Abstract
Silicon is a promising alternative to the conventional graphite anode in high-energy lithium-ion batteries owing to its high gravimetric capacity. However, intrinsic issues, such as severe volume expansion during cycling, have plagued the development of batteries that use Si anodes. While tremendous progress has been made in laboratories to tackle these issues, most Si-containing batteries in industry, in which Si anodes are made of Si suboxides or Si–C composites, can use only a very limited amount of Si. Here we review important factors that affect the practical energy density of Si-containing batteries, including electrode swelling and cut-off voltage in cell operation. We also discuss calendar life, safety and cost issues, which also have a strong influence on practical cell design. Furthermore, we propose testing protocols to evaluate the practical viability of newly developed Si anodes.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 digital issues and online access to articles
$119.00 per year
only $9.92 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Schmuch, R., Wagner, R., Hörpel, G., Placke, T. & Winter, M. Performance and cost of materials for lithium-based rechargeable automotive batteries. Nat. Energy 3, 267–278 (2018).
Cano, Z. P. et al. Batteries and fuel cells for emerging electric vehicle markets. Nat. Energy 3, 279–289 (2018).
Choi, J. W. & Aurbach, D. Promise and reality of post-lithium-ion batteries with high energy densities. Nat. Rev. Mater. 1, 16013 (2016).
Park, S. et al. Scalable synthesis of hollow β-SiC/Si anodes via selective thermal oxidation for lithium-ion batteries. ACS Nano 14, 11548–11557 (2020).
Son, Y., Sung, J., Son, Y. & Cho, J. Recent progress of analysis techniques for silicon-based anode of lithium-ion batteries. Curr. Opin. Electrochem. 6, 77–83 (2017).
Ma, J. et al. Strategic pore architecture for accommodating volume change from high Si content in lithium‐ion battery anodes. Adv. Energy Mater. 10, 1903400 (2020).
Lee, Y. et al. Stress relief principle of micron‐sized anodes with large volume variation for practical high‐energy lithium‐ion batteries. Adv. Funct. Mater. 30, 2004841 (2020).
Sung, J. et al. Fabrication of lamellar nanosphere structure for effective stress-management in large-volume-variation anodes of high-energy lithium-ion batteries. Adv. Mater. https://doi.org/10.1002/adma.201900970 (2019).
Heugel, P., Märkle, W., Deich, T., von Kessel, O. & Tübke, J. Thickness change and jelly roll deformation and its impact on the aging and lifetime of commercial 18650 cylindrical Li-ion cells with silicon containing anodes and nickel-rich cathodes. J. Energy Storage https://doi.org/10.1016/j.est.2022.105101 (2022).
Anseán, D. et al. Mechanistic investigation of silicon-graphite/LiNi0.8Mn0.1Co0.1O2 commercial cells for non-intrusive diagnosis and prognosis. J. Power Sources https://doi.org/10.1016/j.jpowsour.2020.227882 (2020).
Sturm, J. et al. Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon–graphite lithium-ion cell during fast charging. J. Power Sources 412, 204–223 (2019).
Li, X. et al. Degradation mechanisms of high capacity 18650 cells containing Si–graphite anode and nickel-rich NMC cathode. Electrochim. Acta 297, 1109–1120 (2019).
Lain, M. et al. Design strategies for high power vs high energy lithium ion cells. Batteries https://doi.org/10.3390/batteries5040064 (2019)
Chae, S., Choi, S. H., Kim, N., Sung, J. & Cho, J. Integration of graphite and silicon anodes for the commercialization of high‐energy lithium‐ion batteries. Angew. Chem. Int. Ed. 59, 110–135 (2020).
Chae, S., Ko, M., Kim, K., Ahn, K. & Cho, J. Confronting issues of the practical implementation of Si anode in high-energy lithium-ion batteries. Joule 1, 47–60 (2017).
Li, P., Kim, H., Myung, S.-T. & Sun, Y.-K. Diverting exploration of silicon anode into practical way: a review focused on silicon–graphite composite for lithium ion batteries. Energy Storage Mater. 35, 550–576 (2021).
Shen, X. et al. Research progress on silicon/carbon composite anode materials for lithium-ion battery. J. Energy Chem. 27, 1067–1090 (2018).
Yang, Y. et al. A review on silicon nanowire-based anodes for next-generation high-performance lithium-ion batteries from a material-based perspective. Sustain. Energy Fuels 4, 1577–1594 (2020).
Niu, C. et al. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles. Nat. Energy https://doi.org/10.1038/s41560-019-0390-6 (2019).
Liu, J. et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nat. Energy https://doi.org/10.1038/s41560-019-0338-x (2019).
Son, Y. et al. Reliable protocols for calculating the specific energy and energy density of Li-ion batteries. Mater. Today Energy 21, 100838 (2021).
Freunberger, S. A. True performance metrics in beyond-intercalation batteries. Nat. Energy https://doi.org/10.1038/nenergy.2017.91 (2017).
Gogotsi, Y. & Simon, P. True performance metrics in electrochemical energy storage. Science 334, 917–918 (2011).
Wu, Y. et al. In-situ investigations of the inhomogeneous strain on the steel case of 18650 silicon/graphite lithium-ion cells. Electrochim. Acta https://doi.org/10.1016/j.electacta.2020.137516 (2021).
Zhang, X. et al. Thickness evolution of commercial Li-ion pouch cells with silicon-based composite anodes and NCA cathodes. Sci. China Technol. Sci. 64, 83–90 (2020).
Ma, J. et al. Towards maximized volumetric capacity via pore-coordinated design for large-volume-change lithium-ion battery anodes. Nat. Commun. https://doi.org/10.1038/s41467-018-08233-3 (2019)
Prado, A. Y. R., Rodrigues, M.-T. F., Trask, S. E., Shaw, L. & Abraham, D. P. Electrochemical dilatometry of Si-bearing electrodes: dimensional changes and experiment design. J. Electrochem. Soc. https://doi.org/10.1149/1945-7111/abd465 (2020). This work provides specific information on electrode swelling and its dependence on electrode porosity and Si content.
Jeong, G., Lee, S. M., Choi, N. S., Kim, Y.-U. & Lee, C. K. Stabilizing dimensional changes in Si-based composite electrodes by controlling the electrode porosity: an in situ electrochemical dilatometric study. Electrochim. Acta 56, 5095–5101 (2011).
Sung, J. et al. Highly densified fracture‐free silicon‐based electrode for high energy lithium‐ion batteries. Batter. Supercaps 5, e202200136 (2022).
Cha, H. et al. Boosting reaction homogeneity in high‐energy lithium‐ion battery cathode materials. Adv. Mater. 32, 2003040 (2020).
Heubner, C. et al. From active materials to battery cells: a straightforward tool to determine performance metrics and support developments at an application‐relevant level. Adv. Energy Mater. 11, 2102647 (2021).
Homlamai, K. et al. Microcracking of Ni-rich layered oxide does not occur at single crystal primary particles even abused at 4.7 V. Chem. Commun. 58, 11382–11385 (2022).
Liu, Y., Harlow, J. & Dahn, J. Microstructural observations of ‘single crystal’ positive electrode materials before and after long term cycling by cross-section scanning electron microscopy. J. Electrochem. Soc. 167, 020512 (2020).
Gallagher, K. G. et al. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes. J. Electrochem. Soc. 163, A138–A149 (2015).
Günter, F. & Wassiliadis, N. State of the art of lithium-ion pouch cells in automotive applications: cell teardown and characterization. J. Electrochem. Soc. 169, 030515 (2022).
Lee, L. et al. Self-adaptive anode design with graphene-coated SiOx/graphite for high-energy Li-ion batteries. Chem. Eng. J. https://doi.org/10.1016/j.cej.2022.136166 (2022). This study shows the volume expansion of SiOx/graphite electrodes.
Chae, S., Kim, N., Ma, J., Cho, J. & Ko, M. One-to-one comparison of graphite-blended negative electrodes using silicon nanolayer-embedded graphite versus commercial benchmarking materials for high-energy lithium-ion batteries. Adv. Energy Mater. https://doi.org/10.1002/aenm.201700071 (2017).
Müller, V. et al. Effects of mechanical compression on the aging and the expansion behavior of Si/C-composite|NMC811 in different lithium-ion battery cell formats. J. Electrochem. Soc. 166, A3796–A3805 (2019).
Louli, A. J., Ellis, L. D. & Dahn, J. R. Operando pressure measurements reveal solid electrolyte interphase growth to rank Li-ion cell performance. Joule 3, 745–761 (2019). This study shows the correlation between irreversible volume expansion and capacity loss, both of which are caused by the continuous formation of an SEI during cycling.
Sung, J. et al. Subnano-sized silicon anode via crystal growth inhibition mechanism and its application in a prototype battery pack. Nat. Energy 6, 1164–1175 (2021). This study shows the variation in the voltage profile of Si anodes with changing Si particle size and the dependence of the specific capacity on the Si content in the anodes.
Pietsch, P. et al. Quantifying microstructural dynamics and electrochemical activity of graphite and silicon–graphite lithium ion battery anodes. Nat. Commun. https://doi.org/10.1038/ncomms12909 (2016). This study quantifies the local electrochemical activity and microstructural changes of Si–graphite anodes during their (de)lithiation.
Chae, S. et al. Rational design of electrolytes for long-term cycling of Si anodes over a wide temperature range. ACS Energy Lett. 6, 387–394 (2021).
Obrovac, M. N. & Chevrier, V. L. Alloy negative electrodes for Li-ion batteries. Chem. Rev. 114, 11444–11502 (2014).
Singh, P. K., Kepler, K. D., Kumar, A. & Leng, Y. Evaluation and screening of Si-based anode materials in commercial Li-ion cells for electric vehicle applications. J. Appl. Electrochem. 52, 1691–1700 (2022).
Klett, M. et al. Electrode behavior re-visited: monitoring potential windows, capacity loss, and impedance changes in Li1.03(Ni0.5Co0.2Mn0.3)0.97O2/silicon–graphite full cells. J. Electrochem. Soc. 163, A875–A887 (2016). This study shows the open-circuit potentials of graphite and Si–graphite electrodes in three-electrode systems after different charging and discharging processes.
Kierzek, K. & Machnikowski, J. Factors influencing cycle-life of full Li-ion cell built from Si/C composite as anode and conventional cathodic material. Electrochim. Acta 192, 475–481 (2016).
Wagner, N. P., Asheim, K., Vullum-Bruer, F. & Svensson, A. M. Performance and failure analysis of full cell lithium ion battery with LiNi0.8Co0.15Al0.05O2 and silicon electrodes. J. Power Sources 437, 226884 (2019).
Klett, M., Gilbert, J. A., Pupek, K. Z., Trask, S. E. & Abraham, D. P. Layered oxide, graphite and silicon-graphite electrodes for lithium-ion cells: effect of electrolyte composition and cycling windows. J. Electrochem. Soc. 164, A6095–A6102 (2016).
Togasaki, N., Yokoshima, T. & Osaka, T. Detection of over-discharged nickel cobalt aluminum oxide lithium ion cells using electrochemical impedance spectroscopy and differential voltage analysis. J. Electrochem. Soc. https://doi.org/10.1149/1945-7111/ac1213 (2021).
Langner, T., Sieber, T. & Acker, J. Studies on the deposition of copper in lithium-ion batteries during the deep discharge process. Sci. Rep. 11, 6316 (2021).
McBrayer, J. D. et al. Calendar aging of silicon-containing batteries. Nat. Energy 6, 866–872 (2021).
Harlow, J. E. et al. A wide range of testing results on an excellent lithium-ion cell chemistry to be used as benchmarks for new battery technologies. J. Electrochem. Soc. 166, A3031–A3044 (2019).
Development of Lithium Electrode Based Cell and Manufacturing for Automotive Traction Applications, Appendix A—Lithium Electrode Based Cell Goals 54–58 (USABC, 2021).
Cunningham, B. Silicon and Intermetallic Anode Portfolio Strategy Overview (US Department of Energy, 2020).
Seitzinger, C. L. et al. Intrinsic chemical reactivity of silicon electrode materials: gas evolution. Chem. Mater. 32, 3199–3210 (2020).
Pekarek, R. T. et al. Intrinsic chemical reactivity of solid-electrolyte interphase components in silicon–lithium alloy anode batteries probed by FTIR spectroscopy. J. Mater. Chem. A 8, 7897–7906 (2020).
Veith, G. M. et al. Direct determination of solid-electrolyte interphase thickness and composition as a function of state of charge on a silicon anode. J. Phys. Chem. C 119, 20339–20349 (2015).
Yoon, I., Abraham, D. P., Lucht, B. L., Bower, A. F. & Guduru, P. R. In situ measurement of solid electrolyte interphase evolution on silicon anodes using atomic force microscopy. Adv. Energy Mater. 6, 1600099 (2016).
Aurbach, D. et al. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries. Electrochim. Acta 47, 1423–1439 (2002).
Xu, H. et al. Roll-to-roll prelithiation of Sn foil anode suppresses gassing and enables stable full-cell cycling of lithium ion batteries. Energy Environ. Sci. 12, 2991–3000 (2019).
Barré, A. et al. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications. J. Power Sources 241, 680–689 (2013).
Shin, H., Park, J., Sastry, A. M. & Lu, W. Effects of fluoroethylene carbonate (FEC) on anode and cathode interfaces at elevated temperatures. J. Electrochem. Soc. 162, A1683–A1692 (2015). This study shows the effects of the FEC additive on the anode and cathode at different temperatures.
Burns, J. et al. The impact of intentionally added water to the electrolyte of Li-ion cells. I. Cells with graphite negative electrodes. J. Electrochem. Soc. 160, A2281–A2287 (2013).
Ha, Y. et al. Effect of water concentration in LiPF6-based electrolytes on the formation, evolution, and properties of the solid electrolyte interphase on Si anodes. ACS Appl. Mater. Interfaces 12, 49563–49573 (2020).
Keil, P. et al. Calendar aging of lithium-ion batteries. J. Electrochem. Soc. 163, A1872–A1880 (2016).
Zülke, A. et al. High‐energy nickel–cobalt–aluminium oxide (NCA) cells on idle: anode‐ versus cathode‐driven side reactions. Batter. Supercaps 4, 934–947 (2021).
Schulze, M. C. et al. Silicon Consortium Project Calendar Aging Electrochemical Screening Protocol 1.2 (2021); https://www.nrel.gov/transportation/silicon-anode-consortium.html. This report proposes a test protocol to estimate the parasitic reactions of Si-based electrodes to calculate the exchange capacity during calendar aging.
Schulze, M. C. et al. Critical evaluation of potentiostatic holds as accelerated predictors of capacity fade during calendar aging. J. Electrochem. Soc. https://doi.org/10.1149/1945-7111/ac6f88 (2022).
Kalaga, K., Rodrigues, M.-T. F., Trask, S. E., Shkrob, I. A. & Abraham, D. P. Calendar-life versus cycle-life aging of lithium-ion cells with silicon–graphite composite electrodes. Electrochim. Acta 280, 221–228 (2018). This study applies a voltage-holding method to investigate the degradation of Si during calendar aging.
Yoon, T., Milien, M. S., Parimalam, B. S. & Lucht, B. L. Thermal decomposition of the solid electrolyte interphase (SEI) on silicon electrodes for lithium ion batteries. Chem. Mater. 29, 3237–3245 (2017).
Park, Y.-S. & Lee, S.-M. Thermal stability of lithiated silicon anodes with electrolyte. Bull. Korean Chem. Soc. 32, 145–148 (2011).
Li, W., Erickson, E. M. & Manthiram, A. High-nickel layered oxide cathodes for lithium-based automotive batteries. Nat. Energy 5, 26–34 (2020).
Liu, D. et al. Alkaline roasting approach to reclaiming lithium and graphite from spent lithium-ion batteries. ACS Sustain.Chem. Eng. 10, 5739–5747 (2022).
Jin, Y., Zhu, B., Lu, Z., Liu, N. & Zhu, J. Challenges and recent progress in the development of Si anodes for lithium‐ion battery. Adv. Energy Mater. 7, 1700715 (2017).
Greenwood, M., Wentker, M. & Leker, J. A bottom-up performance and cost assessment of lithium-ion battery pouch cells utilizing nickel-rich cathode active materials and silicon–graphite composite anodes. J. Power Sources Adv. https://doi.org/10.1016/j.powera.2021.100055 (2021). This study assesses the cost-effectiveness of pouch-type SiO–graphite-based full cells with various cathodes.
Park, S.-H. et al. High areal capacity battery electrodes enabled by segregated nanotube networks. Nat. Energy https://doi.org/10.1038/s41560-019-0398-y (2019).
Choi, S., Kwon, T.-W, Coskun, A. & Choi, J. W. Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries. Science 357, 279–283 (2017).
Acknowledgements
This work was supported by the BK21 Plus project in Korea (UNIST). This work was also supported by a research grant from the Gyeongsang National University in 2022. This work was also partly supported by an Institute for Information and Communications Technology Promotion (IITP) grant funded by the Korea Government (MIST) and a Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE, P0012748, 2023, The Competency Development Program for Industry Specialist).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Energy thanks Egbert Figgemeier, Nian Liu and Xingcheng Xiao for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Source Data Fig. 2
Statistical source data for Fig. 2.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kim, N., Kim, Y., Sung, J. et al. Issues impeding the commercialization of laboratory innovations for energy-dense Si-containing lithium-ion batteries. Nat Energy 8, 921–933 (2023). https://doi.org/10.1038/s41560-023-01333-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41560-023-01333-5
This article is cited by
-
Electrode Conditions of Lithium-Ion Cell for Achieving High Energy Density
Korean Journal of Chemical Engineering (2024)