Article
|
Open Access
Featured
-
-
Article
| Open AccessInfluence of low-cost Thai leucoxene minerals on the growth, bioactive compounds, and antibacterial activities of Chrysanthemum indium L. cuttings in in vitro culture
- Sorapong Pavasupree
- , Nattapong Chanchula
- & Porramain Porjai
-
Editorial
| Open AccessProspects of sustainable polymers
Synthetic polymers have shown a great impact on every aspect of our life and attained an exponential rise in their production and utilization in the past decades due to their durability, flexibility, moldability, and inexpensive nature. However, the use of natural polymers or development of safe and environment-friendly synthetic bio-based polymers is continuously undergoing for a sustainable future owing to the exhaustion of petroleum-based resources or fossil-based materials, disposal and economical concerns, including government guidelines. In this regard, the development of new sustainable polymers or materials will step up and build a genuinely circular economy by decreasing manufacture or utilization of fossil-based materials as limited reserves.
- Anuj Kumar
- , Vijay Kumar Thakur
- & Kwan-Soo Lee
-
Article
| Open AccessTuning the electronic properties and band offset of h-BN/diamond mixed-dimensional heterostructure by biaxial strain
- Yipu Qu
- , Hang Xu
- & Yuhuai Liu
-
Article
| Open AccessDesign and analysis of a complementary structure-based high selectivity tri-band frequency selective surface
- Zhiming Li
- , Xiaolong Weng
- & Mei Bi
-
Article
| Open AccessThe influence of hot isostatic pressing on precipitates, mechanical properties of Mg-12Gd-0.8Zn-0.4Zr (wt.%) alloy manufactured by sand casting
- Dan Wang
- , Chao Ma
- & Yangyang Yu
-
Article
| Open AccessProportioning optimization of transparent rock-like specimens with different fracture structures
- Jie Cui
- , Junshan Hao
- & Kuilong Wang
-
Article
| Open AccessIonic liquids adsorption and interfacial tension reduction for synthetic resinous and asphaltenic oils: salinity and pH effects
- Seyed Ehsan Moradi
- , Seyednooroldin Hosseini
- & Elias Ghaleh Golab
-
Article
| Open AccessOptimization and modelling of magnesium oxide (MgO) photocatalytic degradation of binary dyes using response surface methodology
- Hyeong Kwang Benno Park
- , Pushpendra Kumar
- & Anuruddh Kumar
-
Article
| Open AccessThe influence of nanosunflower ash and nanowalnut shell ash on sustainable lightweight self-compacting concrete characteristics
- Nahla Hilal
- , Nadhim Hamah Sor
- & Taher A. Tawfik
-
Article
| Open AccessImprovement of roughness in ultrasonic assisted magnetorheological finishing of small titanium alloy nuts by orthogonal test method
- Cheng Bi
- , Axiang Ji
- & Fenfen Zhou
-
Article
| Open AccessNeutron instrument concepts for a high intensity moderator at the European spallation source
- Stavros Samothrakitis
- , Mads Bertelsen
- & Markus Strobl
-
Article
| Open AccessBasic magnesium sulfate@TiO2 composite for efficient adsorption and photocatalytic degradation of 4-dodecylmorpholine in brine
- Zhongmei Song
- , Huifang Zhang
- & Zhijian Wu
-
Article
| Open AccessEnhancing physical characteristics and antibacterial efficacy of chitosan through investigation of microwave-assisted chemically formulated chitosan-coated ZnO and chitosan/ZnO physical composite
- Sara A. Ali
- , E. S. Ali
- & Moataz A. Elsawy
-
Article
| Open AccessEvaluating the effect of unidirectional loading on the piezoresistive characteristics of carbon nanoparticles
- Bruno Alderete
- , Frank Mücklich
- & Sebastian Suarez
-
Article
| Open AccessEnhanced Stability, Superior Anti-Corrosive, and Tribological Performance of Al2O3 Water-based Nanofluid Lubricants with Tannic Acid and Carboxymethyl Cellulose over SDBS as Surfactant
- Dieter Rahmadiawan
- & Shih-Chen Shi
-
Article
| Open AccessFormation mechanisms and environmental influences on the crystal growth of wulfenite
- Nik Gračanin
- , Matejka Podlogar
- & Nastja Rogan Šmuc
-
Article
| Open AccessOptimization of wear parameters for ECAP-processed ZK30 alloy using response surface and machine learning approaches: a comparative study
- Mahmoud Shaban
- , Fahad Nasser Alsunaydih
- & Yasmine El-Taybany
-
Article
| Open AccessHigh-performance optoelectronic and thermoelectric properties of transparent conductors based on Tl2O3 under pressure
- H. A. Rahnamaye Aliabad
- , A. Asadpour Arzefooni
- & P. Khosrojerdi
-
Article
| Open AccessNovel Cu(II)-based metal–organic framework STAM-1 as a sulfur host for Li–S batteries
- V. Niščáková
- , M. Almáši
- & A. S. Fedorková
-
Article
| Open AccessEfficacy evaluation of hydrogen peroxide disinfectant based zinc oxide nanoparticles against diarrhea causing Escherichia coli in ruminant animals and broiler chickens
- Walaa I. Ahmed
- , Asmaa N. Mohammed
- & AL-Shimaa A. Sleim
-
Article
| Open AccessGraphsene as a novel porous two-dimensional carbon material for enhanced oxygen reduction electrocatalysis
- Mohammadreza Hosseini
- , Maryam Soleimani
- & Mahdi Pourfath
-
Article
| Open AccessWater adsorption on surfaces of calcium aluminosilicate crystal phase of stone wool: a DFT study
- Thi H. Ho
- , Nguyen-Hieu Hoang
- & Thuat T. Trinh
-
Article
| Open AccessAn all phosphorene lattice nanometric spin valve
- P. Kumari
- , S. Majumder
- & S. J. Ray
-
Article
| Open AccessTumor growth-arrest effect of tetrahydroquinazoline-derivative human topoisomerase II-alpha inhibitor in HPV-negative head and neck squamous cell carcinoma
- Patrizia Sarogni
- , Nicoletta Brindani
- & Valerio Voliani
-
Article
| Open AccessInvestigation of damping coefficients for elastic collision particles utilizing the acoustic frequency sampling method
- Xinlin Shi
- , Wenzhen Zhong
- & Dengchao Sun
-
Article
| Open AccessSpallation and particles infusion into the extracorporeal circuit during CRRT: a preventable phenomenon
- Maria Cristina Ruffa
- , Giacomo Bignante
- & Gianluca Villa
-
Article
| Open AccessResearch on mix design and mechanical performances of MK-GGBFS based geopolymer pastes using central composite design method
- Ziqi Yao
- , Ling Luo
- & Changwei Qu
-
Article
| Open AccessNanoindentation into a bcc high-entropy HfNbTaTiZr alloy—an atomistic study of the effect of short-range order
- Iyad Alabd Alhafez
- , Orlando R. Deluigi
- & Eduardo M. Bringa
-
Article
| Open AccessCoupled responses of thermomechanical waves in functionally graded viscoelastic nanobeams via thermoelastic heat conduction model including Atangana–Baleanu fractional derivative
- Ahmed E. Abouelregal
- , Marin Marin
- & S. S. Askar
-
Article
| Open AccessStudying removal of anionic dye by prepared highly adsorbent surface hydrogel nanocomposite as an applicable for aqueous solution
- Aseel M. Aljeboree
- & Ayad F. Alkaim
-
Article
| Open AccessAdvanced mapping of inorganic treatments on porous carbonate stones by combined synchrotron radiation high lateral μXRPD and μXRF
- G. Massinelli
- , N. Marinoni
- & E. Possenti
-
Article
| Open AccessCalculating and analyzing time delay in zigzag graphene nanoscrolls based complementary metal-oxide-semiconductors
- Ali Sadeqian
- , Mohammad Taghi Ahmadi
- & Amir Musa Abazari
-
Article
| Open AccessLignin nanoparticles as a highly efficient adsorbent for the removal of methylene blue from aqueous media
- Reza Pourbaba
- , Ali Abdulkhani
- & Alireza Ashori
-
Article
| Open AccessExploring the preparation of YbBa2Cu3O7−y superconductor in flowing oxygen atmosphere
- Yanan Wang
- , Zerong Zhang
- & Qiuliang Wang
-
Article
| Open AccessThree-dimensional biphase fabric estimation from 2D images by deep learning
- Daniel Chou
- , Matias Etcheverry
- & Chloé Arson
-
Article
| Open AccessExploring the structural, mechanical, magneto-electronic and thermophysical properties of f electron based XNpO3 perovskites (X = Na, Cs, Ca, Ra)
- Sakshi Gautam
- & Dinesh C. Gupta
-
Article
| Open AccessPhysicochemical stability of bortezomib solutions for subcutaneous administration
- Ángela Gómez
- , Mª Cristina Benéitez García
- & María Esther Gil-Alegre
-
Article
| Open AccessComposition templating for heterogeneous nucleation of intermetallic compounds
- Zhongping Que
- , Yun Wang
- & X. R. Zhou
-
Article
| Open AccessPhase-change behavior of RuSbTe thin film for photonic applications with amplitude-only modulation
- Shogo Hatayama
- , Kotaro Makino
- & Yuta Saito
-
Article
| Open AccessLarge enhancement of red upconversion luminescence in beta Ba2Sc0.67Yb0.3Er0.03AlO5 phosphor via Mn2+ ions doping for thermometry
- Yongtao Liu
- , Bin Duan
- & Junshan Hu
-
Article
| Open AccessHigh-performance cementitious composites containing nanostructured carbon additives made from charred coal fines
- Yuan Gao
- , Viet Hung Pham
- & Christopher S. Matranga
-
Article
| Open AccessECG signal quality in intermittent long-term dry electrode recordings with controlled motion artifacts
- Atte Joutsen
- , Alper Cömert
- & Hannu Eskola
-
Article
| Open AccessFormations of force network and softening of amorphous elastic materials from a coarsen-grained particle model
- Rei Kurita
- , Yuto Tamura
- & Marie Tani
-
Article
| Open AccessComparative study of eco-friendly wire mesh configurations to enhance sustainability in reinforced concrete structures
- Misgina Mebrahtom
- , Yewuhalashet Fissha
- & Hajime Ikeda
-
Article
| Open AccessResearch on the effect of water-cooling steel pipe on preventing spontaneous combustion of coal pile and its thermal migration behavior
- Chunming Ai
- , Shuang Xue
- & Qinyuan Zhou
-
Article
| Open AccessAssessment of mechanical behavior of sprayed concrete reinforced with waste tire textile fibers
- Behzad Khosh
- & Hadi Atapour
-
Article
| Open AccessSimple and inexpensive microwave setup for industrial based applications: Quantification of flower honey adulteration as a case study
- Ugur C. Hasar
- , Hafize Hasar
- & Omar M. Ramahi
-
Article
| Open AccessMechanochemical synthesis of fluoride-ion conducting glass and glass–ceramic in ZrF4–BaF2 binary system
- Kota Motohashi
- , Hiroshi Higuchi
- & Akitoshi Hayashi
-
Article
| Open AccessSome properties of subclass of multivalent functions associated with a generalized differential operator
- Haewon Byeon
- , Manivannan Balamurugan
- & Walid Emam