocol is completely independent of chemical details, the simulations show striking quantitative agreement with the experimental data of PNIPAm and PAPOMe in aqueous methanol. Additionally, the simplified model also shows striking agreement with the competitive coordination of polymer known from the all-atom descriptions. This suggests that the origin of these complex, cosolvent-driven, conformational transitions is generic in nature and does not depend on the specific chemical details. Therefore, a broad range of polymeric systems are expected to demonstrate similar re-entrant behaviour, so long as there is a preferential cosolvent binding. This, however, does not mean that the solvent quality becomes poor, contrary to what is known from the present understanding. Instead, a polymer even collapses in a mixed ‘good’ solvent because of the preferential binding. Such discrete-particle-based phenomena cannot be explained with a mean-field-type picture. Therefore, we here propose a theoretical description based on the selective adsorption of the cosolvent with the polymer backbone that can describe the numerical results. We find that the coil–globule–coil scenario can be understood by the segmental loop formation, facilitated by the bridging cosolvents connecting two monomers that are far from one another along the backbone. The theory also helps to understand the counter-intuitive system size effect, namely the longer the chain the smoother the re-swelling transition at larger cosolvent concentrations. Usually, our simulations deal with one thermodynamic state point of temperature in a mixture of cosolvents and not with the temperature-induced polymer collapse. Furthermore, we would like to point out that although our results are compared and presented in the context of thermoresponsive polymers that have a LCST, such as PNIPAm and PAPOMe13,15,18, our findings are not restricted to these polymers, another classical example includes polymeric semiconductors19. Therefore, our results present a simple, yet effective, insight into the solubility behaviour of polymer and proteins, paving the ways for the development of accurate methods to control co(non)solvency in an applied environment.
Methods
Molecular dynamics simulations
We have used the well-known bead-spring polymer model25. In this model, individual monomers of a polymer interact with each other via a repulsive 6–12 Lennard-Jones (LJ) potential,
![](http://media.springernature.com/lw387/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ5_HTML.gif)
where εp=1.0ε and σp=1.0σ. All units are expressed in terms of the LJ energy ε, the LJ radius σ and the mass m of individual particles. This leads to a time unit of . Additionally, adjacent monomers in a polymer are connected via a finitely extensible nonlinear elastic potential,
![](http://media.springernature.com/lw377/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ6_HTML.gif)
where R0=1.5σ and k=30ε/σ2. The parameters of the potential are such that a reasonably large time step can be chosen, while bond crossing remains unlikely to occur.
A bead-spring polymer p is solvated in mixed solutions composed of two components also modelled as LJ beads, solvent s and cosolvent c, respectively. Note that for the study of macromolecules in aqueous methanol, the water molecules are referred as solvent and the methanols as cosolvent. Since the solvent molecules are much smaller than the monomers of PNIPAm and/or PAPOMe in aqueous methanol, we choose the size of solvents to be σs/c=0.5σ and the size of the monomers is σp=1.0σ. Based on the Kirkwood–Buff analysis of PNIPAm in aqueous methanol17, the system is set in such a manner that the two solvents are perfectly miscible, that is, they do not experience each other as different, while c is a somewhat better solvent than s. This is done by choosing the interactions between p and s to be a repulsive LJ potential,
![](http://media.springernature.com/lw411/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ7_HTML.gif)
with εps=1.0ε and σps=0.5σ. The p−c interaction uses a full LJ potential,
![](http://media.springernature.com/lw448/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ8_HTML.gif)
Unless stated otherwise, the interaction well depth between p and c is chosen as εpc=1.0ε with σpc=0.75σ. Solvent particles always repel each other with the same repulsive LJ,
![](http://media.springernature.com/lw394/springer-static/image/art%3A10.1038%2Fncomms5882/MediaObjects/41467_2014_Article_BFncomms5882_Equ9_HTML.gif)
with εij=1.0ε and σij=0.5σ. This is a good approximation given that the p−c interaction is dominant over s−s, s−c and c−c interactions. For more details, see the comparison of all-atom and experimental data presented in Supplementary Fig. 4 and the corresponding discussion in Supplementary Note 4.
The cosolvent mole fraction xc is varied from 0 (pure s component) to 1 (pure c component). We consider two different polymer chain lengths Nl=30 and 100, solvated in 2.5 × 104 solvent molecules for Nl=30 and 10 × 104 solvent molecules for Nl=100, respectively. The equations of motion are integrated using a velocity Verlet algorithm with a time step δt=0.005τ and a damping coefficient Γ=1.0τ−1 for the Langevin thermostat, with the temperature set to T=0.5ε/κB, where κB is the Boltzmann constant. The initial configurations are equilibrated for typically several 105τ, depending on the chain length, which is at least an oder of magnitude larger than the relaxation time in the system. After this initial equilibration averages are taken over another 104τ to obtain observables, especially gyration radii Rg, chemical potentials μp of the polymer and the bridging fractions of cosolvents φB. Simulations are performed using ESPResSo++ molecular dynamics package26 and the snapshots in this manuscript are rendered using VMD27.
Additional information
How to cite this article: Mukherji, D. et al. Polymer collapse in miscible good solvents is a generic phenomenon driven by preferential adsorption. Nat. Commun. 5:4882 doi: 10.1038/ncomms5882 (2014).
References
Cohen-Stuart, M. A. et al. Emerging applications of stimuli-responsive polymer materials. Nat. Mater. 9, 101 (2010).
Ward, M. A. & Georgiou, T. K. Thermoresponsive polymers for biomedical applications. Polymers 3, 1215 (2011).
Schild, H. G., Muthukumar, M. & Tirrell, D. A. Cononsolvency in mixed aqueous solutions of poly(N-isopropylacrylamide). Macromolecules 24, 948 (1991).
Zhang, G. & Wu, C. Reentrant coil-to-globule-to-coil transition of a single linear homopolymer chain in a water/methanol mixture. Phys. Rev. Lett. 86, 822 (2001).
Sagle, L. B. et al. Investigating the hydrogen bonding model of urea denaturation. J. Am. Chem. Soc. 131, 9304 (2009).
Walter, J., Sehrt, J., Vrabec, J. & Hasse, H. Molecular dynamics and experimental study of conformation change of poly(N-isopropylacrylamide) hydrogels in mixtures of water and methanol. J. Phys. Chem. B 116, 5251 (2012).
Bennion, B. J. & Daggett, V. The molecular basis for the chemical denaturation of proteins by urea. Proc. Natl Acad. Sci. USA 100, 5142 (2003).
Auton, M. & Wayne Bolen, D. Predicting the energetics of osmolyte-induced protein folding/unfolding. Proc. Natl Acad. Sci. USA 102, 15065 (2005).
Guinn, E. J., Pegram, L. M., Capp, M. W., Pollock, M. N. & Record, M. T. Quantifying why urea is a protein denaturant, whereas glycine betaine is a protein stabilizer. Proc. Natl Acad. Sci. USA 108, 16932 (2011).
Cui, S. et al. Unexpected temperature-dependent single chain mechanics of poly(N-isopropyl-acrylamide) in water. Langmuir 28, 5151 (2012).
de Beer, S., Kutnyanszky, E., Schön, P. M., Vancso, G. J. & Müser, M. H. Solvent-induced immiscibility of polymer brushes eliminates dissipation channels. Nat. Commun. 5, 3781 (2014).
Kojima, H., Tanaka, F., Scherzinger, C. & Richtering, W. Temperature dependent phase behavior of PNIPAM microgels in mixed water/methanol solvents. J. Pol. Sci. B 51, 1100 (2013).
Birshtein, T. M. & Pryamitsyn, V. A. Coil-globule type transitions in polymers. 2. Theory of coil-globule transition in linear macromolecules. Macromolecules 24, 1554 (1991).
Tanaka, F., Koga, T. & Winnik, F. M. Temperature-responsive polymers in mixed solvents: competitive hydrogen bonds cause cononsolvency. Phys. Rev. Lett. 101, 028302 (2008).
Walter, J., Ermatchkov, V., Vrabec, J. & Hasse, H. Molecular dynamics and experimental study of conformation change of poly(N-isopropylacrylamide) hydrogels in water. Fluid Phase Equi. 296, 164 (2010).
Tucker, A. K. & Stevens, M. J. Study of the polymer length dependence of the single chain transition temperature in syndiotactic poly(N-isopropylacrylamide) oligomers in water. Macromolecules 45, 6697 (2012).
Mukherji, D. & Kremer, K. Coil-globule-coil transition of PNIPAm in aqueous methanol: coupling all-atom simulations to semi-grand canonical coarse-grained reservoir. Macromolecules 46, 9158 (2013).
Hiroki, A., Maekawa, Y., Yoshida, M., Kubota, K. & Katakai, R. Volume phase transitions of poly(acryloyl-l-proline methyl ester) gels in response to water–alcohol composition. Polymer (Guildf) 42, 1863 (2001).
Hernandez-Sosa, G. et al. Rheological and drying considerations for uniformly gravure-printed layers: towards large-area flexible organic light-emitting diodes. Adv. Funct. Mat. 23, 3164 (2013).
Magda, J. J., Fredrickson, G. H., Larson, R. G. & Helfand, E. Dimensions of a polymer chain in a mixed solvent. Macromolecules 21, 726 (1988).
Kirkwood, J. G. & Buff, F. P. The statistical mechanical theory of solutions. J. Chem. Phys. 19, 774 (1951).
Rösgen, J., Pettitt, B. M. & Bolen, D. W. Protein folding, stability, and solvation structure in osmolyte solutions. Biophys. J. 89, 2988 (2005).
Des Cloizeaux, J. & Jannink, G. Polymers in Solution: Their Modelling and Structure Clarendon Press (1990).
de Gennes, P.-G. Scaling Concepts in Polymer Physics Cornell University Press (1979).
Kremer, K. & Grest, G. S. Dynamics of entangled linear polymer melts: a molecular dynamics simulation. J. Chem. Phys. 92, 5057 (1990).
Halverson, J. D. et al. ESPResSo++: a modern multiscale simulation package for soft matter systems. Comp. Phys. Comm. 184, 1129 (2013).
Humphrey, W., Dalke, A. & Schulten, K. VMD: visual molecular dynamics. J. Mol. Graph. 14, 33 (1996).
Acknowledgements
D.M. thanks Burkhard Dünweg and Martin Müser for stimulating discussions and Sissi de Beer for sending several experimental references. C.M.M. acknowledges Max-Planck Institut für Polymerforschung for hospitality where this work was performed. K.K. acknowledges research funding through the European Research Council under the European Union’s Seventh Framework Programme (EP7/2007-2013)/ERC grant agreement no. 340906-MOLPROCOMP. The completion of this work would have not been possible without untiring help of Torsten Stühn regarding the ESPResSo++ package, which we gratefully acknowledge. We thank Aoife Fogarty, Aviel Chaimovich and Nancy Carolina Forero-Martinez for critical reading of the manuscript.
Author information
Authors and Affiliations
Contributions
D.M. and K.K. designed research, D.M. performed research, D.M. and K.K. analysed data, C.M.M. developed theory and D.M., C.M.M. and K.K. wrote the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 1-4, Supplementary Notes 1-4 and Supplementary References (PDF 2194 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/
About this article
Cite this article
Mukherji, D., Marques, C. & Kremer, K. Polymer collapse in miscible good solvents is a generic phenomenon driven by preferential adsorption. Nat Commun 5, 4882 (2014). https://doi.org/10.1038/ncomms5882
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms5882
This article is cited by
-
Cononsolvency of poly(carboxybetaine methacrylate) in water–ethanol mixed solvents
Polymer Journal (2023)
-
Thermoresponsive and co-nonsolvency behavior of poly(N-vinyl isobutyramide) and poly(N-isopropyl methacrylamide) as poly(N-isopropyl acrylamide) analogs in aqueous media
Colloid and Polymer Science (2023)
-
Multi-scale computer-aided design and photo-controlled macromolecular synthesis boosting uranium harvesting from seawater
Nature Communications (2022)
-
Rheological design of thickened alcohol-based hand rubs
Rheologica Acta (2022)
-
Feasible Fabrication of Hollow Micro-vesicles by Non-amphiphilic Macromolecules Based on Interfacial Cononsolvency
Chinese Journal of Polymer Science (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.