Abstract
Three Polypropylene/Poly(ethylene-co-propylene) (PP/EPR) in-reactor alloys produced by a two-stage slurry/gas polymerization had different ethylene contents and mechanical properties, which were achieved by controlling the copolymerization time. The three alloys were fractionated into five fractions via temperature rising dissolution fractionation (TRDF), respectively. The chain structures of the whole samples and their fractions were analyzed using high-temperature gel permeation chromatography (GPC), Fourier transform infrared (FT-IR), 13C nuclear magnetic resonance (13C NMR), and differential scanning calorimetry (DSC) techniques. These three in-reactor alloys mainly contained four portions: ethylene-propylene random copolymer (EPR), ethylene-propylene (EP) segmented and block copolymers, and propylene homopolymer. The increased copolymerization time caused the increased ethylene content of the sample. The weight percent of EPR, EP segmented and block copolymer also became higher. The more EPR content indeed improves the toughness of the alloy but lowers its stiffness. Increasing the ethylene content in the EPR fraction and EP segmented and block copolymer, as well as the suitable content of EPR, is believed to be the key factors resulting in the excellent toughness-stiffness balance of in-reactor alloys.
Similar content being viewed by others
Article PDF
References
R. Greco, C. Mancarella, E. Martuscelli, G. Ragosta, and J. Yin, Polymer, 28, 1929 (1987).
L. DOrazio, C. Mancarella, E. Martuscelli, and F. Polato, Polymer, 32, 1186 (1991).
X. Zhang, F. Xie, Z. Pen, Y. Zhang, and W. Zhou, Eur. Polym. J., 38, 1 (2002).
K. Premphet and P. Horanont, Polymer, 41, 9283 (2000).
C. De Rosa, F. Auriemma, V. Vinti, A. Grassi, and M. Galimberti, Polymer, 39, 6219 (1998).
J. Xu and L. Feng, Polym. Int., 47, 433 (1998).
Z. Fu, Z. Fan, Y. Zhang, and J. Xu, Polym. Int., 53, 1169 (2004).
Z. Fu, L. Feng, Z. Fan, and Y. Zhang, J. Appl. Polym. Sci., 97, 640 (2005).
Q. Zheng, Y. Shangguan, S. Yan, Y. Song, M. Peng, and Q. Zhang, Polymer, 46, 3163 (2005).
Q. Dong, X. Wang, Z. Fu, J. Xu, and Z. Fan, Polymer, 48, 5905 (2007).
L. Wang and B. Huang, J. Polym. Sci., Part B: Polym. Phys., 28, 937 (1990).
P. Galli and J. Haylock, Makromol. Chem. Macromol. Symp., 63, 19 (1992).
H. Cai, X. Luo, D. Ma, J. Wang, and H. Tan, J. Appl. Polym. Sci., 71, 93 (1999).
J. Xu, L. Feng, S. Yang, Y. Wu, Y. Yang, and X. Kong . Polymer, 38, 4381 (1997).
Z. Fan, Y. Zhang, J. Xu, H. Wang, and L. Feng, Polymer, 42, 5559 (2001).
Y. Zhang, Z. Fan, and L. Feng, J. Appl. Polym. Sci., 84, 445 (2002).
H. Tan, L. Li, Z. Chen, Y. Song, and Q. Zheng, Polymer, 46, 3522 (2005).
H. Zhu, B. Monrabal, C. C. Han, and D. Wang, Macromolecules, 41, 826 (2008).
L. Wild and T. Ryle, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 18, 182 (1977).
A. J. Müller, Z. H. Hernández, M. L. Arnal, and J. J. Sánchez, Polym. Bull, 39, 465 (1997).
A. J. Müller and M. L. Arnal, Prog. Polym. Sci., 30, 559 (2005).
F. Zhang, Y. Gong, and T. He, Eur. Polym. J., 39, 2315 (2003).
S. Wang and D. Yang, J. Polym. Sci., Part B: Polym. Phys., 42, 4320 (2004).
B. Fillon, J. C. Wittmann, B. Lotz, and A. Thierry, J. Polym. Sci., Part B: Polym. Phys., 31, 1383 (1993).
M. Kioka, H. Makio, A. Mizuno, and N. Kashiwa, Polymer, 35, 580 (1994).
J. Xu, L. Feng, S. Yang, Y. Yang, and X. Kong, Macromolecules, 30, 7655 (1997).
Y. Liu and S. Bo, Int. J. Polym. Anal. Charact., 8, 225 (2003).
Y. Feng and J. N. Hay, Polymer, 39, 6723 (1998).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fan, Y., Zhang, C., Xue, Y. et al. Effect of Copolymerization Time on the Microstructure and Properties of Polypropylene/Poly (ethylene-co-propylene) In-Reactor Alloys. Polym J 41, 1098–1104 (2009). https://doi.org/10.1295/polymj.PJ2009150
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1295/polymj.PJ2009150
Keywords
This article is cited by
-
Polymerization of heterophasic propylene copolymer with Me2Si(2-Me-4-PhInd)2ZrCl2 supported on SiO2 and SiO2-MgCl2 carriers
Korean Journal of Chemical Engineering (2020)
-
Morphology and properties of PP in-reactor alloys prepared with a MgCl2/TiCl4/diisobutyl phthalate/phosphate tris-methylphenyl ester catalyst system
Chemical Research in Chinese Universities (2018)
-
A new approach to increase toughness of synthesized PP/EPR in-reactor blends by introducing a copolymerization step under low ethylene concentration
Journal of Polymer Research (2015)